Ports/Host Groups/iSCSI Targets window

Summary

Item

Description

Number of Ports

Total number of ports.

Host Groups / iSCSI Targets tab

This tab provides information about the host groups and iSCSI targets that are assigned to the logged-on user.

Item

Description

Port ID

Identifier of the port.

Clicking a port ID opens Port/Host Groups: Host Groups and Hosts tabs.

Type

Types of ports:

  • Fibre: Fibre Channel ports
  • iSCSI: iSCSI ports.

  • NAS Platform (User LU): LDEV used for storing the NAS user data. This value appears if the NAS module is installed.

  • NAS Platform (System LU): LDEV used for storing the NAS firmware system data. This value appears if the NAS module is installed.

Host Group Name / iSCSI Target Alias

Icons and names of the host group or iSCSI target alias.

Clicking a host group name or iSCSI target opens Port/Host Groups/iSCSI Targets: Hosts, LUNs, and Host Mode Options tabs.

Host Group ID / iSCSI Target ID1

Host group ID or iSCSI Target ID.

iSCSI Target Name

iSCSI Target name.

Host Mode

Host mode of the host group or iSCSI target.

Port Security

LUN security setting (Enabled or Disabled) on the port.

Number of Hosts

Number of hosts set to the relevant port.

Number of LUNs

Number of logical units.

Authentication

Information about the authentication. If the port is a Fibre Channel port, a hyphen appears.

  • Method: Authentication method that is CHAP, None, or Comply with Host Setting
  • Mutual CHAP: Mutual CHAP setting that is Enabled or Disabled
  • User Name
  • Number of Users

ALUA Used

Usage condition of ALUA.

Yes: ALUA is used.

No: ALUA is not used.

Asymmetric Access States

Asymmetric access states of the port. When using iSCSI, a hyphen (-) is displayed.

Active/Optimized: Access from the host is preferentially performed on this port.

Active/Non-Optimized: When the Active/Optimized port is disabled, access from the host is performed on this port.

T10 PI Mode

T10 PI attribute setting (Enabled or Disabled) on the port.

Resource Group Name (ID)

Resource group name and identifier of the host groups.

Virtual Storage Machine1

Model name and serial number of the virtual storage machine that has the port.

Create Host Groups

Opens the Create Host Groups window.

Create iSCSI Targets

Opens the Create iSCSI Targets window.

Add LUN Paths

Opens the Add LUN Paths window.

Add Hosts2

Opens the Add Hosts window.

Delete Host Groups2

Opens the Delete Host Groups window.

Delete iSCSI Targets2

Opens the Delete iSCSI Targets window.

Edit Host Groups2

Opens the Edit Host Groups window.

Edit iSCSI Targets2

Opens the Edit iSCSI Targets window.

Create Alternative LUN Paths2

Opens the Create Alternative LUN Paths window.

Add CHAP Users2

Opens the Add CHAP Users window.

Edit Asymmetric Access States 2

Opens the Edit Asymmetric Access States window. For details, see Global-Active Device User Guide.

Export2

Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

Notes:

  1. Does not appear by default. To display this item, change the Column Settings of the table option.
  2. Available when you click More Actions.

Hosts tab

This tab provides information about the HBA WWNs that are registered to the host groups or iSCSI targets assigned to the logged-on user.

Item

Description

Port ID

Identifier of the port.

Clicking a port ID opens Port/Host Groups: Host Groups and Hosts tabs.

Type

Types of ports:

  • Fibre: Fibre Channel ports
  • iSCSI: iSCSI ports

  • NAS Platform (User LU): LDEV used for storing the NAS user data. This value appears if the NAS module is installed.

  • NAS Platform (System LU): LDEV used for storing the NAS firmware system data. This value appears if the NAS module is installed.

HBA WWN / iSCSI name

HBA WWNs/ iSCSI names and their icons.

Host Name

Name of hosts.

Host Group Name

Name of the host group.

Number of iSCSI Targets

Number of iSCSI targets.

Add to Host Groups

Opens the Add to Host Groups window.

Edit Host

Opens the Edit Host window.

View Host Properties (iSCSI)

Opens the Host Properties window.

Remove Hosts (Fibre)1

Opens the Remove Hosts window.

Remove Hosts (iSCSI)1

Opens the Remove Hosts window.

Export1

Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

Notes:

  1. Available when you click More Actions.

Ports tab

This tab provides information about the ports assigned to the logged-on user.

Item

Description

Port ID

Identifier of the port. Clicking a port ID opens Port/Host Groups: Host Groups and Hosts tabs.

Type

Types of ports:

  • Fibre: Fibre Channel ports.
  • iSCSI: iSCSI ports.

