Local Storage System box

Displays the following information about the volume on the local storage system.

• LDEV ID (LDEV name): LDEV identifier and name. "---" displays for long names. Hover the mouse over it to display the complete name.
• Number of paths: Number of data paths between primary and secondary storage systems.

  Clicking the number displays the path list (UR only ).

• Provisioning Type, Encryption status, T10 PI: Provisioning type, encryption status, and T10 PI attribute of the local storage system's volume. Encryption status is displayed only when the volume's encryption is Enabled or Mixed. If ... is displayed, move the cursor over ... to display the hidden contents as a tooltip. T10 PI attribute information is displayed only if the T10 PI attribute is enabled.
• Attribute, capacity: Local storage system's volume attribute and capacity. If the volume does not have an attribute, only the capacity is displayed.
• Journal ID (Encrypted): Journal identifier and encryption status. The encryption status is displayed only when the volume's encryption is Enabled or Mixed. If an elipsis (...) is displayed, move the cursor over the elipsis to display the hidden contents as a tooltip.
• Model/Serial number, CLPR ID:CLPR name: Local storage system’s model, serial number, CLPR ID, and CLPR name.

Status

Pair’s status.

Path Group

Pair’s path group. Clicking the path group number displays the remote path list if the P-VOL is in the Local Storage System..

Mirror ID

Pair’s mirror identifier

Remote Storage System box

Displays the information about the Remote Storage System.

• LDEV ID: LDEV identifier and name, which displays when you hover the mouse over it.
• Port name/Host group ID or iSCSI target ID/LUN ID: System’s port name, host group ID or iSCSI target ID and LUN ID. This information is useful when specifying an LDEV ID at pair creation. It does not change, even if you change path settings.
• Journal ID: Journal identifier.
• (VSP Gx00 models and VSP Fx00 models) Capacity: Remote system's volume capacity
• Model/Serial number: System’s model, serial number.

Status

The pair’s status

CTG ID

Consistency group identifier

Error Level

Whether pairs are split if an error occurs. Specified during the create pair procedure.

Secondary Volume Write

Indicates whether data can be written (Enabled) or not written (Disabled) to the S-VOL. The pair must be split for Enabled to display.

If the volume accessed is an S-VOL and can be written to, Enabled/Received or Enabled/Not Received is displayed. Indicates whether a write operation is received from the host or not.

In a 3DC multi-target and 3DC cascade configuration in which three UR sites are combined, if one of the mirrors set for the S-VOL is for delta resync, data cannot be written to the S-VOL, even if Enabled is set.

Initial Copy Priority

Initial copy scheduling order. The range is from 1 to 256 for UR in decimal.

The range is from 0 to 256 for UR-MF in decimal.

Paired Time

Date and time pair-creation completed.

Last Update Time

Date and time that the last update was run.

Pair Copy Time

Time used to copy the P-VOL.

Local Storage System

• Virtual storage machine: Virtual storage machine’s model type and serial number.
• Virtual LDEV ID: Volume’s virtual LDEV identifier.
• Device Name: Volume’s vrtual device name, in the format:

  virtual emulation type/number of virtual LUSE volumes/virtual CVS attribute

  - Only attributes that are specified display.

  - "CVS" displays at the end of the device name, if the virtual CVS attribute is specified.

  - A blank indicates no values are specified.

• Virtual SSID: Volume’s virtual SSID. A blank indicates that no virtual SSID is specified.

Remote Storage System

• Virtual storage machine: Virtual storage machine’s model type and serial number.
• Virtual LDEV ID: Volume’s virtual LDEV identifier.

Page Number

Current/Selected