4.3. Demo Options

To specify certain options at run-time, launch the demo from a DOS command line, using any of the switches listed in Table 1. IPTMail Command Line Switches:

Table 1. IPTMail Command Line Switches

Switch	Action	Default
-n	Sets the number of channels	The lesser of Voice Devices or IP devices
-c <filename>	Configuration file name	IPTMail_R4.cfg
-d	Sets Debug Level: 0 = Fatal - used when there is a non-recoverable error 1 = Error - same as Fatal; used when there is a non-recoverable error 2 = Warning - used when some problem or failure has occurred, that doesn't affect the channel's normal action. 3 = Trace - used at the start of any function, or upon the successful completion of a function. 4 = Info - prints data related to a specific action	0
-l	Printouts will be printed into channel log files in the demo directory. -lall = log files will be created for all available channels -l<channel list> = log files will be created only for the channel ranges or channels specified in the list. Note: If the "-l" option is not used, all prints will be to the stdout for channels 1 and 2 only.	Disabled
-h or ?	Prints the command syntax to the screen	Off

Each channel is initialized and the log for channels one and two is displayed in a DOS window. See Appendix A for the log file from one channel of a typical session receiving a call from the IP.

Click here to contact Dialogic Customer Engineering