Change Request Authentication Setting window (SNMP v3)

This window appears when you click Change on the SNMP tab of the Set Up Alert Notifications window if the SNMP protocol version is SNMP v3.

Item	Description
User Name	Enter the name of the user permitted to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST. You can enter up to 32 alphanumeric characters, excluding the following symbols: \ , / ; : * ? " < > \| & % ^ Do not enter space characters at the beginning or the end of the value. Note: If you use a user name that has already been specified for Sending Trap Setting or Request Authentication Setting, specify the same settings for the following options that were specified for that name. Otherwise, SNMP traps might not be sent correctly. Authentication Authentication - Protocol Authentication - Password Encryption Encryption - Protocol Encryption - Key
Authentication	Select whether to perform authentication. Enable: Authentication is performed. Disable: Authentication is not performed. Authentication and encryption information is displayed only if authentication is enabled.
Authentication - Protocol	If authentication is enabled, select the authentication method. SHA MD5
Authentication - Change Password	Select to display the Password field and change the password. If you are enabling authentication, this selection cannot be cleared.
Authentication - Password	If authentication is enabled, enter a password. The password must be 8 to 64 alphanumeric characters, excluding the following symbols: \ , / ; : * ? " < > \| & % ^ Do not enter space characters at the beginning or the end of the value.
Authentication - Re-enter Password	Re-enter the same password.
Encryption	Select whether to perform encryption. Enable: Encryption is performed. Disable: Encryption is not performed. Encryption information is displayed only if encryption is enabled.
Encryption - Protocol	If encryption is enabled, select the encryption method. AES DES
Encryption - Change Key	Select to display the Key field and change the key. If you are enabling authentication, this selection cannot be cleared.
Encryption - Key	If encryption is enabled, enter a key. The key must be 8 to 64 alphanumeric characters, excluding the following symbols: \ , / ; : * ? " < > \| & % ^ Do not enter space characters at the beginning or the end of the value.
Encryption - Re-enter Key	Re-enter the same key.