Port ID

Identifier of the port.

LUN ID

Identifier of the selected LUN paths.

LDEV ID

LDEV identifier, which is the combination of LDKC, CU, and LDEV.

LDEV Name

Name of the LDEV.

Host Group Name / iSCSI Target Alias

Name of the host group or iSCSI target alias.

iSCSI Target Name

iSCSI target name.

Capacity

Size of each logical volume.

Attribute

Displays the attribute of the LDEV.

• Command Device: Command device.
• Remote Command Device: Remote command device.
• Data Direct Mapping: LDEV of the data direct mapping attribute.

• NAS Platform (User LU): LDEV used for storing the NAS user data. This value appears if the NAS module is installed.

• NAS Platform (System LU): LDEV used for storing the NAS firmware system data. This value appears if the NAS module is installed.

• Hyphen (-): Volume in which the attribute is not defined.

Asymmetric Access States

Asymmetric access states of the port. When using iSCSI, a hyphen (-) is displayed.

Active/Optimized: Access from the host is preferentially performed on this port.

Active/Non-Optimized: When the Active/Optimized port is disabled, access from the host is performed on this port.

T10 PI

The LDEV's T10 PI attribute setting (Enabled or Disabled).

Remove from Delete process

Removes LUN paths from the Selected LUN Paths table.

Delete all defined LUN paths to above LDEVs

Removes LUN paths from the Selected LUN Paths table.

When this check box is selected, the host groups of all the alternate paths in the LDEV displayed in the Selected LUNs table must be assigned to the Storage Administrator group permitted to manage them.