Alert Notifications window

Summary

Item	Description
Notification Alert	Destination of the alert notification Host Report: Sends alerts only of SIMs that report to hosts. All: Sends alerts of all SIMs. Alert destinations are common to Syslog, SNMP, and Email.
Email Notice	Failure notification setting Enabled: Reports the SIM by email Disabled: Does not report the SIM by email
Syslog Server Notice - Transfer Protocol	Protocol to transfer the syslog TLS1.2/RFC5424 UDP/RFC3164
Syslog Server Notice - Primary Server	Whether to use the Syslog server Enabled: Reports SIM to the Syslog Server through Syslog. Disabled: Does not report SIM to the Syslog Server through Syslog
Syslog Server Notice - Secondary Server	Whether to use an alternate server for the Syslog server Enabled: Reports SIM to the alternate Syslog server through Syslog. Disabled: Does not report SIM to the alternate Syslog server through Syslog
SNMP Agent	Whether the SNMP agent is being used Enabled: Reports the SIM through an SNMP trap Disabled: Does not report the SIM through an SNMP trap
Set Up button	Displays the Set Up Alert Notifications window

Email tab

Item	Description
Mail Server	Mail server information (host name or IP address)
SMTP Authentication	Whether to perform SMTP authentication Enabled: Performs SMTP authentication Disabled: Does not perform SMTP authentication
SMTP Authentication - Account	SMTP Authentication account
Email Address - From	Source address of the email for failure information report
Email Address - Reply To	Return email address
Email Address - To	Destination address of the email for failure information report
Email Address - Cc	Carbon copy address of the email for failure information alert
Email Address - Bcc	Carbon copy address of the email for failure information alert
Send Test Email button	Sends a test SIM by email

Syslog tab

Item	Description
Primary Server - IP Address	IP address of the Syslog server
Primary Server - Port Number	Port number of the Syslog server
Secondary Server - IP Address	IP address of the alternate Syslog server
Secondary Server - Port Number	Port number of the alternate Syslog server
Location Identification Name	Identification name of the storage system to transfer the SIM to the Syslog server
Retry	Retry setting Enable: Retry when communication with syslog server fails Disable: Does not retry when communication with syslog server fails
Retry Interval	Retry interval when communication with the Syslog server fails
Send Test Message to Syslog Server button	Sends a test SIM by syslog

SNMP tab (SNMP v1 or v2c)

Item	Description
Storage System Name	Storage system name
Contact	Administrator name and contact information, such as personnel and telephone number where you can inquire about the storage system
Location	Location of the connected storage system
SNMP Engine ID	SNMP engine identifier
SNMP Version	SNMP protocol version
Sending Trap Setting	Community: Community names to which SNMP traps are reported Send Trap to: IP address to which SNMP traps are reported
Request Authentication Setting	Community: Communities that have permission to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST Requests Permitted: IP addresses that have permission to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST
Send Test SNMP Trap button	Sends a test trap to the IP address registered for the storage system

SNMP tab (SNMP v3)

Item	Description
Storage System Name	Storage system name
Contact	Administrator name and contact information, such as personnel and telephone number where you can inquire about the storage system
Location	Location of the connected storage system
SNMP Engine ID	SNMP engine identifier
SMTP Context	SMTP context. This item is displayed only when NAS module is mounted.
SNMP Version	SNMP protocol version
Sending Trap Setting	Send Trap to: IP address to which SNMP traps are reported User Name: User name used for reporting SNMP traps Authentication - Mode: Whether authentication is enabled Authentication - Protocol: Authentication method if authentication is enabled Encryption - Mode: Whether encryption is enabled Encryption - Protocol: Encryption method used if encryption is enabled
Request Authentication Setting	User Name: Users that have permission to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST Authentication - Mode: Whether authentication is enabled Authentication - Protocol: Authentication method used if authentication is enabled Encryption - Mode: Whether encryption is enabled Encryption - Protocol: Encryption method used if encryption is enabled
Send Test SNMP Trap button	Sends a test trap to the IP address registered in the storage system