Table of Contents
- Purpose
- Intended Audience
- How to Use This Information
- Related Information
- 1.1. Installation Procedures
- 1.2. Configuration Procedures
- 2.1. Installing and Configuring the Hardware
- 2.1.1. Checking the Power and Cooling Requirements
- 2.1.2. Determining the Board Types
- 2.1.3. Selecting the Slot Location in the Chassis
- 2.1.4. Configuring a Mixed CT Bus/SCbus System
- 2.1.5. Understanding the CT Bus
- 2.1.6. Configuring and Installing BLT, PCI, and cPCI Boards
- 2.1.7. Interconnecting Boards via CT Bus or SCbus
- 2.1.8. Connecting to External Equipment
- 2.2. Determining Which Components to Install
- 2.2.1. Typical Installation
- 2.2.2. Complete Installation
- 2.2.3. Compact Installation
- 2.2.4. Custom Installation
- 2.3. Saving Existing Configuration Data
- 2.4. Uninstalling the Previous Version of the Software
- 2.5. Installing Intel Dialogic System Release 5.1.1 Software
- 3.1. Saving Existing Configuration Data
- 3.2. Installing Feature Pack 1
- 4.1. Starting the Intel Dialogic Configuration Manager (DCM)
- 4.2. Selecting the DM3 Configuration Files
- 4.3. Configuring and Installing Hardware Configurable Boards
- 4.4. Designating the Clock Source
- 4.4.1. Setting the Clock Source for H.100 and H.110 Mode Systems
- 4.4.2. Setting the Clock Source for SCbus Systems
- 4.5. Setting the Encoding Method for DM3 E-1 Applications
- 4.6. Configuring Digital Network Interface Parameters (Springware Boards)
- 4.7. Adjusting Voice Parameters (Springware Boards)
- 4.7.1. Frequency Shift Keying (FSK)
- 4.7.2. Signal Delay
- 4.7.3. Silence Compressed Record
- 4.7.4. Parameter File Order of Precedence
- 4.8. Configuring DM3 IPLink Network Interface Connector
- 4.9. Modifying Other DCM Property Sheet Parameters
- 4.10. Selecting Different DM3 Configuration Files
- 4.11. Verifying Device Names
- 4.11.1. Device Overview
- 4.11.2. Device Types
- 4.11.3. Sorting Devices on DM3 Boards
- 4.11.4. Sorting Devices on Springware Boards
- 4.11.5. Constructing Device Names
- 4.12. Installing the BRI/2 ISDN Network Adapter Driver
- 4.12.1. Procedure for Windows NT
- 4.12.2. Procedure for Windows 2000
- 4.13. Reserving TDM Bus Resources for Third Party Devices
- 4.14. Configuring the H.323 IP Stack
- 4.14.1. Modify the Embedded H.323 IP Stack Configuration File (config.val)
- 4.14.2. Run the Embedded H.323 Stack Configuration Utility (IPTConf.exe)
- 5.1. Starting and Stopping the Intel® Dialogic System
- 5.1.1. Initiating the Intel® Dialogic System
- 5.1.2. Automatic Startup Mode
- 5.2. Verifying that DM3 Boards are Operating
- 5.3. Running Demo Programs
- 5.4. Performance Monitoring
- 5.4.1. Initially Enabling Intel® Dialogic Performance Counters - Windows NT
- 5.4.2. Disabling Intel Dialogic Performance Counters - Windows NT
- 5.4.3. Re-enabling Intel Dialogic Performance Counters - Windows NT
- 5.4.4. Initially Enabling Intel® Dialogic Performance Counters - Windows 2000/Windows XP
- 5.4.5. Disabling Intel Dialogic Performance Counters - Windows 2000/Windows XP
- 5.4.6. Re-enabling Intel Dialogic Performance Counters - Windows 2000/Windows XP
- 5.5. Managing a System Remotely Using Windows 2000 Terminal Services
- 5.5.1. Special Configuration Considerations for Non-Plug and Play Drivers
- 5.6. Troubleshooting
- 5.6.1. Resolving Hardware Conflicts
- 5.6.2. Replacing CompactPCI Boards
- 5.6.3. Installing the Intel® Dialogic System Software with Terminal Services Running on Windows 2000
- 5.6.4. Installing a DM3 PCI or CompactPCI Board on a Windows 2000 System
- 6.1. Preparation
- 6.2. Determining Installation Requirements
- 6.2.1. Registering Network Server Share Name
- 6.2.2. Analyzing Node Configuration Requirements
- 6.3. Installing the SCX160 SCxbus Adapter
- 6.4. Initiating the Node Configuration Process
- 6.4.1. Configuring Global Map File
- 6.4.2. Configuring the Local Map File
- 6.4.3. Selecting Data Streaming (First Node Only)
- 6.4.4. Configuring Data Streams - Non-Blocked
- 6.4.5. Configuring Data Streams - Blocked
- 6.4.6. Configuring Clocking
- 6.4.7. Completing Node Configuration
- 6.5. Modifying a Multi-Node System
- 6.5.1. Adding New Nodes
- 6.5.2. Reconfiguring Nodes
- 6.6. Removing the SCX160 SCxbus Adapter
Click here to contact Telecom Support Resources
Copyright 2002, Intel Corporation
All rights reserved
This page generated September, 2002
