==========================================================================
        S5B serials AST2500(A2) BMC FW Release v4.23.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 4.23.06
Release Date: 2018.06.22

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.21_01)

[Firmware Images]:
1. s5bxv4.23.06_rom.ima with checksum          : F1C9D6D0
2. s5bxv4.23.06_rom.ima with MD5 checksum      : c2566ad1b1991be68cc41def91dcbcd6
3. s5bxv4.23.06_rom.ima_enc with MD5 checksum  : eede26025889a3168d0411bec0646a13

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07
SKU8~9: v03

[Change/Add]: 
S5Bx:	
1. Add Redfish FirmwareBuildTime.
2. Remove force change password on first login after upgrading BMC.

[Bug Fixed]:
S5BH:
1. WebUI display problem.
2. Media Redirection bugs fixed.
3. Redfish bugs fixed. 

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select s5bxvXX.YY.ZZ_rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
	4. Please canceling preserve all configuration before upgrading this version BMC (if FW version is less v4.21.06).
	   Because of this version's BMC fixed and add lots of functions (i.e. add some ipmi lib part for Redfish using command to set preserve configuration), 
	   we suggest canceling preserve all configuration before upgrading this version BMC to avoid unexpected defect occured.
	5. Not support GPT image file when using the remote image funciotn. 
	6. please clear browser cache and cookies after finishing upgrades.
	7. Not support BMC FW downgrade with preservation.
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v4.22.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 4.22.06
Release Date: 2018.05.25

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.21_01)

[Firmware Images]:
1. s5bxv4.22.06_rom.ima with checksum          : F1E5ACDD
2. s5bxv4.22.06_rom.ima with MD5 checksum      : 0ccb4b204b4b6718ccb6ed2ef807447e
3. s5bxv4.22.06_rom.ima_enc with MD5 checksum  : aa1b7f02abace34642dcbe5a12a02d62

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07
SKU8~9: v03

[Change/Add]: 
S5Bx:	

[Bug Fixed]:
S5BH:
1. WebUI display problem.
2. BMC WebUI with Preserve BIOS NVRAM Region fail.

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select s5bxvXX.YY.ZZ_rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
		b) Force change password on first login after upgrading BMC.
	4. Please canceling preserve all configuration before upgrading this version BMC (if FW version is less v4.21.06).
	   Because of this version's BMC fixed and add lots of functions (i.e. add some ipmi lib part for Redfish using command to set preserve configuration), 
	   we suggest canceling preserve all configuration before upgrading this version BMC to avoid unexpected defect occured.
	5. Not support GPT image file when using the remote image funciotn. 
	6. please clear browser cache and cookies after finishing upgrades.
	7. Not support BMC FW downgrade with preservation.

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v4.21.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 4.21.06
Release Date: 2018.05.11

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.21_01)

[Firmware Images]:
1. s5bxv4.21.06_rom.ima with checksum          : F1F677D8
2. s5bxv4.21.06_rom.ima with MD5 checksum      : 1687ae4a5021a97a5fa202f1791a50a8
3. s5bxv4.21.06_rom.ima_enc with MD5 checksum  : 7f3c1c10103ba3d43f102468c350dd78  

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07
SKU8~9: v03

[Change/Add]: 
S5Bx:	
1. Improve Redfish performance.
2. Add RedFish upgrade function - support using Redfish to upgrade FW.
3. Add logs & reports function - System log, Audit log.
4  Add logs subscribe function - Advanced Log Settings.
5. Add Remote Control function - support HTML5 KVM.
6. Add remote image funciotn - Media Redirection.
7. Add security function - force change password on first login after upgrading BMC..
8. Yafuflash2 IPV6 allow the character "%" when using IPV6%interface.

[Bug Fixed]:
S5BH:
1. WebUI modified alert message at Firmware update page. 
2. WebUI Setting Platform Event Filters characters correct.
3. WebUI User Management Configuration page Help info add password length maximum value
4. WebUI Firmware Update page adds FW failed alert message when using different signimage key's FW to upgrade.

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select s5bxvXX.YY.ZZ_rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
		b) Force change password on first login after upgrading BMC.
	4. Suggest canceling preserve all configuration before upgrading this version BMC (4.21.06).
	   Because of this version's BMC fixed and add lots of functions (i.e. add some ipmi lib part for Redfish using command to set preserve configuration), 
	   we suggest canceling preserve all configuration before upgrading this version BMC to avoid unexpected defect occured.
	5. Not support GPT image file when using the remote image funciotn. 
	6. please clear browser cache and cookies after finishing upgrades.
	7. Not support BMC FW downgrade with preservation.
	
==========================================================================
        S5B serials AST2500(A2) BMC FW Release note (v3.75.06 ~ v4.21.06)
==========================================================================
Version: v3.75.06 ~ v4.21.06
Release Date: N/A

AMI Subversion Revision: AMI SPX RR11.5

[Change/Add]: 
1. [Add] Redfish user privilege.
2. [Add] FRU reading event.
3. [Change] Change PSU event.
4. [Change] Removed SMI support.
5. [Change] The time for IP source changed.
6. [Change] Virtual Media performance.
7. [Add] Fan will full speed when SKU error.
8. [Change] Remove “prevent PSU power on”
9. [Add] The expired date of certificate cannot less than 1 year.
10.[Add] Not support BMC FW downgrade with preservation.
11.[Change] Change minimum password length.
12.[Change] BMC ready time to 150 seconds.
13.[Change] Update Privilege “Clear SEL”

[Bug Fixed]:
1. Fixed SNMP community.
2. Fixed RKVM features.

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.75.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.75.06
Release Date: 2018.02.02

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.17)

[Firmware Images]:
1. s5bxv3.75.06_rom.ima with checksum          : FF98AA6E
2. s5bxv3.75.06_rom.ima with MD5 checksum      : F65F1DC4B79B8B57BAB4632559A73759
3. s5bxv3.75.06_rom.ima_enc with MD5 checksum  : 8453749151ADD65F1DFF0096DEB83563

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07
SKU8~9: v03

[Change/Add]: 
S5Bx:	
1. Add two SKUs for S5BM.
2. Update Rpu/Rpd value to 0x1e6e0240.
3. Add DDNS feature.
4. Add firewall quanta OEM cmd for port blocking.
5. Add disable random power on feature for customer Salesforce.
6. Add S5BT MB FRU ID.
7. Add S5BM platform.S patch.
8. Disable SMI feature.

S5BH:
1. Disable SMI feature.

[Bug Fixed]:
S5BH:
1. [226304] Fix OEM command for EFI firmware version doesn't work

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select s5bxvXX.YY.ZZ_rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.74.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.74.06
Release Date: 2018.01.17

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.17)

[Firmware Images]:
1. s5bxv3.74.06_rom.ima with checksum          : FFBADCDF
2. s5bxv3.74.06_rom.ima with MD5 checksum      : 13CF8E5C70E6785037F8C4CFCEF6B94D
3. s5bxv3.74.06_rom.ima_enc with MD5 checksum  : CF1FD9D0CB6E6D1812C0987D9E4EBB2B

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. add QuantaGetEFIVer function
2. Change WebUI title from "HDS" to "Hitachi Vantara"


[Bug Fixed]:
S5Bx:
1. Fix WebUI can't show the picture of "Processing"

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.67.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.67.06
Release Date: 2017.11.30

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 00CCFB4B
2. rom.ima with MD5 checksum      : 0E25BEE7FD01ACF58A06B27F5B004017
3. rom.ima_enc with MD5 checksum  : D962A784D2E36B3B659D3830A0F90728

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Update BMC FW version 3.67.00

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.48.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.48.06
Release Date: 2017.09.28

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 177A13E8
2. rom.ima with MD5 checksum      : 52D16FDB79096F4D3F7AFA0A0E81127F
3. rom.ima_enc with MD5 checksum  : A0AD34ACA0BB42E2DBD549DF2BC1A251

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Add Redfish command for cpu cache size

2. Add Redfish command for Fiber channel HBAs "WorldWidePortName"

3. Add Redfish command for Fiber channel HBAs "WorldWideNodeName"

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.47.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.47.06
Release Date: 2017.09.19

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 17789A81
2. rom.ima with MD5 checksum      : 0F398194D8A094822568651A7E9B96B0
3. rom.ima_enc with MD5 checksum  : 904B7C38C2ABB83EF4A6435FD408F55C

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Add Redfish command for NIC device information.
2. Solve SEL record issues.

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.46.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.46.06
Release Date: 2017.09.15

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 178D0928
2. rom.ima with MD5 checksum      : 1117DA61FA369A1BB5F7F5558978B20C
3. rom.ima_enc with MD5 checksum  : E71316468D6B5C5FF9BFA14C0AF4E625

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Support for customer feature with OEM commands

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	2. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	3. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
	4. This version doesn't fully support feature that needs SMBIOS.
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.16.06 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.16.06
Release Date: 2017.09.01

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1F91BDA7
2. rom.ima with MD5 checksum      : 6BE9937E23B6272457D8D0173CBD4752
3. rom.ima_enc with MD5 checksum  : 1AD0B51E07DF19A7CCA8D6C0B8B9591D

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Change the login logo for Customer

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin 
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.20.00 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.20.00 
Release Date: 2017.6.20

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1FF7FFAC
2. rom.ima with MD5 checksum      : 823783F36517AC0EF894FF9D228ACC7D
3. rom.ima_enc with MD5 checksum  : 25FC7B705282AA25494AEA39696800D0

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. modify the platform.S to tune ddr part.

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin 
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.17.00 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.17.00 
Release Date: 2017.6.14

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1FF81E4E
2. rom.ima with MD5 checksum      : 14C3EED5D8E5E6E21E50B75069E92C56
3. rom.ima_enc with MD5 checksum  : 5ADAD3CA2E1E505358284EF354A98F45

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. remove the sensor T_SSD_Highest for sku3 & 6 & 7.
2. restart lighttpd when it stop.
3. support NVMe SSD temp reading according to the NVMe SSD SPEC.

[Bug Fixed]:
S5Bx:
na

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.16.00 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.16.00 
Release Date: 2017.6.8

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1FFE6712
2. rom.ima with MD5 checksum      : C9F9D104B24DC6352FB1F364FA559E76
3. rom.ima_enc with MD5 checksum  : EA4401359113990649735BC76762043D

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Add patch for MAC before uncompress kernel to avoid hang at AC cycle
2. [203270] - Add reset watchdog as 600 seconds before writing BMC image to flash.
3. Not to enable USB power saving mode at BIOS POST end since BIOS will do it after USB init complete.

[Bug Fixed]:
S5Bx:
203270 - BMC will crash after flash FW from 3.12 to 3.13 via WebUI with cross different network segment. If want to back to normal, must re-programming BMC FW by fixture. (Similar issue 200248)

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.15.00 (Only for S5Bx/S5Sx)
==========================================================================
Version: 3.15.00 
Release Date: 2017.6.3

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1FF830DA
2. rom.ima with MD5 checksum      : 7866E675589C06D4B7E6A96F5A5193D6
3. rom.ima_enc with MD5 checksum  : E17F56469E79803718153ABC2DF0567F

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. To BIOS preserve function only Redfish, remove old method.
2. Modify the script in BMC release package for preserve BIOS settings.


