6.6. Removing the SCX160 SCxbus Adapter

When the SCX160 SCxbus Adapter is initially installed, a number of the standard files from the Intel Dialogic System Software are modified. To remove the SCX160 SCxbus Adapter in such a way as to restore these files, perform the following procedure:

1. Insert the Intel Dialogic System Software CD-ROM in your system. If the installation process does not start automatically when you insert the CD-ROM, locate the Setup.exe program on the CD-ROM and double-click it.

   Note: If you have Terminal Services running on Windows 2000, see Section 5.6.3, Installing the Intel® Dialogic System Software with Terminal Services Running on Windows 2000.

2. When the Setup Options dialog box appears, select Custom install.
3. In the Custom Component Selection dialog box, select all features you want to retain except for the SCX160 SCxbus Adapter.
4. Follow the instructions provided by the installation process. For help at any time during the installation process, click Help.

   When the installation process is complete, the SCX160 SCxbus Adapter files will have been removed from the system.

5. Manually delete the files listed in Table 14, SCX 160 SCxbus Adapter Files.
6. Copy the saved versions of the installed files for the Intel Dialogic System Software as follows:
   • Copy \Program Files\Dialogic\Bin\Scx_Sav\*.* to \Program Files\Dialogic\Bin.
   • Copy \Program Files\Dialogic\Lib\Scx_Sav\*.* to \Program Files\Dialogic\Bin and \Program Files\Dialogic\Lib.
   • Copy Msintf.dll from \Program Files\Dialogic\Lib\Scx_Sav to Winnt\System32.

     Copying these files restores your system to the Intel Dialogic System Software base setup.

7. Repeat the process described in this section for each node in the multi-node system.

Click here to contact Telecom Support Resources