Failed to login is displayed.

Check that the user name and password are correct. If you forget your password, log in with the Security Administrator (View & Modify) and set a new password.

To confirm that the SVP and the storage system can communicate normally, check the following:

• LAN cabling is correct and connections are in place.
• IP address of SVP and IP address of GUM are in the same network.
• There is no duplicate IP address in the network to which SVP and GUM belong.

• GUM is pingable from SVP.

When you are using an external authentication server such as LDAP, check the following:

• The authentication server has been started.
• The authentication server can be accessed from the SVP via the network
• The user account has been established on the authentication server
• The connection information for the authentication server that has set on the SVP is correct.

If the symptom recurs even after you correct the above settings, use the dump tool to collect Device Manager - Storage Navigator normal dump files to some recording media and then contact Hitachi Solution Support Center.

The Device Manager - Storage Navigator window is not displayed.

Make sure the URL of the desired SVP is registered to the Trusted sites section of the Internet Options dialog box.

Device Manager - Storage Navigator does not start even with repeated attempts.

Close all the web browser windows and then clear the web browser cache.

Use the Task Manager to check for "hung" or duplicate processes.

A network error occurred when you logged in to Device Manager - Storage Navigator.

Close all dialog boxes and log in to the Device Manager - Storage Navigator again. If the same error occurs, check the network environment.

Internet Explorer cannot display the webpage is displayed.

• Ensure that the network device is enabled.
• Ensure that the proxy server settings are correct if you use proxy for the network connection.

An error occurred during SVP processing is displayed.

• If the web browser is set up to use a proxy server, disable the proxy server.
• If a proxy server is not used in the web browser, wait a few minutes, update the screen, and log in again.

The login to a storage system from the Hitachi Command Suite server fails

If you change your password for a storage system, you need to change the information registered in Hitachi Command Suite. For details, see the section describing how to change storage system settings in the Hitachi Command Suite User Guide.