5.2.  Demo Options

To specify certain options at run-time, launch the demo from the command line, using any of the switches listed in Table 1.  IP Mail Command Line Switches:

Table 1.  IP Mail Command Line Switches

Switch	Action	Default
-n	Sets the number of channels	The lesser of voice devices or IP devices
-c <filename>	Configuration file name	iptmail_r4.cfg
-d	Sets debug level: 0 = Fatal - used when there is a non-recoverable error 1 = Error - same as fatal; used when there is a non-recoverable error 2 = Warning - used when some problem or failure has occurred that doesn't affect the channel's normal action 3 = Trace - used at the start of any function, or upon the successful completion of a function 4 = Info - prints data related to a specific action	0
-l	Printouts will be printed into channel log files in the demo directory. -lall = log files will be created for all available channels -l<channel list> = log files will be created only for the channel ranges or channels specified in the list Note: If the "-l" option is not used, all printouts will be to the stdout for channels 1 and 2 only.	Disabled
-q	Enables Quality of Service feature	Disabled
-h or ?	Prints the command syntax to the screen	Off

Each channel is initialized and the log for channels 1 and 2 is displayed in a separate window. See Appendix A for the log file from one channel of a typical session receiving a call from the IP.

Click here to contact Telecom Support Resources