#config-version=FGT_6000F-7.4.9-FW-build2829-250924
#buildno=2829

config load-balance flow-rule
    edit 1
        set status disable
        set ether-type ip
        set protocol udp
        set src-l4port 88
        set comment "kerberos src"
    next
    edit 2
        set status disable
        set ether-type ip
        set protocol udp
        set dst-l4port 88
        set comment "kerberos dst"
    next
    edit 3
        set status enable
        set ether-type ip
        set protocol tcp
        set src-l4port 179
        set comment "bgp src"
    next
    edit 4
        set status enable
        set ether-type ip
        set protocol tcp
        set dst-l4port 179
        set comment "bgp dst"
    next
    edit 5
        set status enable
        set ether-type ip
        set protocol udp
        set dst-l4port 520
        set src-l4port 520
        set comment "rip"
    next
    edit 6
        set status enable
        set ether-type ipv6
        set protocol udp
        set dst-l4port 521
        set src-l4port 521
        set comment "ripng"
    next
    edit 7
        set status enable
        set ether-type ipv4
        set protocol udp
        set src-l4port 67
        set dst-l4port 68
        set comment "dhcpv4 server to client"
    next
    edit 8
        set status enable
        set ether-type ipv4
        set protocol udp
        set src-l4port 68
        set dst-l4port 67
        set comment "dhcpv4 client to server"
    next
    edit 9
        set status disable
        set ether-type ip
        set protocol tcp
        set src-l4port 1723
        set comment "pptp src"
    next
    edit 10
        set status disable
        set ether-type ip
        set protocol tcp
        set dst-l4port 1723
        set comment "pptp dst"
    next
    edit 11
        set status enable
        set ether-type ip
        set protocol udp
        set dst-l4port 3784
        set comment "bfd control"
    next
    edit 12
        set status enable
        set ether-type ip
        set protocol udp
        set dst-l4port 3785
        set comment "bfd echo"
    next
    edit 13
        set status enable
        set ether-type ipv6
        set protocol udp
        set src-l4port 547
        set dst-l4port 546
        set comment "dhcpv6 server to client"
    next
    edit 14
        set status enable
        set ether-type ipv6
        set protocol udp
        set src-l4port 546
        set dst-l4port 547
        set comment "dhcpv6 client to server"
    next
    edit 15
        set status enable
        set ether-type ipv4
        set dst-addr-ipv4 224.0.0.0/4
        set comment "ipv4 multicast"
    next
    edit 16
        set status enable
        set ether-type ipv6
        set dst-addr-ipv6 ff00::/8
        set comment "ipv6 multicast"
    next
    edit 17
        set status disable
        set ether-type ipv4
        set protocol udp
        set dst-l4port 2123-2123
        set comment "gtp-c to primary blade"
    next
    edit 18
        set status enable
        set ether-type ip
        set protocol tcp
        set dst-l4port 1000-1000
        set comment "authd http to primary blade"
    next
    edit 19
        set status enable
        set ether-type ip
        set protocol tcp
        set dst-l4port 1003-1003
        set comment "authd https to primary blade"
    next
    edit 20
        set status enable
        set ether-type ip
        set protocol vrrp
        set forward-slot all
        set comment "vrrp to all blades"
        set priority 6
    next
    edit 21
        set status disable
        set ether-type ipv4
        set protocol udp
        set dst-l4port 8805-8805
        set comment "pfcp to primary blade"
    next
    edit 22
        set status enable
        set ether-type ip
        set protocol udp
        set dst-l4port 4784-4784
        set comment "Flow Rule for Multihop BFD"
    next
    edit 24
        set status disable
        set ether-type ipv4
        set protocol udp
        set src-l4port 2123-2123
        set comment "gtp-c response to primary blade"
    next
end