Create CLPRs window
This window appears when you click Create CLPRs on the Cache Partition window.
Create CLPR settings
Use the left side of this window to create CLPRs.
|
Item |
Description |
|
CLPR ID |
Displays the smallest CLPR ID of available CLPR IDs. Displays a blank if no CLPR ID is available. |
|
CLPR Name |
Enables you to enter the CLPR name. You can use up to 16 alphanumeric characters but cannot specify CLPR names that are already reserved. A blank is displayed if no CLPR ID is available. For details see CLPR names. |
|
Cache Size |
Enables you to select the cache capacity of CLPR. A blank is displayed if no CLPR ID is available. You can select 4 GB or higher value for the cache capacity of the CLPR, and the desired value can be selected in increments of 2 GB. The maximum available capacity (subtract the total usage capacity of other CLPRs from the total capacity of the storage system) is displayed as the upper limit value. |
|
Add |
You can add the CLPR set in the left side of the window to the Selected CLPRs table. |
Default CLPR table
Displays the information about CLPR 0.
|
Item |
Description |
|
CLPR |
Displays the CLPR ID and CLPR name. |
|
Cache Size |
Displays the cache capacities in the storage system.The values change depending on the created CLPR. |
Selected CLPRs table
Displays the information about the CLPRs to be created.
|
Item |
Description |
|
CLPR |
Displays the CLPR ID and CLPR name. |
|
Cache Size |
Displays the cache capacities in the storage system. |
Buttons
|
Item |
Description |
|
Change Settings |
Opens the Change Settings window. |
|
Remove |
Enables you to delete the selected CLPRs from the Selected CLPRs table. |