@(#) Export Tool 2         Ver. 88-02-22
######################## Export Tool 2 ########################
#                                                             #
#                        Export Tool 2                        #
#                                                             #
#                        Ver. 88-02-22                        #
#                                                             #
#  Copyright (C) 2018,2019, Hitachi,Ltd. All rights reserved  #
###############################################################

1. Introduction
  This attached document is describing as for the supported
  contents by the following program products.

   Export Tool 2   Ver. 88-02-22


2. Prerequisite operating system and Applying Processor
  - Windows 7(SP1)/8.1/10
  - Windows Server 2008R2(SP1)/2012(SP1)/2012R2(SP1)/2016
  - Solaris 10
  - Red Hat Enterprise Linux AS 6.2/7.3

  - More than JRE 1.8.0
      for Windows 7(SP1)/8.1/10 (32bit/64bit)
  - More than JRE 1.8.0
      for Windows Server 2008R2(SP1)/2012(SP1)/2012R2(SP1)/2016 (64bit)
  - More than JRE 1.8.0
      for Solaris 10 (32bit)
  - More than JRE 1.8.0
      for Red Hat Enterprise Linux AS 6.2/7.3 (64bit)

   Please refer to the manual for a detailed version.


3. Installation on the UNIX System

 < Installation >
  Install the new version of Export Tool 2 by following the installation
  procedure below.

 (1) Login with SuperUser.

 (2) Mount the CD-ROM.

 (3) Create a directory(ex. /monitor).
        # mkdir /monitor

 (4) Change the directory to the directory which is created (3).
        # cd /monitor

 (5) Input the command follows,
        # cp -r /(CD-ROM MountPoint)/program/monitor2 .

 (6) Change the directory to the directory which is /monitor/monitor2.
        # cd /monitor/monitor2

 (7) Give an execution authority for runUnix.sh
        # chmod a+x runUnix.sh

 < Removal >
  It is not necessary to remove it for new Export Tool 2 program installation.
  New installation will overwrite the older program.
  When you need to remove Export Tool 2 program, follow the procedure below.

 (1) Log-in as "root"

 (2) Execute the following commands:
        # cd /directory name which is created by (3)/monitor
        # rm -r *


4. Installation on the Windows System

 < Installation >
  Install the new version of Export Tool 2 by following the installation
  procedure below.

 (1) Logon with Administrator.

 (2) On Windows computer, create a directory to store the program of the export tool one newly.(ex. c:\monitor).

 (3) Insert the CD-ROM.

 (4) Copy \program\monitor2 directory of the CD-ROM to the directory which is created (2).
     (monitor2 directory implication, copy all directories of subordinates and all files)

 < Removal >
 (1) Remove the directory (which is created by (2) on installation action), and
     files and directories under the directory.


5. Software manual
  Please refer to the following manual for your using this program product.
   - Manual name      : Export Tool 2 User's Guide