Ports report

The following table describes the items in a ports report.

Item

Description

CHB Name of the channel board
Type Package type of the channel board
Port Location Name of the port on the channel board
Port Attribute Attribute of the port
TCP Port Number Port number to use for a socket (decimal)
Internal WWN / Internal iSCSI Name WWN / iSCSI name of the port
Fabric One of the Fibre topology settings indicating the setting status of the Fabric switch
Connection Type One of the Fibre topology settings
  • Point to Point
  • FC-AL
IPv4 : IP Address

IPv4 address of the port

Output example: 192.168.0.100

IPv4 : Subnet Mask

IPv4 subnet mask of the port

Output example: 255.255.255.0

IPv4 : Default Gateway

IPv4 default gateway of the port

Output example: 255.255.255.0

IPv6 : Mode IPv6 settings of the port
  • Enabled
  • Disabled
IPv6 : Link Local Address IPv6 link local address of the port (16-digit hexadecimal)
IPv6 : Global Address

IPv6 global address of the port.

Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)

IPv6 : Global Address 2

IPv6 global address 2 of the port.

Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)

IPv6 : Assigned Default Gateway Assigned IPv6 default gateway
Selective ACK Selective ACK mode
  • Enabled
  • Disabled
Ethernet MTU Size (Byte) MTU settings (binary)
  • 1,500
Keep Alive Timer iSCSI keep alive timer (0 to 64,800) (sec)
VLAN : Tagging Mode Tagging mode of VLAN
  • Enabled
  • Disabled
VLAN : ID Number of VLAN set to the port (1 to 4,094)
CHAP User Name User name for the CHAP authentication
iSNS Server : Mode iSNS mode settings
  • ON
  • OFF
iSNS Server : IP Address IP address of the iSNS server (30 to 65,535)
iSNS Server : TCP Port Number Number of the TCP port used in iSNS (binary)
Address (Loop ID) Fibre port address and Loop ID of the port
Port Security Security of the port
  • Enabled
  • Disabled
Speed Data transfer speed of the port
SFP Data Transfer Rate Maximum transfer rate of SFP which the mounted package supports.
  • 8G
  • 10G
  • 16G
  • 32G
  • A hyphen (-) is displayed if Type is 10iSCSI2c (CHB) or NAS module (CHB).

T10 PI Mode

Indicates whether the T10 PI mode can be applied to the port.

  • Enabled
  • Disabled
  • Blank if the port type is a Fibre port other than 16FC2(CHB). For iSCSI ports, a hyphen (-) is displayed.
Resource Group Name Name of the resource group to which the port belongs
Resource Group ID ID for the resource group to which the port belongs (0 to 1023)
Number of Hosts The number of the hosts registered to the port
Number of LUNs The number of the LU paths defined to the port
Number of LDEVs The number of the logical volumes that can be accessed through the port
Number of PGs The number of the parity groups having the logical volumes that can be accessed through the port
Number of DKBs The number of the disk boards controlling the parity group that contains the logical volumes that can be accessed through the port
Parent Topic