[Bug Fixed]:
S5Bx:

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.14.00
==========================================================================
Version: 3.14.00
Release Date: 2017.6.2

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1FF5B062
2. rom.ima with MD5 checksum      : 30D12CCB0BEE82D658372AE9007C62CF
3. rom.ima_enc with MD5 checksum  : 40E00D946D7D7C5AD741A3FFB7E0560C

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. Modify the cal HDD qty method for fsc. don't cal the rear hdd.
2. Modify the uct/unct of Temp_SAS_Mezz to 115/114.
3. [202280]if the temp is less than the degree in fan table only for temp_Inlet. 
then the duty will assign to the min duty in fan table.
4. fix the VMD issue.
5. [197734] Modify the zone qty when me get fan spped for s5b/s5bq to fix the PTAS issue. 
6. [202642] Modify the sensor name to "BMC FW Info#0x79" for PSU power diff.
7. Modify the bmc watchdog timeout to 30s at runtime.
8. add count when write the system mac to eeprom.

[Bug Fixed]:
S5Bx:
202642 BMC ''Power difference watt'' event #1. Check SEL by IPMI cmd, event shall show readable sensor type and sensor name. #2. Sensor name is ''BMC FW Info'', not ''BMC FW Health''.
202280 [S5BQ_3224] System record ''CPU clock throttled'' during the ''stressapp + iperf'' test.(Separate from 201315.)
197734 Thermal PATS report not ready lead to we cannot compare the value with IPMI Zone Fan Speed readings command.


[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.13.00
==========================================================================
Version: 3.13.00
Release Date: 2017.5.24

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 1FF6EFC0
2. rom.ima with MD5 checksum      : D8C3C295873930700060D98EE550E18A
3. rom.ima_enc with MD5 checksum  : F09011E5558B3960BC77E37C39E20AC7

[Fan Table]
Version:
S5Bx:
SKU0~2: v12
SKU3~4: v07
SKU5~7: v07

[Change/Add]: 
S5Bx:	
1. [201509]Change to monitor to the NVMe SSD4/5/6/7 for S5B Hybird.
2. Modify the HDD monitor algo.
3. [201547]Igonre the HDD event IFA. (By Matt).
4. [201686] Remove the sensor ''Temp_Riser2 '' and ''Power_Riser2'' for all S5B sku.
5. Modify the sensor type to 0x28 for event "SENSOR_NUM_BMC_FW_HEALTH".
6. Add code to set c value.
7. update Fan table.
8. Modify the HDD/ Card weight.

[Bug Fixed]:
S5Bx:
201509 - BMC v3.11 SDR #1. S5B doesn't have rear HDD, but SDR has two rear HDD sensors. #2. Hybrid SKU NVMe SSD located in HDD4-7, but SDR shows ''Temp_NVMeSSD_0-3''. (Passed before)
201547 - [S5B_PVT_H2_1_1]SEL recorded | Drive Slot HDD7 | In Failed Array | at 256 loop when system setup with Warm boot cycles under windows 2016.(Passed before)
201686 - S5B Riser 2 is only for NVMe cable, it is better not to show sensor ''Temp_Riser2 '' and ''Power_Riser2'' in SDR list. (now shows ''no reading'') 

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.12.00
==========================================================================
Version: 3.12.00
Release Date: 2017.5.12

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 25461569
2. rom.ima with MD5 checksum      : 88103F4FAD912D8B3440CBF5BD471BDA
3. rom.ima_enc with MD5 checksum  : BB5AEBAC391D2DCEB13FD375EFD39574

[Fan Table]
Version:
S5Bx:
SKU0~2: v11
SKU3~4: v05
SKU5~7: v05

[Change/Add]: 
S5Bx:	
1. Add code to block the HDD event.(MG9094_REG_ICA,MG9094_REG_FAIL)
2. modify the wait time after cold/warm boot for HDD monitor. HDD monitor- ~35S 
3. [196611] Add the wait condition after cold/warm boot for ME monitor. ME monitor- 75S
4. [197892] Filter ME event.(evt1-3:0xa0 0x0d 0x01)
5. Disable SMI function.
6. After warm/cold boot, add delay time to hdd monitor.
7. Filter TEMP_SSDx_REAR sensor for S5B.
8. Disable raid management feature.
9. Update S5Bx SKU0~SKU2 fan table.
10. change the gpio_ab1 to input.

[Bug Fixed]:
S5Bx:
197892 - [S5BQ-DVT2][Yafuflash2_v4.16.13] System record abnormal SEL event after OOB update BIOS via Yafuflash2. (Firmware Status - PECI over DMI Interface Error|Image Execution Failed|Firmware Exception)
196611 - [S5B_Hybrid] SEL recorded CPU Temperature log when reboot/AC/DC with W2016 during the cycle.

[Known issue]: 
na

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.11.00
==========================================================================
Version: 3.11.00
Release Date: 2017.4.28

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 22B518F3
2. rom.ima with MD5 checksum      : 0400A1EC3305F69BC5A5AAD4FBDC0E76
3. rom.ima_enc with MD5 checksum  : DD7D017DB8AFB0018EDF2F7E59BB20B5

[Fan Table]
Version:
S5Bx:
SKU0~2: v04
SKU3~4: v05
SKU5~7: v05

[Change/Add]: 
S5Bx:	
1. Modify the m value to 2 for Power_CPU.
2. Not include the rear ssd temp into higest ssd temp.
3. Modify the me event filter for "CPU Thermal Status" sensor -- 1- PROCHOT
4. Modify the wait time for ME ready.
5. Modify the sdr to match code for sensor "NM Status".
6. Remove SAS HBA Controller support.

[Bug Fixed]:
S5Bx:
191757 - Update ME under RHEL 7.3, #1. BMC ipmi SEL lacks sensor name #2. WebUI SEL mismatch with QCI eventlog table definition #3. BMC FW spec v0.12 has no definition about this event.


[Known issue]: 
1.	RKVM JViewer cannot be launched  by Java8 Update 131

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.10.00
==========================================================================
Version: 3.10.00
Release Date: 2017.4.26

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 24B27FC4
2. rom.ima with MD5 checksum      : D2BF4D9FBD7DDF34D843517C73DD0302
3. rom.ima_enc with MD5 checksum  : B32A46D5917DFFB487772E46632D7CA2

[Fan Table]
Version:
S5Bx:
SKU0~2: v04
SKU3~4: v05
SKU5~7: v05

[Change/Add]: 
S5Bx:	
1. update worst card list R09.
2. [198760]update S5B fan table.
3. [191849]don't clear the "AC ON" flag before read it.(fix the "power policy" issue.
4. [196611][194046]polling ME after BIOS post end.
5. [200611]Modify the IIO string.
6. Modify the NCSI switch function.
7. add wait time and BIOS POST end as condition to read raid lib when raid lib is ready.

[Bug Fixed]:
S5Bx:
198760 - [Tiered SKU] BMC SDR sensor reading shows abnormally, #1. HDD sensor status is ''Not Readable'' #2. All riser related sensors show the same sensor reading #3.Fan zone 0 keep in 16000-18000 rpm.
200611 - [S5B] Severity is ''Unspecified'' in SEL after IIO error injected and event description also display ''undefined event''.
191849 - [S5BF1_1] Setup the ''Restore on AC Power Loss'' policy to ''Power on'', system do not auto power on after restore AC. BMC v2.18 passed
196611 - [S5B_Hybrid] SEL recorded CPU Temperature log when reboot/AC/DC with W2016 during the cycle.
194046 - SEL get CPU0/1 Thermal Sta after unplug single power cable frome PSU side

[Known issue]: 
1.	RKVM JViewer cannot be launched  by Java8 Update 131
2.	NIC selection only can switch Dedicated and Shard NIC(PHY), not support Shard NIC(OCP) \84\B2 auto ncsi lan switch not ready.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.09.00
==========================================================================
Version: 3.09.00
Release Date: 2017.4.20

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 227B9BB2
2. rom.ima with MD5 checksum      : 6E3C8A88F32DC13686D02C9195FC8985
3. rom.ima_enc with MD5 checksum  : E2F2928EDB8EFB1B27EB4A5E38BE597D

[Fan Table]
Version:
S5Bx:
SKU0~2: v04
SKU3~4: v05
SKU5~7: v05

[Change/Add]: 
S5Bx:	
1. [200611][199861]Change the severity.
2. Modify the polling algo to get once from RAID card after POST END.
3. Due to PCA9554 POR fail, BMC will init it after DC ON. 
4. [200337][200174]Modify the retry algo. for all sensor on the Riser.
5. Add delay time(80s) to wait raid lib ready.

[Bug Fixed]:
S5Bx:
200611 - [S5B] Severity is ''Unspecified'' in SEL after IIO error injected and event description also display ''undefined event''.
199861 - [S5B] Severity of Memory Parity Error not consistent with QCI_SPX_EventLogTable_v4_06 defined.
200337 - [S5B_H1_1_1] During AC cycle test(on cycle 95/175/436), BMC sensor "Temp_SAS_Mezz" have value but system did not install the device.
200174 - [3224] Some sensor reading value mismatch whit golden file during the Reboot/AC cycle test.(Temp_SAS_Mezz/Temp_Riser4/Power_Riser4)

[Known issue]: 
1.	RKVM JViewer cannot be launched  by Java8 Update 131
2.	NIC selection only can switch Dedicated and Shard NIC(PHY), not support Shard NIC(OCP) \84\B2 auto ncsi lan switch not ready.


[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.08.00
==========================================================================
Version: 3.08.00
Release Date: 2017.4.17

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 22B1D397
2. rom.ima with MD5 checksum      : 3CDB3689FF354A6BA7BD96C82645A514
3. rom.ima_enc with MD5 checksum  : C7902BAFBE31AF3F7303AE85A3FE8DC3

[Fan Table]
Version:
S5Bx:
SKU0~2: v04
SKU3~4: v05
SKU5~7: v05

[Change/Add]: 
S5Bx:	
1.[188044] Change the uct & unct to 500 & 1000 for Fan_SYSx_x.
2.[198647] Change the all PSUx naming to PSU0 and PSU1 from PSU1 and PSU2.
3.[199673] Change threshold of the Temp_BP_2.5 & Temp_BP_3.5 and Temp_VR & Temp_VR_CPU0/1 & Temp_VR_CPU0/1_ABC/DEF.
4.[199952][197611] Modify the wrong retry reading for all Temp_NVMe_SSD.
5.[189048]Don't set var to 1 when don't get the correct BMC version.
6. Set circular event as default.
7. Modify the redfish code.

