Add SNMP Trap window

The following table describes the fields and settings in the SNMP tab.

Item	Description
IP Address	Enter a new IP address or select an existing one. New: Enter a new IP address. Select: Select an existing IP address. IPv4: To set an IPv4 address, select IPv4, and enter four numbers within the range of 0 to 255. Example: XXX.XXX.XXX.XXX (X indicates a numeral) IPv6: To set an IPv6 address, select IPv6, and enter eight hexadecimal alphanumeric characters within the range of 0 to FFFF. You can also use an abbreviated-format IPv6 address. Example: YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates a hexadecimal digit)
Community	Enter a new community name or select an existing one. New: Enter a new community name Select: Select an existing community name You can use up to 180 alphanumeric characters excluding these symbols: (\ , / ; : * ? " < > \| & % ^ )

Item

Description

IP Address

Enter a new IP address or select an existing one.

New: Enter a new IP address.
Select: Select an existing IP address.
IPv4: To set an IPv4 address, select IPv4, and enter four numbers within the range of 0 to 255.
Example: XXX.XXX.XXX.XXX (X indicates a numeral)
IPv6: To set an IPv6 address, select IPv6, and enter eight hexadecimal alphanumeric characters within the range of 0 to FFFF. You can also use an abbreviated-format IPv6 address.

Example: YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Y indicates a hexadecimal digit)

Community

Enter a new community name or select an existing one.

You can use up to 180 alphanumeric characters excluding these symbols: (\ , / ; : * ? " < > | & % ^ )