DM3 Boards (With and Without On-board Line Interface)

This includes the CPi/2400CT-T1, CPi/3000CT-E1, CPi/2400CT, and CPi/3000CT boards.

The following properties and commands described in Appendix B are supported.

NOTE:

Commands not listed below are ignored and behave in a neutral manner.

Table 24. DM3 Active Commands

Commands	Properties
CSID
GFXRECVPATH	Default x001P001 if x> 26, then xa001P01
GFXSHUTDOWN	2 and 3 as expected (no auto receive option)
NUMCHAN	Checked only at initialization time; no dynamic change
GFXFINE
GFXFORM	Supports 3, 4, 5. Default = 3
GFXHEADER
GFXLEFTMARGIN	Remark: Value has to be in 1 to 32 range
GFXTOPMARGIN	Remark: Value has to be in 0 to 32 range
GFXRIGHTMARGIN	Remark: Value has to be in 64 to 152 range
GFXEXTEND	Supports option 0 and 1
MODEMCONTROL 1074	Permanent CSID
MODEMCONTROL 1075	Numeric CSID
MODEMCONTROL 2050	Header
GFCCONTROL 36	Recv Page per file. Default = 1
GFCCONTROL 37	Multi page option. Default = 0
GFXFAXCONTROL 51	T.30 Timer T1
GFXFAXCONTROL 52	T.30 Timer T2
GFXFAXCONTROL 53	T.30 Timer T3
GFXFAXCONTROL 54	T.30 Timer T4
GFXFAXCONTROL 55	T.30 Timer T5
GFXFAXCONTROL 73	Sub-address delimiter. Default = #
GFXFAXCONTROL 75	Leading digit truncation. Default = 0
GFXECM	Supports option 0 and 1
GFXRECM	Supports option 0 and 1
GFXRT6	Supports option 0 and 1
GFXRTWOD	Supports option 0 and 1
GFXSCANTIME	Supports 0, 5, 10, 20, 40
GFXSECM	Supports option 0 and 1
GFXST6	Supports option 0 and 1
GFXSTWOD	Supports option 0 and 1
GFXMINRATE	Default = 2400
GFXMAXRATE	Default = 14400. Supports 2400, 4800, 7200, 9600 & 12000
GFXRLENGTH
GFXRWIDTH
CHANNEL	Using logical channel

Click here to contact Dialogic Customer Engineering