[Bug Fixed]:
S5Bx:
188044 - The threshold value of system fans are not match between BMC FW SPEC v007 and FSC Table R04.
198647 - Current PSU sequence naming rule doesn't follow Mechanical_Std_SPEC definition, including chassis label, MB silkscreen and BMC SDR naming. (PSU numbering should start from 0, but now starts from 1).
199673 - [S5Bx] The Sensor&Threshold value mismatch FSC SPEC define,(S5BQ_FSC Table_R04_QCT_170308), please check sensor value.
199952 - [S5B_PVT_All flash_L6] SEL revorded abnormal event about NVMe [Temp_NVMeSSD_0] [Temperature] Upper Non-Critical when VR stress 60 hours . (Passed before.)
197611 - [S5BQ/Tiered2_1] Run PTU stress found BMC log abnormal NVMe temp event.
189048 - BMC cold reset stress failed at 305 cycles due to BMC version changed to be 0.00. (Issue BMC cold reset again, BMC version can get correct 2.11 version)


[Known issue]: 
1. At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.
2. Befor version 3.05, yafuflash maybe take long time to start the updating process via In-band. 

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.07.00
==========================================================================
Version: 3.07.00
Release Date: 2017.4.13

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 22ABD731
2. rom.ima with MD5 checksum      : 8AFDFB1E44007CE9F48498854C026D30
3. rom.ima_enc with MD5 checksum  : 6BCDC4B87168DE6E04FBEFB1EC4099A7

[Fan Table]
Version:
S5Bx:
SKU0~2: v04
SKU3~4: v05
SKU5~7: v05

[Change/Add]: 
S5Bx:	
1. [199975]Add SENSOR_NUM_BROCAST,0x83,(QuantaPlatform.c)
2. Add the Temp_SSD_Highest sensor.
3. According to the hdd type from BIOS & Raid card(Riser3,3108) to change the max fan speed.
4. updated fan table ver to v05 for s5bq.
5. change the conf file size to 4MByte from 1MByte.

[Bug Fixed]:
S5Bx:
199975 - [S5B] Sensor number and severity do not correct on sensor ''BroadcastSts''.(Passed before.) 

[Known issue]: 
At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.

[Notice]:
	1. Due to BMC's conf extend to 4MB, yafuflash and webui does not support BMC upgrade from previous version.
	2. Update BMC FW via command line:
    		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
    		b) in DOS, run "dos.bat".
	   		in Window, run "win.bat"
       			in Linux, run "linux.sh"
	3. Force to update BMC FW via command line:
    		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	4. Update BMC FW via Web UI:
    		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	5. login account:
    		a) IPMI access account for WEBGUI and IPMITOOL.
       			username: admin
       			password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.05.00
==========================================================================
Version: 3.05.00
Release Date: 2017.3.30

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 23E6556F
2. rom.ima with MD5 checksum      : 6C7812C7FF66AED2F819C55B10D64377
3. rom.ima_enc with MD5 checksum  : 992E9601B2D528AA47C251DC7249B44C

[Change/Add]: 
S5Bx:	
1. Change sensor name to Temp_NVMeSSD_R_0 and Temp_NVMeSSD_R_1.
2. Modify all the virtual media instance(cd-rom/floppy/hdd) number to 1.
3. [196263][194826][194824][194823]Modify the HDD monitor algo.
4. Add lnct 5 and lct 0 for sensor Temp_Inlet.
5. Remove event "almost full event" when enable sel circular.
6. Modify the lnct and lct to 1000 and 500 for Fan_SYSx_x.
7. Enable preserve MAC function.
8. [194268] Modify the "Fan present - Deasserted" event severity to Critical.
9. [194401][194833][199640][199488][195183][199430][194888]Unckeck psme agent. 

[Bug Fixed]:
S5Bx:
196263 - The BMC SEL(v2.27) will record many HDD event(present/failure/rebuild...etc.) at WIN 2016 AC/DC cycle test loop 48 and loop 53
194826 - [S5B 1&1 ESP]The BMC SEL(v2.24) sometimes will record full HDD present deasserted/asserted when run WIN2016 AC cycle test(most time only record ''HDD 2/3 present deasserted'')(HDD 2/3 do not insert HDD)
194824 - [S5B] During AC cycle test, HDD slot driver present event did not consistent on each cycle. Sometimes only record slot 8-11, sometimes record slot 0-11.
194823 - [S5B_Hybrid] During AC cycle test, BMC will record ''HDD slot 8-11 Driver present'' event, but Hybrid system only have 8 HDD slot.
194268 - WebUI shows ''Fan present'' event severity is question mark.
194401 - [S5BQ] Run VR stress under RHEL over weekend and found BMC die.
194833 - [S5B 1&1 ESP] There are some abnormal bmc event logs after warmboot test on CentOS6.8 x64
199640 - Unable to ping BMC IP and check BMC heartbeat is off at DC cycle 27 loop.
199488 - [S5B] System record abnormal SEL log(Drive Present/Add-in Card SD Card/Power Unit Power Unit | AC lost) during DC/warm reboot test.
195183 - [DVT2_Hybrid_LBG4_PCHB1_3PCIe] The BMC will cannot be accessed and BMC heartbeat LED not light at Warm boot cycle 888 loop.
199430 - [3224_2] System record abnormal SEL log(Drive Present/Add-in Card SD Card/Power Unit Power Unit | AC lost) during the CPU stress test.(PTU)
194888 - [S5BQ] [LBG-1_Full] System occurred ''Health BMC FW Health | Management controller off-line'' and ''PCIe Error | Bus Correctable error'' and ''Add-in Card |  | Asserted'' event during warmboot cycle test.

[Known issue]: 
At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.04.00
==========================================================================
Version: 3.04.00
Release Date: 2017.3.23

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : F6A1890C
2. rom.ima with MD5 checksum      : BF3D719BA3759E09DBDFC8C0067E088B
3. rom.ima_enc with MD5 checksum  : D6E84017C274E2C8D598ABCE4BED994A

[Change/Add]: 
S5Bx:	
1. Add NVMe SSD Temp sensor at rear for sku 3 & 6 & 7. 
2. Modify the "Monitor interval" to 1 for sensor "DIMM & PSU & Inlet Temp".
3. [194355] Add fan table version shown on webui.
4. [191757]Add sensor "NM Status", sensor number:0x8f.
5. Enable Redfish function.
6. Remove SAS fru (ID:10).
7. [190782] Don't send power btn event when lock "Power OFF button".
8. Change below severity.
#[198103 ] PostError
0x00D5 to warning.
0xA104 to warning.
#[198622] Event Reading Type:0x76
"CPU Critical Temperature - Asserted" to Critical
#SDR Type C0h - OEM Record
To Information.

[Bug Fixed]:
S5Bx:	
198103 - WebUI ''No space for Legacy Option ROM'' event severity is ''Information'', but QCI Eventlog table v4.03 defines ''Warning''.
194355 - According to BMC std spec v2.22 that WebUI shows fan table version for CMC FW, but S5B doesn't support CMC still can see ''Fan Table Version'' item in WebUI.
198622 - [S5B] According to spec ''QCI_SPX_EventLogTable'' defined the Severity of \A1\A7CPU Critical Temperature asserted\A1\A8 is be \A1\A7Critical'' not ''Warning''.
190782 - BMC SEL did not record Reset button pressed event when Set lock Reset button of the front panel command and Pressed reset button. (same as #180231)
191757 - Update ME under RHEL 7.3, #1. BMC ipmi SEL lacks sensor name #2. WebUI SEL mismatch with QCI eventlog table definition #3. BMC FW spec v0.12 has no definition about this event.

[Known issue]: 
At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.02.00
==========================================================================
Version: 3.02.00
Release Date: 2017.3.16

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 3250042D
2. rom.ima with MD5 checksum      : FE9DE186D7107B3AA1A467744293F5AB
3. rom.ima_enc with MD5 checksum  : 0B2F24D8C102385D1DF644716DD03882

[Change/Add]: 
S5Bx:	
1. disable Redfish.
2. don't speed up fan to full when sensor don't present.
3. change the Generator ID for log me event.

[Bug Fixed]:
S5Bx:	

[Known issue]: 
At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.01.00
==========================================================================
Version: 3.01.00
Release Date: 2017.3.14

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : F46F85DA
2. rom.ima with MD5 checksum      : 78F4D40B37CB359AF5F6C5CF9CCD5585
3. rom.ima_enc with MD5 checksum  : B27EDEA9B22A748D147EDD2368F84FD7

[Change/Add]: 
S5Bx:	
1. Support Redfish.

[Bug Fixed]:
S5Bx:	

[Known issue]: 
At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v3.00.00
==========================================================================
Version: 3.00.00
Release Date: 2017.3.9

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 3270DBB9
2. rom.ima with MD5 checksum      : 730CCB699E75D3DCDD751BBAFC0C595B
3. rom.ima_enc with MD5 checksum  : 114C492125269CCA471288DB6A43B311

[Change/Add]: 
S5Bx:	
1. [187866] Add the inventory function.
2. [191271] Remove the unnecessary BP temp for all sku.
3. [194011] Change sensor num as below. CPU0 to 0xA9, CPU1 to 0xAC, HDD2 to 0xB3... HDD11 to 0xBC.
4. [189051][194268][194273][197008] Modify the sel severity.
5. [194297]modify the lct to 5 for Temp_Inlet.
6. [187900] Disable 'dumped kernel messages'.
7. Remove sensor "Temp_OCP_Mezz_In".
8. Change the hdd/PCIe weight and sensor num/name for S5BQ.
9. Add CPU offset for PID.
10. Remove sensor "System Event" sen#0x72.
11. change dimm related sensor name.
12. Enable BMC watchdog.
13. WebUI support HBA card in riser4.
14. RAID managment only supports riser 3 type 1 slot 1 and riser 3 type 2.
15. Change the lct to 2.520 and uct to 3.591 for sensor Volt_P3V_BAT.
16. Change the "HDD present - Deasserted" as default status.

[Bug Fixed]:
S5Bx:	
194297 - MRD v2.19 defines lowest operational temperature is 5 degree C, but BMC sensor ''Temp_Inlet'' LCT threshold is 12 degree C, the temperature difference is large.
187866 - [RR11.5/WebUI] Unable to detect the DIMM_A0 under BMC WebUI System Inventory page.
191271 - All Flash/Tiered SKU only use? 2.5" BP but SDR still has sensor "Temp_BP_3.5" that shows "no reading".
194011 - In WebUI "Sensor" page, some HDD/CPU sequence are reversed.
189051 - After install RHEL 7.3 OS, BMC SEL in WebUI shows OS boot event severity is unknown and sensor name ''#0x0''.
194268 - WebUI shows ''Fan present'' event severity is question mark.
194273 - QCI Eventlog table v2.21 ''Fan Present'' event #1. Lacks? ''Fan Present - Asserted'' definition #2. ''Fan Present'' event description not match with WebUI shows.
197008 - WebUI "BMC hardware watchdog timeout reset" event severity and description doesn't match with QCI Eventlog table v4.03.
187900 - [T2_1/H1_1 /F2_3]  Front Panel ID LED blinking frequency is not consistent

[Known issue]: 
At BMC FW v 2.26, Update BIOS via WebUI and during BIOS bin file uploading, the progress bar would roll back from 99% and start uploading again until 100%. and updating maybe fail.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.31.00
==========================================================================
Version: 2.31.00
Release Date: 2017.2.24

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 3288D363
2. rom.ima with MD5 checksum      : D0A898F9F9E48FAA73B486C1B1DCCA71
3. rom.ima_enc with MD5 checksum  : 1F0737A092E45F31FBAE4F9CF6236993

[Change/Add]: 
S5Bx:	
1. add code to support complete BASIC FSC(PID).

