The following information illustrates the changes that need to be made to the configuration files and parameters to assure that your master clock node is set up properly. The master clock node needs to be automatically setup to provide master clock to the SCxbus network and thus enable data communications between nodes when the system is initialized.
A master clock node must be selected before data can be passed between nodes. For each node, you have the option of selecting whether the clock for a particular board will be either the master clock source or slaved to a clock reference provided on the SCbus or the SCxbus.
The SCX160 SCxbus Adapter clock mode(s) must be determined independently for both the SCbus and the SCxbus interfaces.
Click here to contact Dialogic Customer Engineering
Copyright 2001, Dialogic Corporation