The General Tab

The General dialog tab sets general properties for the selected fax channels.

1. Select a channel or range of channels.
2. Click the Properties button to view the properties associated with the selected channel(s).
3. Click the General tab.

Figure 67. Properties for Selected Fax Channels - General Tab

Enter a customer subscriber identification number (CSID) in the CSID edit box. The CSID is the fax channel identification number.

For a host system with multiple outgoing fax lines, the CSID should reflect the phone number of the incoming fax line. If no number is specified, the default CSID, "default CSID" is transmitted.

The ITU recommends that the CSID be set to the international phone number of the fax channel. The maximum length of the CSID is 20 characters.

NOTE:

Command values are blank if the specified channel(s) have conflicting values or if the command is not set.

The Channel Control area of the General tab allows the user to select two check boxes for the selected channel(s). Select one or both of the following Channel Control options:

Auto Answer	Select this option if you want the system software to automatically answer an incoming call.
Use Queue File	Select this option if you want the system software to poll the queue file for pending queue records. (Disable for GRT applications.)

The options selected in the Channel Control group sets the GFXSHUTDOWN command.

Select a country from the Country pull down menu for the selected fax channel(s).

NOTE:

The COUNTRY command should be set for the country model of the fax board, which is not necessarily the same as the country in which the board is operating.

This command is required to configure the fax modem for the different electrical specifications and compliance standards required by various countries.

NOTE:

The default value for this configuration parameter is United States and Canada.

You can change the Country code and the associated command by selecting from the following countries:

Table 22. Country Codes

COUNTRY	CODE		COUNTRY	CODE
Australia	61		Korea	82
Austria	43		Luxembourg	352
Bahrain	973		Malaysia	60
Belgium	32		Mexico	52
Canada	1		Netherlands	31
Chile	56		New Zealand	64
Czech Republic	42		Norway	47
Denmark	45		Poland	48
Finland	358		Portugal	351
France	33		Singapore	65
Germany	49		South Africa	27
Hong Kong	852		Spain	34
Hungary	36		Sweden	46
Iceland	354		Switzerland	41
Indonesia	62		Thailand	66
Israel	972		Turkey	9
Italy	39		United Kingdom	44
Japan	81		United States	1
Jordan	962		Europe	1000

NOTE:

Only the United States (1), Canada (1) and Europe (1000) country codes are supported in this release. Choosing an unsupported code defaults to the country code of 1.

Click here to contact Dialogic Customer Engineering