[Bug Fixed]:
S5Bx:	

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.30.00
==========================================================================
Version: 2.30.00
Release Date: 2017.2.21

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 3286950D
2. rom.ima with MD5 checksum      : 9CCCCB0BC93737BF0C5F7F1A1CA6451D
3. rom.ima_enc with MD5 checksum  : DE7DF30F1765F02A6B31675ECFBDC384

[Change/Add]: 
S5Bx:	
1. [196605] Fix BMC reset issue.

[Bug Fixed]:
S5Bx:	
[196605] [S5B] Cannot reset BMC by IPMI command on BMC v2.29. (v2.28 passed).

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.29.00
==========================================================================
Version: 2.29.00
Release Date: 2017.2.20

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 32866EDD
2. rom.ima with MD5 checksum      : 3F570F71E6B41EC02C57B88FA2820A93
3. rom.ima_enc with MD5 checksum  : BCDB47D5C8D31774B66157D4FDCF0B2A

[Change/Add]: 
S5Bx:	
1. fix fan table loading issue when all sku.
2. Mark code for command QuantaSetPCIECardInfo to avoid bmc hang.
3. "ipmi cold reset" command would be rejected when doing bmc/bios update.

[Bug Fixed]:
S5Bx:	

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.28.00
==========================================================================
Version: 2.28.00
Release Date: 2017.2.16

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 05ADBD27
2. rom.ima with MD5 checksum      : 548FDE2F334DA90EAB504732C4C6043A
3. rom.ima_enc with MD5 checksum  : 12E399DCC894478AEEF5ED55CCDDEF37

[Change/Add]: 
S5Bx:	
1. Add fan table support for all sku.
2. Disable redfish.
3. Add NVMe SSD LED control.
4. Fix HDD monitor issue for sku of 12 pcs HDD.
5. Modify the Temp and fan sensor threshold for S5BQ.

[Bug Fixed]:
S5Bx:	

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.27.00
==========================================================================
Version: 2.27.00
Release Date: 2017.2.9

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 35093BB0
2. rom.ima with MD5 checksum      : 6AE868F2D78F4494C10E5245A4E99BA7
3. rom.ima_enc with MD5 checksum  : 03322CF491C472FBBE81158E388ACF34

[Change/Add]: 
S5Bx:	
1. Fix sensor Power_CPU and Power_Memory issue.
2. Remove the unnecessarily sensor by sku.
3. Add code to read NVMe SSD Temp.
4. Fix bmc hung issue when dc cycle.
5. Add event data 2/3 in psu status to identify OTP, OVP, OCP and fan fault.
6. RAID managment only supports solt 1 in type 1 riser and slot 1 in type 2 riser.
7. Disable redfish.

[Bug Fixed]:
S5Bx:	

[Known issue]: 
1. Don't support HDD status monitor for sku0/1/2/3.

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.25.00
==========================================================================
Version: 2.25.00
Release Date: 2017.1.26

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 37DAEF9B
2. rom.ima with MD5 checksum      : 16CD0C35B798F3A707C413BFE2CFAA18
3. rom.ima_enc with MD5 checksum  : 34277D0B95F93A82F99CC74D9B71135B

[Change/Add]: 
S5Bx:	
1. HDD sensor status default to present.
2. Support SAS/STAT HDD status for all sku.
3. Add S5BQ Fan table.
4. Disable redfish.

[Bug Fixed]:
S5Bx:	

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.24.00
==========================================================================
Version: 2.24.00
Release Date: 2017.1.20

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 380F6672
2. rom.ima with MD5 checksum      : 485C1D93B7C1BEC426E6BC9AD3A65ED2
3. rom.ima_enc with MD5 checksum  : 09283C97A673DEAE35C35B7D9AAE3A08

[Change/Add]: 
S5Bx:	
1. Modify the slave addr of Riser4 INA219 to 0x84.
2. Add sensor#0xf8 for sd card.
3. Enable USB by default next version, SIT to verify HOST not hang (by mail)
4. Modify compcode of Set BMC Configuratio and Get BMC Configuration to 0xd5 if not support.
5. Change the sensor number for mb_thermaltrip.
6. [189217] BMC preserve MAC address before update bios.
7. [191643] Restore pid control to PID when ME self test result change to normal.
8. [188929] enable usb.
9. Disable PEF instances.
10. Disable redfish.
11. raid management: only support riser 3 type 2. 

[Bug Fixed]:
S5Bx:	
[189217] [S5B] Offline update BIOS or via BMC Web-UI update, the PHY board MAC address will be removed. Suggest BMC have put the solution from Web-UI update BIOS if any emergency occur during BIOS boot up.
[191643] The Fan speed do not return normal status when reboot SUT after flash BIOS 2A08 under WIN2016(DC on/off SUT will make Fan speed return normal status)
[188929] [H5_1] System is easy to be hung up at 0xB4 after AC/DC/reboot (Similar 187061)

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.23.00
==========================================================================
Version: 2.23.00
Release Date: 2017.1.12

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 2CB84565
2. rom.ima with MD5 checksum      : C4F9F2F6D7A221ECC5FD7471D2818BF7
3. rom.ima_enc with MD5 checksum  : 404480A2CE66A4EB397C282AE50213BD

[Change/Add]: 
S5Bx:	
1. Modify "Sensor Maximum" and "Sensor Minimum" of Temp_Riser3 to 0x7f and 0xc5.
2. Add "power on delay" of Riser temp sensor.
3. [188046][190289] Modify the default present status for sensor HDD,FAN,PSU,PSU Redundancy,etc. 
4. [191965] Add sensor Temp_Riser2#0x6B and Power_Riser2#0xe8.
5. [191947] Add below function to S5BQ.
	a. filter cpu0/1 thermal status.
	b. HDD status monitor.
	c. send event when psu power difference.
	d. psu cold redundant.
6. [190976] Update OEM command \A1\A7SET PCIE INFORMATION\A1\A8 request Byte.
7. [190913] Add support HDD status on SNMP.
8. [190843] sensor "PSU Redundancy" will show Fully Redundant only when both PSU status equal 0x01.
9. [191847] Modify the sensor "Assertion/Deassertion mask and settable readable threshold to show LCT threshold.
10. [191957] modify the sensor initialization and capabilities to show sensor reading.
11. uncheck "Runtime Feature Licensing Suppport".

[Bug Fixed]:
S5Bx:	
[188046] [F2_3] The BMC didn't record the ''Fan_SYSx_Status | Device Present | Asserted'' after plug the system fan.
[190289] SEL should not log ''Power Supply PSU Redundancy | Fully Redundant | Asserted'' when BMC cold reset.
[191965] [S5BQ] BMC lack Riser 2 Temp & Power sensor.
[191947] [3224_1_1 LBG-1]SEL sensor got HDD 0 ''na'' incorrectly 
[190976] OEM ''Get PCIE Information'' response all 0 when SUT installed with two LSI9300-8e storage cards, one X550-T2 lan card and one OCP 82599ES mezz 
[190913] Failed to get SNMP ''hddDeviceInfoTable'' information and it would pop-out error message ''Request failed or timed out. No error''. card.
[190843] Trigger PSU OT to make one PSU failure and input 0 watts, but PSU Redundancy still shows ''Fully Redundant''.
[191847] According to BMC std spec v2.20 that inlet temperature sensor should have LCT threshold, but now S5B doesn't have.
[191957] [S5BQ] BMC 2.22 found ''BMC_CPU_Util '' & ''BMC_Mem_Util '' show as disable. Please check it.

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500(A2) BMC FW Release v2.22.00
==========================================================================
Version: 2.22.00
Release Date: 2017.1.6

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 2CC0166D
2. rom.ima with MD5 checksum      : 0E84EB6791A8FF0E336132B98108B841
3. rom.ima_enc with MD5 checksum  : 7F41BD30F683FDC3B7FEFCE954273129

[Change/Add]: 
S5Bx:	
1. Modify BIOS sensors.
2. Change the SENSOR_NUMBER_AMBIENT_1 at code to 0x76 for mb_thermal_trip.
3. [191786] Change the description of BMC Chipset version to AST2500(A2) at file ReleaseNote.txt.
4. [191090] Set  Volt_PVCCIO_CPU1 to uct:1.057V and lct:0.882V. 
5. [191849][191809] Fix ipmi cmd "power on" issue.
6. [190084] Change the sen# HDD2 to 0xbc and CPU0 to 0xac
7. [191847] Add lct 0x0c for Temp_Inlet.
8. [191691] Modify BMC OEM command 0x3A(Get Asset ID) to match OEM SPEC v2.3.
9. [191852] Modify the debounce for below GPIOs.
	GPIO_ID_BTN_N,GPIO_FP_RST_BTN_N,GPIO_FP_PWR_BTN_N,GPIO_FP_NMI_BTN_N
10. Modify the sdr setting for sensor BMC_CPU_Util and BMC_Mem_Util.

[Bug Fixed]:
S5Bx:	
[191090][S5BQ] System occurred ''Voltage Volt_PVCCIO_CPU1 | Lower Critical going low '' during PTU stress test.
[191786] WebUI BMC Chipset version was mismatch with release note. (WebUI:AST2500(A2), release note:AST2500).
[191809] SUT has no response to ipmi chassis power command and WebUI power action.
[190084] The Severity is ''Information'' for event ''[HDD2] [Drive Slot] Drive Fault - Asserted'', it should be ''Critical''. (HDD3~HDD11 are Passed.)
[191847] According to BMC std spec v2.20 that inlet temperature sensor should have LCT threshold, but now S5B doesn't have.
[191849] [S5BF1_1] Setup the ''Restore on AC Power Loss'' policy to ''Power on'', system do not auto power on after restore AC. BMC v2.18 passed[]
[191691] The BMC OEM command 0x3A(Get Asset ID) feedback data do not match OEM SPEC v2.3 define(SPEC define feedback data should be BMC MAC, but actual feedback data are all ''ff'')
[191852]  Sometime UID LED always blinking after turn ON to OFF  by press UID button repeat several time

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B serials AST2500 BMC FW Release v2.20.00
==========================================================================
Version: 2.20.00
Release Date: 2016.12.29

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. Yafuflash2 (version 4.16.13)

[Firmware Images]:
1. rom.ima with checksum          : 382C7009
2. rom.ima with MD5 checksum      : 52C7BC006562D899EF7679108CF61E35
3. rom.ima_enc with MD5 checksum  : DD418C98C57EE22083D989C6BBD877E4 

[Change/Add]: 
(S5B/S5BQ):
1.[188689] Upgrade the uboot verison to v14.
2.[189719][188747][187539] Add condition to filter ME event.(CPU0/1 Thermal Sta)
3.[191195] Disable SD Server. Host/OS can't access it.
4.[189418][191090][190356] Add Aspeed ADC solution. the same as RR2 soultion.
5.[190964] Support ONE PSU or TWO PSU config. BMC will scan and change the config once AC on.
6.[181774] Support PSU cold Redundancy by OEM command (0x36/0x1c).
7.[191318][191419] Change below voltage sensors monitor policy.
Volt_P3V_BAT, Volt_PVNN_PCH, Volt_P1V8_PCH, Volt_P12V_AUX, Volt_P1V05_PCH.
8.[190771] BMC has increased the judgment during get sensor reading.
9.[190899] BMC has increased sensor name and sensor type on 'oem Record cx' event.
10.[188227] Modify the format of Memory ECC Error log in the SMTP server
11.[190754] Chagne sensor states from ''All deasserted'' to ''All Deasserted'
12.[188762] Modify the counting method under MibBrowser.


