This window appears when you click
Add on the
SNMP tab of the
Set Up Alert Notifications window if the SNMP protocol version is SNMP v1 or SNMP v2c.
Item
Description
Community
Specify the community to which SNMP traps are reported.
To select an existing community from a pull down menu, clear
New.
To create a community, select
New, and then enter a name.
You can enter up to 180 alphanumeric characters excluding the following symbols:
\ , / ; : * ? " < > | & % ^ '
Do not enter space characters at the beginning or the end of the value.
Send Trap to
Specify the IP address to which SNMP traps are reported.
To select an existing IP address from a pull down menu, clear
New.
To add an IP address, select
New, and then enter an address.
IPv4: Enter a valid IPv4 address in the format
XXX.XXX.XXX.XXX (where
XXX is a number from 0 to 255)
IPv6: Enter a valid IPv6 address in the format
YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY: (where
YYYY is a hexadecimal number from 0 to FFFF). You can also use an IPv6 address in abbreviated format.
Minus symbol: Removes the IP address in that row.
Add IP Address: Adds an IP address. You can add up to 32 IP addresses.
