Changing iSCSI target setting

Use LUN Manager to change the name or host mode of a iSCSI target. You can change only the host mode option of the host group for the initiator port. You cannot use this procedure on the host group for the external port.

Caution
  • Before changing the host mode of an iSCSI target, you should back up data on the port to which the iSCSI target belongs. Setting host mode should not be destructive, but data integrity cannot be guaranteed without a backup.
  • When a secret is changed two times or more for the same iSCSI target successively, perform the next change after waiting for the completion of the task that has been applied. If the secret is changed without waiting for the completion of the task that has been applied, the user name which you expected to be changed can not be incorporated.

Before you begin

To perform this task, following roles are required:

  • Storage Administrator (Provisioning) role
  • Security Administrator (View and Modify) role

Procedure

  1. Click Storage Systems, and then expand the Storage Systems tree.

  2. Click Ports/Host Groups/iSCSI Targets.

  3. On the iSCSI Targets tab, select the Port ID of the iSCSI target you want to change.

  4. Display the Edit iSCSI Targets window by performing the following:

    Click Edit iSCSI Targets. Or click More Actions and then select Edit iSCSI Targets. Or from the Actions menu, select Ports/Host Groups, iSCSI, and then Edit iSCSI Targets.

  5. In the Edit iSCSI Targets window, select ON and specify the values. The following values can be modified:

    • iSCSI Target Alias: Specifies the alias of the iSCSI target.
    • iSCSI Target Name: Selects the format from iqn or eui, and specifies the name of the iSCSI target.
    • Host Mode: Selects the host mode and the host mode option. For detailed information about host mode options, see Host mode options.
    • Authentication Method: Selects the CHAP authentication mode from Comply with Host Setting, CHAP, or None.
    • Mutual CHAP: Selects Enable or Disable. If Enable is selected, the mutual authentication mode is performed. If Disable is selected, the unidirectional authentication mode is performed.
    • User Name: Specifies the user name. You can use case-sensitive alphanumeric characters, spaces, and the following symbols:

      . - + @ _ = : [ ] , ~

    • Secret: Specifies the password. You can use alphanumeric characters, spaces, and the following symbols in a secret:

      . - + @ _ = : [ ] , ~

  6. Click Finish.

    If OK is clicked, either the Edit iSCSI Targets window or the Confirm window appears. If the Confirm window appears proceed to the next step. If the Edit iSCSI Targets window appears, go to step 3 and edit the settings again.

  7. In the Task Name text box, enter the task name.

    You can enter up to 32 ASCII characters and symbols, with the exception of: \ / : , ; * ? " < > |. The value "date-window name" is entered by default.

  8. Click Apply.

    If the Go to tasks window for status check box is selected, the Tasks window appears.
Parent Topic