[Bug Fixed]:
S5B/S5BQ:	
[188689] BMC hang up during hot and cold operational test
[191318] Some voltage sensors belong to standby sensors, their reading shall be available when system is DC off. (according to BMC std spec v2.20 sec.5.1.1)
[191419] [S5BQ]Some voltage sensors belong to standby sensors, their reading shall be available when system is DC off. (according to BMC std spec v2.20 sec.5.1.1)
[189418] [H5_1][B1 PCH] SEL recorded abnormal event ''[Volt_P1V8_PCH] [Voltage] Lower Critical - Going Low'' after idle under RHEL 7.3.
[191090] [S5BQ] System occurred ''Voltage Volt_PVCCIO_CPU1 | Lower Critical going low '' during PTU stress test.
[190356] [3224_2] System recode Voltage PVCCIO_CPU1/P3V_BAT critical log after power on the SUT
[190964] [S5B] For two PSU SKU. Plug out one PSU power cord, BMC SEL did not record ''Power Supply PSU Redundancy | Redundancy Lost'' event.
[181774] Cold redundancy no function\
[190771] All fans status are ok, but SNMP fanStatusOverall shows "other".
[190899] WebUI login event in SNMP "selDeviceInfoLogTable" shows incorrectly. (sensor name is empty, sensor type is "Temperature")
[188227] For Memory ECC Error log, description in PEF Mail is not consistent with SNMP Trap and WebUI.
[190754] WebUI discrete sensor states shall change from ''All deasserted'' to ''All Deasserted'' to match other sensors format.
[188762] [RR11.5/SNMP] The FRU data was incomplete and missing lot of feilds under MibBrowser. 

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		Refer to readme.txt
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B/S5BQ AST2500 BMC FW Release v2.18.00
==========================================================================
Version: 2.18.00
Release Date: 2016.12.12

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 388134F0
2. rom.ima with MD5 checksum      : 2BA67009F9967514ECE804519A191751
3. rom.ima_enc with MD5 checksum  : A3DAADE1CFA950C743C64439A3D54A91

[Change/Add]: 
(S5B/S5BQ):
	1.Update voltage threshold
	2.disable PSU event
	3.disable PEF control

[Bug Fixed]:
S5B/S5BQ:	

	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B/S5BQ AST2500 BMC FW Release v2.17.00
==========================================================================
Version: 2.17.00
Release Date: 2016.12.8

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 388452F8
2. rom.ima with MD5 checksum      : 60F33889E45E11B4569CDA235D21695D
3. rom.ima_enc with MD5 checksum  : DF0D63718D8695A429A5FF92A68AE375

[Change/Add]: 
(S5B/S5BQ):

[Bug Fixed]:
S5B/S5BQ:	
	[189323] Sensor ''CPU_Utilization'' and ''Mem_Utilization'' reading are inaccurate, not match with OS reported CPU/memory loading.
	[189320] WebUI shows ''CPU_Utilization'' and ''Mem_Utilization'' sensor type are ''Reserved'', and BMC spec v0.08 section 5 doesn't define these two sensors for detailed info.
	[189402] WebUI login fail event severity and description different with QCI_SPX_EventLogTable_v2_18 definition. (other login events description are also different with standard)
	[189575] Disable BMC IPv6 support in BIOS setup, found WebUI shows BMC IPv6 status is ''Static''.
	[188227] For Memory ECC Error log, description in PEF Mail is not consistent with SNMP Trap and WebUI.
	[188494] [RR11.5/SMASH] The PSU Redundancy status is not correct when system DC OFF. (Same issue as S2B #184420)
	[188241] Mail server cannot receive mail for event ''OEM Record cX''.
	[188233] SEL would not record event ''PEF Action - Asserted'' when trigger event with PEF Mail Enabled. (Have received mail in mail server.)
	
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B/S5BQ AST2500 BMC FW Release v2.16.00
==========================================================================
Version: 2.16.00
Release Date: 2016.11.29

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 3B49C384
2. rom.ima with MD5 checksum      : 0356EBF52B6713BC2AD5FF64AE6C74BD
3. rom.ima_enc with MD5 checksum  : 7E727E779475121DEF9EFAAA2EFED792

[Change/Add]: 
(S5B/S5BQ):
	(1) support BMC 64M Flash (MX25L51245GMI-08G)
	(2) disable Redfish
[Bug Fixed]:
S5B/S5BQ:	
	[188740] The Description is showed ''undefined'' for events ''[Power Supply] Predictive Failure'' and ''[Power Supply] Power Supply Failure Detected''.
	[188966] [F2_1]SEL recorded abnormal ''undefined BIOS event'' when inject DIMM configuration problem on DIMM J/K/L/M
	[189215] WebUI fan present event severity is unknown and QCI_SPX_EventLogTable v2.18 doesn't define this event.
	[189299] Disable ME to make Temp_PCH reading not available, found system fans duty didn't rise up to 100%.
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.15.00
==========================================================================
Version: 2.15.00
Release Date: 2016.11.24

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 318AB2E0
2. rom.ima with MD5 checksum      : F6D7D33785CBF2D7CAA24B7515F43153
3. rom.ima_enc with MD5 checksum  : E78900F2528DEC748B8B1650573A7873

[Change/Add]: 
(S5B):
	
[Bug Fixed]:
S5B:	
	[186432] [T2_1] SEL recorded a lot of Volt event during AC power cycling. ''[Volt_DIMM_ABC]'', ''[Volt_DIMM_KLM]'', ''[Volt_PVCCIO_CPU0]'', ''[Volt_PVCCIO_CPU1]'', ''[Volt_P3V_BAT]'', ''[Volt_PVNN_PCH]''
	[186732] [T2_1] SEL recorded abnormal SPS FW Health events  ''UMA Operation Error - Asserted'' and ''Auto-configuration Finish - Asserted'' at DC power cycling about 11Hrs/108 cyles
	[187395] [T2_1] SEL recorded duplicated events in some loops during BIOS + ME online flash stress.
	[187621] [BMC RR11.5] As discussed in BMC FG meeting, (1)pls provide the SDR table for S5B (like the definition for AMA), (2)pls define to Std_SPEC.
	[187432] For ''Additional PCI Express Error Events Log'', the Sensor Name and Sensor Number havn't been defined to BMC SPEC and Event Table 2.15.
	[188250] [RR11.5/WebUI] It's hard to distinguish the grayed-out info on WebUI Power Control page.
	[188490] [RR11.5/SMASH] (1) Please update the SMASH definition for RR11.x code base. (2) There is no ''Note 2'' for LOM/OCP Mezz/Quanta Mezz.
	[188739] [F1_1, H1_1] BMC WebUI got timeout disconnect under RKVM virtual CD mounted and web idle on Dashboard.
	[189215] WebUI fan present event severity is unknown and QCI_SPX_EventLogTable v2.18 doesn't define this event.
	[188747] [All flash SKU] System record abnormal log ''Processor CPU0 Thermal Sta/Processor CPU1 Thermal Sta'' during hot and cold operational test
	[188997] [S5B_H1_1] One of the S5B system, BMC sensor reading value have deviation on sensor ''Volt_DIMM_XXX''. (BMC show 1.28-1.27 Volts, but actually only 1.21-1.20 Volts)
	[189290] BMC v2.11 supports fan LNC threshold (945 rpm), but according to BMC standard spec v2.17 the value should be NA. 
	[189635] BMC SDR check fail
	[189637] Micro SD card Fail
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.13.00
==========================================================================
Version: 2.13.00
Release Date: 2016.11.18

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 375195AE
2. rom.ima with MD5 checksum      : 7EEADDEDC187B1284F9DD134165835D5
3. rom.ima_enc with MD5 checksum  : 144C476A17530213C9BC6CA64014CCA4

[Change/Add]: 
(S5B):
	[1] Add MB Thermal Trip behavior

[Bug Fixed]:
S5B:	
	[175851] BMC WEBUI can't get  PSU Predictive failure detail information. (OTP / OCP / .....)
	[186744] ''No Signal'' message showed up on BMC RKVM during system warmboot (system Power LED was steady ON).
	[186969] The naming format of PSU OT and UV failure event didn't follow the QCI_SPX_EventLogTable_v2_15.
	[187259] [RR11.5/WebUI] (1) The FRU Product Information page didn't print out the ''Product Part Number'' and ''Product Version''. (2) The IPMI tool didn't print out the ''Product Serial Number''.
	[187539] [F2_3] There are some abnormal SEL ''Processor CPU1 Thermal Sta |  | Asserted'' be recorded during AC Lost/Redundancy test.(similar to 186850)
	[187659] SEL log missing on WebUI after triggered Temp_VR_DIMM event. (e.g. log 27 then 32; 28-31 are missing).
	[187668] Unspecified/undefined event has been recorded after triggered Temp_VR_DIMM event. 
	[188210] [T4_1] DC cycle test and BMC will record #0x0/ [OS Boot] [OS Stop or Shutdown] log , sensor name shouldn't be ''[#0x0]''
	[188494] [RR11.5/SMASH] The PSU Redundancy status is not correct when system DC OFF. (Same issue as S2B #184420)
	[188738] [RR11.5/SNMP] (1) Unable to detect the DIMM A0 via MibBrowser. (2) Unable to detect all DIMMs freuency via MibBrowser.
	[188750] [RR11.5/SNMP] The manufacture and model name of processor was shown ''Unknown'' under MibBrowser.
	[188762] [RR11.5/SNMP] The FRU data was incomplete and missing lot of feilds under MibBrowser.
	[188780] [RR11.5/SNMP] The MibVersion was incorrect which be loaded under MibBrowser.
	[189051] After install RHEL 7.3 OS, BMC SEL in WebUI shows OS boot event severity is unknown and sensor name ''#0x0''.
	[189196] AC off and then AC on, SUT power on immediately once BMC heartbeat start blinking, without randomly waiting 0-10 seconds to power on.
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.11.00
==========================================================================
Version: 2.11.00
Release Date: 2016.11.05

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 376FE4BA
2. rom.ima with MD5 checksum      : 766373483BF9449FB35D79C7A86F8A18
3. rom.ima_enc with MD5 checksum  : 7E19DEED9CDAEFE8EF501D3F7423B2F6

[Change/Add]: 
(S5B):
	[1] Add PSU Cold Redundancy, but default is Cold Redundancy mode for SDA testing, v2.12.00 will set default to be Normal mode.
	[2] Add fan fail mechanism for fan control.

[Bug Fixed]:
S5B:	
	[188255] [RR11.5/WebUI] The current page will not be refreshed when press the same icon from menu bar.(Grantley passed)
	[188252] [RR11.5/WebUI] Please define in more detail about the meaning of ''Warning'' icon since it's not for SEL.
	[188250] [RR11.5/WebUI] It's hard to distinguish the grayed-out info on WebUI Power Control page.
	[188235] [RR11.5/WebUI] The WebUI will pop-out message \A1\A7Invalid Password\A1\A8 when change the SNMP access setting from ''User Management Configuration'' page.
	[188174] [RR11.5/SNMP] The default SNMP community string is incorrect under BMC FW 2.08.(doesn't meet BMC Std_SPEC 2.17)
	[188162] [BMC RR11.5] (1)Unable to get the reading from sensor ''Temp_OCP_Mezz'' and (2)sensor ''Temp_OCP_Mezz_In'' has be implemented to BMC 2.08, please define to BMC FW SPEC.
	[188044] The threshold value of Temp_PCH dose not match between BMC FW SPEC v007 and FSC Table R04.
	[188029] [RR11.5/WebUI] The BMC WebUI should not allow the user to login with privilege level ''User''.
	[188024] [RR11.5/WebUI] (1)No ''OEM Proprietary'' in drop-down menu with user privilege. (2)The level of ''None'' shall be the ''No Access''.
	[187900] [T2_1] Front Panel ID LED blinking frequency is not consistent
	[187859] [RR11.5/WebUI] The format of BMC Firmware Revision doesn't match between BIOS setup (2.08.00) and BMC WebUI (2.08.0)
	[187558] Sensor Number ''0x90'' cannot be decoded and BMC SPEC v007 doesn't have related definition.
	[187459] Sensor Name ''CPUX Thermal Sta'' doesn't be defined to Event Table 2.15
	[187457] SEL doesn't record Thermal Trip event when system is thermal trip and then auto power off.
	[187453] WebUI status is Processing and no any response while UUT Processor Hot test
	[187437] New WebUI SEL log format for PCIe Error (should report solut number) is not ready. (New definition in BIOS Standard V3.05-Draft)
	[187231] [RR11.5 WebUI] The quantity of IPMI Event Log didn't sync the current SEL quantity.
	[187218] [RR11.5/WebUI] The BMC WebUI will pop out the error message when using the Backup Configuration.
	[187152] (1)MB FRU VRC package lack FRU.bin file and (2)ReadMe info is incorrect.
	[187137] [RR11.5/Basic Fun] Failed to flash 63 digit for FRU info ''MB Serial Number'' as SPEC definition (Actual Max :44).
	[187092] One keyboard pressed, abnormally got multiple response by BMC Web RKVM.
	[186744] ''No Signal'' message showed up on BMC RKVM during system warmboot for 20 mins(system Power LED was steady ON).
	[186736] [T2_1] SEL recorded Critical event ''[Fan_SYS5_0] Lower Critical - Going Low'' and Warning event ''[Fan_SYS5_0] Lower Non-Critical'' during DC power cycling about 4 hours/40 cyles
	[186514] The sensors of ''Temp_Outlet'' and ''Airflow'' (ME function) unable to get the reading (separate from #186228).
	[186421] [T2_1] Front Panel System Status LED blinking frequency is not consistent.
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.09.00
==========================================================================
Version: 2.09.00
Release Date: 2016.10.22

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 37851701
2. rom.ima with MD5 checksum      : 5351009B6DE3C769C0D41086C060836B
3. rom.ima_enc with MD5 checksum  : 9731F8EC2C0C46676F78B56BEFB44417

[Change/Add]: 
(S5B):

[Bug Fixed]:
S5B:	
	[182807] The BMC didn't record any event when unplug the PSU from PSU slot.(Slot 1/2) (separate from issue 181568)
	[186514] The sensors of ''Temp_Outlet'' and ''Airflow'' (ME function) unable to get the reading (separate from #186228).
	[186574] [RR11.5 WebUI] The function of SAS IT Management has been removed from BMC RR11.5 WebUI, please update ESMS SPEC (v101) if no support.
	[186575] [RR11.5 WebUI] The function of System Firewall has been removed from BMC RR11.5 WebUI, please update ESMS SPEC (v1.01) if won't support it.
	[186659] [F2_3] The Quanta ICTS Test was failed on ''Set Sensor Event Enable'' and ''Get Sensor Event Enable'' with tool QICTS0.16.
	[186816] [F2_3] Quanta ICTS Inband Test failed on ''Set Sensor Event Enable'', ''Get Sensor Event Enable'' and ''Set LAN Configuration Parameters#72'' with tool QICTS0.16. (similar to #186659 for outband)
	[187558] Sensor Number ''0x90'' cannot be decoded and BMC SPEC v007 doesn't have related definition.
	[187565] [RR11.5/WebUI] There is an abnormal character be displayed when update BIOS FW via WebUI.
	[187608] [AST2500] BMC WebUI RKVM has no screen(No Signal) once system boot to DOS environment.(AST2400 passed)
	[187818] [RR11.5/SNMP] The SNMP version doesn't match between the actual trap Type and WebUI Settings.
	[187231] [RR11.5 WebUI] The quantity of IPMI Event Log didn't sync the current SEL quantity.
	[188116] It should be capital letter for Proper Nouns ''Bios'' and ''Post'' of POST Error log in WebUI.
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.08.00
==========================================================================
Version: 2.08.00
Release Date: 2016.10.11

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 3CB50187
2. rom.ima with MD5 checksum      : A7C01F2A136CDF81BB0D92E18AA0B96A
3. rom.ima_enc with MD5 checksum  : 9D76AA39C84C81F3418BAF7560C71044

[Change/Add]: 
(S5B):
      Add support SNMP function.

[Bug Fixed]:
S5B:	
		
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin


==========================================================================
        S5B AST2500 BMC FW Release v2.07.00
==========================================================================
Version: 2.07.00
Release Date: 2016.10.06

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 3CB6CCA0
2. rom.ima with MD5 checksum      : DE7D4D04BEF874137A334668CF06DB21
3. rom.ima_enc with MD5 checksum  : D10F87DB453721883BE3F3AEB7F8FA90

[Change/Add]: (S5B)

[Bug Fixed]:
S5B:	[175851] BMC WEBUI can't get PSU Predictive failure detail information. (OTP / OCP / .....) 
		[186228] There are some sensors unable to get the reading, ''Temp_BP_3.5'', ''Temp_Riser1'', ''Temp_Riser3B'', ''Temp_PCH'', ''Temp_Outlet'' and ''Airflow''. 
		[186307][Suggestion] Please check the possibility to implement the feature ''BIOS POST Code'' to BMC WebUI as BMC did for Grantley platform.
		[186353][H1_1] BMC record abnormal SEL ''Management controller off-line'' when idle or execute warmboot cycling test. [186575][RR11.5 WebUI] The function of System Firewall has been removed from BMC RR11.5 WebUI, please update ESMS SPEC (v1.01) if won't support it.
		[186370][H2_1]BMC recorded abnormal event about ''Power Supply PSU2_Status | Predictive failure | Deasserted '' and ''Processor CPU0/1 Thermal Sta'' when system stress under windows server 2016. 
		[186969] The naming format of PSU OT and UV failure event didn't follow the QCI_SPX_EventLogTable_v2_15. 
		[187142][RR11.5/Basic Fun.] Max FRU size still show 256bytes, it should be 512 for Purley.
		[187182][RR11.5/WebUI] (1)Snapshot ''BIOS POST code'' in SPEC ''ESMS_SPX_User_Guide_HTML5_WebUIv103'', please define in detail and (2)BIOS POST "c"ode should use upper case 
		[187241] [RR11.5/WebUI] The current FRU Device ID only implement ''0'' and ''1'', please also add the ID 10 and ID 16 for NIC&SAS FRU.
		[187243][RR11.5 WebUI] The FRU Device Name of ID 0 doesn't match with current FRU via ipmitool.
		[187313] The current SNMP community string is different from the definition of BMC Standard SPEC v2.16.
		[187396] BMC Sensor Reading cannot monitor correct value for Temp_VR_CPU0 and Temp_VR_CPU1.
		
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
		
==========================================================================
        S5B AST2500 BMC FW Release v2.06.00
==========================================================================
Version: 2.06.00
Release Date: 2016.09.22

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 3E418F14
2. rom.ima with MD5 checksum      : E67C9A09CE33D839062CA222D819C017
3. rom.ima_enc with MD5 checksum  : 484DF38A00B3E7543FE1245A5385525A

[Change/Add]: (S5B)

[Bug Fixed]:
S5B:	[180592] [RR11] There is no BMC SEL be recorded after perform ACPI shutdown by WebUI->Power Control.
		[180595] [RR11] Unable to detect the product name from current FRU field on WebUI->FRU Information.
		[181620] The BMC is not ready for BIOS Out-of-Band flash.(separate from 181620).
		[180661] Incorrect FRU info and setting on the latest VRC FRU version 0.3.
		[186448] Unable to detect the BMC chipset under BMC WebUI->Dashboard->Device Information.
		[186454] The BMC WebUI Dashboard function of ''Power Cycle - Up Time'' always keep on ''4d 6hrs'' after perform the power control (Off/Reset/Cycle).
		[186457] [F2_3] The BMC will record ''Microcontroller/Coprocessor #0x16 | Transition to Running'' during the power control test.
		[186458] The function of Sensor Monitoring could not detect the PSU ERROR SDR under BMC WebUI/Dashboard/Sensor Monitoring.
		[186511] (1)Please add notice to remind user the consequence if unlock Preserve checkbox (2)notice for "Preserve all configuration" is not proper
		[186512] Continued tracke #186510, failed to download SEL log text file from WebUI.
		[186757] [F2_3] The BMC I2C stress test failed at ''bus=1 addr=0x94'' and the default account/password of tool shall be ''qct.admin''.
		[186785] The network communications protocol ''HTTP'' should be disabled and support ''HTTPS'' only under RR11.5 Redfish functions.

[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: cmb9.admin
		
==========================================================================
        S5B AST2500 BMC FW Release v2.05.00
==========================================================================
Version: 2.05.00
Release Date: 2016.09.08

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 40CD9EC9
2. rom.ima with MD5 checksum      : 399129FA091BF754F643945B6FAD1853
3. rom.ima_enc with MD5 checksum  : 71F0B9CD5C2D49D4B48B344DC62EA702

[Change/Add]: (S5B)

[Bug Fixed]:
S5B:	[179643] (SKX-F, LBG LAN) BMC has no temperature sensor for OCP2.0 NIC devices.
		[179650] (SKX-F, LBG LAN) BMC has no FRU file for OCP2.0 NIC devices.
		[186228] There are some sensors unable to get the reading, ''Temp_BP_3.5'', ''Temp_Riser1'', ''Temp_Riser3B'', ''Temp_PCH'', ''Temp_Outlet'' and ''Airflow''.
		[186395] [All] System failed to power on by press Power button before BMC ready.(should be OK according to BMC Std. v2.14).
		
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: qct.admin
		password: qct.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.04.00
==========================================================================
Version: 2.04.00
Release Date: 2016.09.01

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 4127736C
2. rom.ima with MD5 checksum      : 06CA087383DEF1C6C2388F43BD985E77
3. rom.ima_enc with MD5 checksum  : 5CE153C6E51F2C3970B5E5925E9C1173

[Change/Add]: (S5B)

[Bug Fixed]:
S5B:	[178251] (3.5'' Hybrid) Abnormal BMC SEL recorded after flash BIOS 1A03 ME from 1A03 under Win2012R2.	
		[182957] BMC will record abnormal log ''[Unknown][Slot or Connector](undefined state) - Asserted'' and ''[PCH Thermal Trip][Temperature]State Asserted - Asserted'' during reboot from windows.
		[186041] BMC record incorrect 2 times [Power off/down] log when DC power off(expected is 1).
		[186043] [H4_1]BMC record system DC power ON log incorrectly "[Power off/down Asserted]" (should be Deasserted) according to Std_event table spec
		[180631] [Hybrid_B1] BMC record error log ''Unknown ME FW Health'' and ''Watchdog '' during DC stress.
		[186186] There are lots of BMC SEL only report sensor number (sensor name for PSU, Temperature are missing)
		[186124] [H2_1]BMC recorded abnormal event about Power Supply PSU1_Status and Temperature #0x57  when Warmboot test under RHEL 7.2
		[186110] [H4_1] Abnormal BMC SEL(sensors a3/34/67) for system AC power cycles.
		[186194] The sensor number of 34h, 40h, 66h, 67h and A3h haven't been defined to Projecgt BMC SPEC v06.
		[186182] [F1_1] Both our LBG1 systems were failed to DC ON after MB FRU flash.(ok to boot if disable BMC)
		[186204] The sensor name of PSU_Redundancy does not match with project BMC Spec v06.
		[183146] After inject ''ei.injectUpiError(0,0,1)'',it showed''[Unknown][Processor] Correctable Error(undefined Processor event)/ CPU 0/ QPI Port 0 - Asserted'' (separate from issue 180469)
		[180518] It would show ''(undefined Memory event)'' for Correctable ECC event after injected Memory ECC Correctable Error to  DIMM E0/E1/F0/F1/L0/L1/M0/M1.
		[181381] [RR11] Please defines if the RR11 or RR11.5 support the SOL setting as RR2 (separate from  #180554).
		[186189] Failed to download SEL log from WebUI via IE 11.0.34. (Firefox 48.0.2 is Passed)
		[186201] [T4_1] BMC record critical logs about memory during DC power cycle under RHEL 7.2.
		[179964] [RR11] There are 48 sensors got the critical status on BMC Web with BMC FW 1.07.
		[178715] BMC SEL timestamp is incorrect during AC cycle(Incorrect timestamp is 01/01/2012)
		[173820] MicroSD no function
		[179966] [RR11] There are 14 Temp sensors got the 0 degrees C with BMC FW 1.07.
		[181461] Both two CPU PROCHOT LED on MB light ON after switch BIOS chip with new FW 1A06.
		[181774] Cold redundancy no function
		[180336] [Hybrid_B1] BMC didn't record error log when user insert two different PSU(PSU_1 DPS-500AB-14 A  / PSU2 DPS-750AB-30 A)
		[182807] The BMC didn't record any event when unplug the PSU from PSU slot.(Slot 1/2) (separate from issue 181568)
		[186046] [H4_1]BMC time check failed after boot in RHEL72 and idle 3mins, time difference getting bigger by time.
		[186068] (1)with ARP environment, the BMC will record lots of ''Temperature BroadcastSts'' event and full SEL up very quickly. (2)also help clarify why this sensor belongs to Temperature..
		[186182] [F1_1] one of our systems was failed to DC ON after FRU/BoardID flash.(ok to boot if disable BMC)
		[186202] ''Chassis Power'' and  ''Temp_DIMM_DEF''.use duplicated sensor number #ADh.
		[186206] [F2_3] The SUT would not reboot after executed the IPMI command ''ipmitool chassis power reset''.
		
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: qct.admin
		password: qct.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.03.00
==========================================================================
Version: 2.03.00
Release Date: 2016.08.22

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 41DFB2E3
2. rom.ima with MD5 checksum      : E04716D24308F7D1F59AD204DF55D69A
3. rom.ima_enc with MD5 checksum  : 6DAFE95468260B0CFF7A2197BE25C6F0

[Change/Add]: (S5B)
1. Enable Fan Speed Control

[Bug Fixed]:
S5B:	[178533] ''Shared NIC(OCP Mezz)'' setting in BIOS Setup /BMC LAN port config cannot be saved successfully
	[179968] [RR11] The BMC Web page of Sensor would keep on loading and halt with BMC FW 1.07.
	[180105] The MB-FRU flash fail under RHEL 7.2 if using the script in S5B-MB (LBG-4)-3.zip (VRC ID#83921).
	[180568] [RR11] The BMC SEL could not be restored after perform the Backup/Restore function for all configurations in Maintenance Menu.
	[180592] [RR11] There is no BMC SEL be recorded after perform ACPI shutdown by WebUI->Power Control.
	[184866] BMC cannot connect with ON82599 if set ''BMC LAN port'' configuration to ''Shared-NIC(OCP Mezz)'' ,Intel X540 is PASS. 
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: qct.admin
		password: qct.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.02.00
==========================================================================
Version: 2.02.00
Release Date: 2016.07.28

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 42A2631F
2. rom.ima with MD5 checksum      : 142E7519658ABD16A40FA5A2825E08D7
3. rom.ima_enc with MD5 checksum  : 976C45F0FFFDC889C15C970442592FD3

[Change/Add]: (S5B)

[Bug Fixed]:
S5B:	[179726] [Hybrid]BMC RKVM doesn't work.
	[181314] [RR11] The current SDR name of ''BMC FW Health'' do not match with BMC FW SPEC v004 (separate from #178790).
	[183375] Some DC power cycles took longer (about 100s) than average. (separate from issue 179365)
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: qct.admin
		password: qct.admin

==========================================================================
        S5B AST2500 BMC FW Release v2.01.00
==========================================================================
Version: 2.01.00
Release Date: 2016.07.21

AMI Subversion Revision: AMI SPX RR11.5

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 42C0DD7B
2. rom.ima with MD5 checksum      : B31D401A4B962AAF906EBAAFFFD4AC2A
3. rom.ima_enc with MD5 checksum  : 808720F8BDF95CCEC0D84B2168CFB335

[Change/Add]: (S5B)

[Bug Fixed]:
S5B:	[173991] BMC function is not ready for TE to develop Diagnostic tool
	[177573] (2.5'' All Flash)BMC will disconnect if configuration address source with Static address or using DHCP from CMS.
	[178961] BMC WEBUI can upload ''rom.ima'' and it should pop out error message to notice user.
	[180552] [RR11] The function of VMCli is not ready, please implement the VMCli for test.
	[180632] BMC LAN port LED turned OFF after 12hrs broadcast storm stress.
	[178531] Ping BMC directly via Dedicate-NIC and it has some packages lost.
	[178536] BMC WebUI is not ready for user to update BIOS.
	[178715] BMC SEL timestamp is incorrect during AC cycle(Incorrect timestamp is 01/01/2012)
	[178936] BMC LAN port configuration cannot changed in BIOS/ Server Mgmt/, always keep at Dedicated-NIC after changed the item to another setting save and reset.
	
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: qct.admin
		password: qct.admin

==========================================================================
        S5B AST2500 BMC FW Release v1.10.00
==========================================================================
Version: 1.10.00
Release Date: 2016.06.03

AMI Subversion Revision: AMI SPX RR11

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 55C63210
2. rom.ima with MD5 checksum      : 0F5307411458F792A3E33C52AF919AA5
3. rom.ima_enc with MD5 checksum  : B9C797671CED1B4D2D72BC6D2523BFCF

[Change/Add]: (S5B)
S5B:	Add ME sensor: Airflow and Temp_Outlet

[Bug Fixed]:
S5B:	177382 [Stress](2.5'' All Flash)The system got many failed messages after running StressAPPtest under RHEL 7.1
		178364 [2.5'' All Flash]BMC is not ready for read CPLD version and checksum
		178779 The sensor of Temp_Inlet and Temp_Outlet are disappear on current sdr list. 
		178783 The sensors naming format of FAN_SYSx_x do not match with BMC FW SPEC rev001, the correct name please refer to ''Std_BMC_SPEC_SYS_FAN.jpg''. 
		180091 [Hybrid_B1] There is an error recorded ''Invalid/Unsupported Command'' during the PMBus stress test.
		180153 SEL recorded CATERR_MCERR but not CATERR_IERR after triggered CATERR_IERR by ITP fixture. 
		180364 The first letter for all of ''Sensor Type'' in WebUI is not upper case.
		180557 A lot of abnormal event generated when try to trigger Thermal Trip.
		180624 There is no ''Fan redundancy lost'' SEL when unplug SUT fan module, mismatch to Std. Event table definition for redundancy fan.
		180630 BMC SNMP Community String is ''AMI'', mismatch to Std. definition(S5B BMC FW SPEC also with incorrect ''Quanta'').
		180839 SEL recorded a lot of abnormal event ''[Volt_PVNN_PCH]'' and ''[Volt_PVCCIN_CPU0]'' after injected Memory ECC Uncorrectable error via MEI fixture.
		181043 [Hybrid_B1]  BMC v1.08.00 has no  "Processor CPU_x present", but 1.09.00 has, release note should add this change list.
		181054 [Hybrid_B1] Sensor ''QEventOnly'' and ''Chassis Power'' has not be defined to BMC SPEC 0.03
		181082 [Hybrid_B1] CPU sensor name(CPU_0) didn't match QCI_SPX_EventLogTable_v2_10 (CPU0)
		181312 [RR11] There are 3 SDRs use to the same sensor number ''B2h'' between the current BMC FW v1.09 and BMC SPEC v004 (separate from #178790).
		181314 [RR11] The current SDR name of ''BMC FW Health'' do not match with BMC FW SPEC v004 (separate from #178790). 
		181309 [RR11] Please sync the SDR's naming rule of ''Fan_SYSx_x'' between BMC Std SPEC and EventLog Table (separate from  #178783).
		181568 [Hybrid_B1]  BMC record ''Unknown'' event during un-plug/plug PSU (side effect of issue 180346)  
		
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: admin

==========================================================================
        S5B AST2500 BMC FW Release v1.09.00
==========================================================================
Version: 1.09.00
Release Date: 2016.05.19

AMI Subversion Revision: AMI SPX RR11

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 55CEC79D
2. rom.ima with MD5 checksum      : DFCB1A7E99D06D7BB65E1E3B241DCFBC
3. rom.ima_enc with MD5 checksum  : 74F09C2270CF0B53AD0B61053DFCE044

[Change/Add]: (S5B)
S5B:	Add Processor CPU_x present event when CPU detected

[Bug Fixed]:
S5B:	
		178592 - (3.5'' Hybrid) Unplug power cord of PSU1, BMC continually record abnormal PSU1 Predictive failure/Failure SEL during SUT stress test.
		178599 - (ALL SKU) ID LED didn't act very well when press Front panel ID Button.
		178715 - BMC SEL timestamp is incorrect during AC cycle(Incorrect timestamp is 01/01/2012)
		178801 - ''Last state'' for Restore on AC Power Loss in not workable, system not power on after restore AC power.
		179632 - The SUT not power on automatically after AC off then AC on if ''Restore on AC Power Loss'' set to ''Last State'' in BIOS setup.
		179756 - [Hybrid] Status LED didn't blink when remove power cord (SEL severity is critical ''Power Supply Input Lost (AC/DC) - Asserted'' )
		179970 - [RR11] The sensor reading of Temp_DIMM_x would display abnormal symbol by ipmitool v1.8.15.
		180367 - Sensor Name is ''Unknown'' for event ''TCC Activation''.
		180389 - Severity of event ''TCC Activation - Asserted'' is Critical, but QCI_SPX_EventLogTable_v2_10 defined it should be ''Warning''.
		180395 - The Sensor Number of event ''TCC Activation - Asserted'' is not correct (BMC SPEC rev.003 : it should be 7Ch,7Dh)
		180433 - Sensor Name ''Temp_CPU0'' and ''Temp_CPU1'' (BMC1.08) and BMC SPEC 0.3. are not consistent with ''QCI_SPX_EventLogTable_v2_10''
		180591 - [RR11] The BMC SEL ''Temperature Temp_CPU0/1 - UC/UNC'' be recorded after perform the Hard Reset by WebUI->Power Control.
		180644 - Unknown FRU info(ID 1) after SUT flash the latest VRC FRU version 0.3.
		180848 - [Hybrid_B1] BMC didn't record ''Fan present-Deasserted" event when user removed fan.
		
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: admin



==========================================================================
        S5B AST2500 BMC FW Release v1.08.00
==========================================================================
Version: 1.08.00
Release Date: 2016.05.05

AMI Subversion Revision: AMI SPX RR11

[Utility]:
1. SOCFLASH (version v.1.12.03)

[Firmware Images]:
1. rom.ima with checksum          : 55BD6AE9
2. rom.ima with MD5 checksum      : E0D19AFD5322E20836F759FB90D745EC
3. rom.ima_enc with MD5 checksum  : 8C645FD5DB0706E783CA958B0B9A3107

[Change/Add]: (S5B)
S5B: Add NVMESSD_X temperature of 2.5" HDD BP

[Bug Fixed]:
S5B:	178406 - [Hybrid] BMC LAN LED's behavior is incorrect(Link LED is always blinking.)
		179473 - [Hybrid] "BMC Cold Reset" test failed(2 cycles).
		179585 - [Hybrid] BMC will record PSU log after BMC cold reset 
		179632 - The SUT not power on automatically after AC off then AC on if ''Restore on AC Power Loss'' set to ''Last State'' in BIOS setup.
		179737 - [Hybrid]Fan will stop for 20~30 seconds during BMC update(The behavior didn't match with BMC standard SPEC)
		179846 - for Rossi.Lin to approve >> [Hybrid] BMC supported session for RMCP/RMCP+ in S5B BMC FW Spec.rev002 is 36, but actually only supported 15.
				
[Known issue]: 
N/A

[Notice]:
	1. Update BMC FW via command line:
		a) put dos4gw.exe, socflash.exe, and rom.ima in same directory.
		b) in DOS, run "dos.bat".
		   in Window, run "win.bat"
		   in Linux, run "linux.sh"
	2. Force to update BMC FW via command line:
		a) run "socflash if=XXXX.ima -s option=x flashtype=2" in DOS.
	3. Update BMC FW via Web UI:
		a) Please select rom.ima_enc as image file and doesn't upload Signimage key.
	4. login account: 
		a) IPMI access account for WEBGUI and IPMITOOL.
		username: admin
		password: admin


=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.07.00
Release Date: 2016/04/28

[Utility]:
1. SOCFLASH (version v.1.12.03 )

[Firmware Images]:
1. rom.ima with checksum          : 55BA95DC
2. rom.ima with MD5 checksum      : DF571FEF60E8B350EED4EBAEF4FC52F3
3. rom.ima_enc with MD5 checksum  : 2B4736BFAC617C688F1132464C43A3BA

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor. (ipmitool sensor list)
3. Please use IPMI command to check event. (ipmitool sel elist)

[Changed]:
1. Synchronize with AMI patch included ASPEED patch v9(update to 2016/04/26)
3. Add TjMax for fan control

[Bug Fixed]:
[178969] Add Broadcast issue solution to solve AC cycle stress failed 
[178790/178787/177859/178783/175250/178784/178774] update spec
[178801]fix "Last state" for Restore on AC Power Loss

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade


=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.06.00
Release Date: 2016/03/25

[Utility]:
1. SOCFLASH (version v.1.12.03 )

[Firmware Images]:
1. rom.ima with checksum          : 573EAED2
2. rom.ima with MD5 checksum      : 4FA179C9FB1D6AC29E2BE23CA06DEBAE
3. rom.ima_enc with MD5 checksum  : CF719B37EF4D57A49180C9DFC2BDB79A

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor. (ipmitool sensor list)
3. Please use IPMI command to check event. (ipmitool sel elist)

[Changed]:
1. BMC Power Restore Policy (random delay in 10 seconds to power on) 
2. Synchronize with AMI patch
3. Add PCH thermal sensor (Supported from PCH QKR6 version)
4. fix only read one PSU status

[Bug Fixed]:

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade
2. Web server is ready, but UI function is not ready
3. When DC cycle, ME will issue OEM event:PECI over DMI interface error ,checking with Intel

=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.05.00
Release Date: 2016/03/11

[Utility]:
1. SOCFLASH (version v.1.12.03 )

[Firmware Images]:
1. rom.ima with checksum          : 5764D015
2. rom.ima with MD5 checksum      : 511B01DB8F8E1E88365655E228F85DE4
3. rom.ima_enc with MD5 checksum  : 4C05508EC405B02876B228CAC97DD9D1

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor. (ipmitool sensor list)
3. Please use IPMI command to check event. (ipmitool sel elist)

[Changed]:
1. Add PSU Present/ Redundancy/ Fan Direction Error
2. Modify PSU Temperature (follow QCT PMBus Command)
3. Add PSU Data Command (MFR Revision/FW Revision)
4. Add CPU_DIMM_VRHOT
5. Add CPU_DIMM_HOT
6. BMC Power Restore Policy (delay 5 seconds to power on) 
7. Delay 120 seconds to monitor ME sensor (Waiting BMC ready)  

[Bug Fixed]:

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade
2. DIMM/PCH Sensor is not ready,checking with Intel IPS#6000153718
3. Web server is ready, but UI function is not ready
4. When DC cycle, ME will issue OEM event:PECI over DMI interface error ,checking with Intel

=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.04.00
Release Date: 2016/02/24

[Utility]:
1. SOCFLASH (version v.1.12.03 )

[Firmware Images]:
1. rom.ima with checksum          : 579E57E9
2. rom.ima with MD5 checksum      : B21F6DA3B1168A2BD73B671011905BB3
3. rom.ima_enc with MD5 checksum  : B08F022DE0CA1A3E79783B5833218E02

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor. (ipmitool sensor list)
3. Please use IPMI command to check event. (ipmitool sel elist)

[Changed]:
1.Add power on time count

[Bug Fixed]:
[174541]DC stress failed with many error log (Voltage / Temperature / Processor /PSU...)
[174584]System LED didn't blink when FAN failed
[174603]"Volt_VR_CPU_1" and "Temp_VR_CPU1" reading is ''No Reading'' (CPU_0 : Passed)
[175373]Heat temp sensor(Temp_Ambient_FP) to trigger upper critical threshold and system status LED didn't blink. (similar to S5B #174584)
[175450]BMC FW package(s5bv1020) didn't include windows update tool(DOS and Linux is ready)
[175732]I2C Stress test failed (S5B_i2c_test_v01) (Port80 is all "OFF" and ping BMC IP sometimes failed)

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade
2. DIMM/PCH Sensor is not ready,checking with Intel IPS#6000153718
3. Web server is ready, but UI function is not ready
4. When DC cycle, ME will issue OEM event:PECI over DMI interface error ,checking with Intel

=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.03.00
Release Date: 2016/02/04

[Utility]:
1. SOCFLASH (version v.1.12.03 )

[Firmware Images]:
1. rom.ima with checksum          : 57A5DA1D
2. rom.ima with MD5 checksum      : EEE6FDAC20F016054D48EEB4B85A7DE0
3. rom.ima_enc with MD5 checksum  : 137899B7DCEB06F20A9968A2FF5BADFD

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor. (ipmitool sensor list)

[Changed]:
1.Add OEM command for SD card test
2.GPIO Interrupt event (CAT ERROR/PCH Thermal Trip/CPUx THERMTRIP)


[Bug Fixed]:
[173812] It becomes slow to operate under BIOS Setup menu .
[173643] BMC didn't record related SEL when MB CATERR LED ON.
[174512] Fan sensor(Dual rotary Fan) name of SDR info is incorrect (doesn't meet ME SPEC and BMC SPEC)
[174569] BMC inband command didn't work after SUT reboot in Windows (using AMI solution for Bootloader issue)
[174599] CPU temp sensor is missing from SDR list
[174603] "Volt_VR_CPU_1" and "Temp_VR_CPU1" reading is ''No Reading'' (CPU_0 : Passed)

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade
2. DIMM/PCH Sensor is not ready,checking with Intel IPS#6000153718
3. Web server is ready, but UI function is not ready
=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.02.00
Release Date: 2016/01/21

[Utility]:
1. SOCFLASH (version v.1.12.03 )

[Firmware Images]:
1. rom.ima with checksum          : 57B12555
2. rom.ima with MD5 checksum      : EAB5A1EE970B8531523A75F085ED46DE
3. rom.ima_enc with MD5 checksum  : 6C4A48C5B000908BA0A8D9FF1A11698C

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor. (ipmitool sensor list)

[Changed]:
1.Add Thermal sensor(FP/BP/Riser/MB/PSU),not include CPU/DIMM/PCH
2.Support MB/FP FRU
3.Support I2C 0~13 
4.fix Fan sensor reading
5.Use official SOCFLASH v.12.03

[Bug Fixed]:
1.[173629] Fix BMC Self-test

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade
2. CPU/DIMM/PCH Sensor is not ready,checking with Intel IPS#6000151390
3. Web server is ready, but UI function is not ready


=====================================================================
        S5B AST2500 BMC FW Release
=====================================================================
Version: 1.01.00
Release Date: 2016/01/04

[Utility]:
1. SOCFLASH (version v.test.0 )

[Firmware Images]:
1. rom.ima with checksum          : 57DC5986
2. rom.ima with MD5 checksum      : 9093DAF636805FE62E7137DC7BCDB904
3. rom.ima_enc with MD5 checksum  : 6E42F865B98389AF6FE00C3FEFD9C59B

[Notice]:
1. This version is used to do EVT test.
2. Please use IPMI command to check sensor monitor.

[Changed]:
1.First EVT release version

[Bug Fixed]:
N/A

[Known issue]:
1. Disable BMC JTAG interface for HW CPLD Upgrade
2. ME Sensor is not ready
3. Web server is ready, but UI function is not ready
4. Official SOCFLASH tool for Purley platform is not released