  • NAS Platform (User LU): LDEV used for storing the NAS user data. This value appears if the NAS module is installed.

  • NAS Platform (System LU): LDEV used for storing the NAS firmware system data. This value appears if the NAS module is installed.

Adapter Type

Adapter type of the port.

iSCSI Virtual Port Mode

Information about the setting of the iSCSI virtual port mode:

  • Enabled: The iSCSI virtual port mode is enabled for the port.
  • Disabled: The iSCSI virtual port mode is disabled for the port.
  • - (hyphen): The port does not support the iSCSI virtual port mode.

WWN / iSCSI Name

WWN or iSCSI initiator name of the port.

IPv4

Information about the setting for IPv4:

  • IP Address: IP address for the port.
  • Subnet Mask*: Subnet mask for the port.
  • Default Gateway*: Default gateway for the port.
  • - (hyphen): The iSCSI virtual port mode is enabled for the port.

IPv6

Information about the setting for IPv6:

  • Mode: IPv6 setting (Enabled or Disabled) for the port.
  • Link Local Address: Link local address for the port.
  • Global Address: Global address for the port.
  • Global Address 2*: Global address for the port.
  • Subnet Prefix*: Subnet prefix for the port address.
  • Assigned Default Gateway*: Assigned default gateway address for the port.
  • - (hyphen): The iSCSI virtual port mode is enabled for the port.

Speed

Data transfer speed for the selected Fibre Channel port in Gbps (gigabit per second).

Valid speeds are 1, 2, 4, 8, 10, 16, or 32 Gbps. If Auto is set for the port speed, Auto (1, 2, 4, 8, 10, 16, or 32 Gbps) is displayed. The value enclosed in parentheses is defined by the storage system. A hyphen (-) appears in the parentheses when the connection is not in the linkup status.

Security

LUN security setting (Enabled or Disabled) on the port.

SFP Data Transfer Rate1

SFP data transfer rate.

A hyphen (-) is displayed for iSCSI ports.

Address (Loop ID)

Address of the port.

Fabric

Indicates whether a fabric switch is used.

Connection Type

Topology of the port.

TCP Port Number1

TCP port number. A hyphen (-) is displayed if the iSCSI virtual port mode is enabled for the port.

Ethernet MTU Size(Byte)

MTU size on Ethernet.

  • MTU: Specified MTU size
  • Linked MTU: Present MTU size for the data transfer
  • - (hyphen): The iSCSI virtual port mode is enabled for the port.

MAC Address1

MAC address.

Keep Alive Timer(sec.)1

Keep alive timer setting. A hyphen (-) is displayed if the iSCSI virtual port mode is enabled for the port.

Selective ACK1

Selective ACK setting (Enabled or Disabled) for the port. A hyphen (-) is displayed if the iSCSI virtual port mode is enabled for the port.

Delayed ACK1

Delayed ACK setting (Enabled or Disabled) for the port. A hyphen (-) is displayed if the iSCSI virtual port mode is enabled for the port.

Maximum Window Size (KB)1

Maximum window size setting. A hyphen (-) is displayed if the iSCSI virtual port mode is enabled for the port.

iSNS Server1

Information about the iSNS server.

  • Mode: iSNS server setting (Enabled or Disabled) for the port.
  • IP Address: IP address of the iSNS server.
  • TCP Port Number: TCP port number of the iSNS server.

VLAN1

Information about VLAN.

  • Tagging Mode: Tagging mode setting (Enabled or Disabled) for the port.
  • ID: VLAN identifier.
  • - (hyphen): The iSCSI virtual port mode is enabled for the port.

Authentication

Information about authentication.

  • CHAP User Name: CHAP user name of the port.
  • Used: Shows whether the CHAP authentication is using the CHAP user. If Yes appears, the CHAP user is used. If No appears, the CHAP user is not used.

T10 PI Mode

T10 PI attribute setting (Enabled or Disabled) on the port.

If the T10 PI mode is not supported, a hyphen (-) is displayed.

Resource Group Name (ID)

Resource group names and IDS of the ports.

Virtual Storage Machine1

Model name and serial number of the virtual storage machine that has the port.

Edit Ports

Opens the Edit Ports window.

Remove Port CHAP User

Opens the Remove Port CHAP User window.

Export

Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

Notes:

  1. This item does not appear by default. To display this item, change the Column Settings of the table option.

Login WWNs / iSCSI Names tab

Item

Description

Port ID

Identifier of the port.

Clicking a port ID opens Port/Host Groups: Host Groups and Hosts tabs.

Type

Types of ports:

  • Fibre: Fibre Channel ports.
  • iSCSI: iSCSI ports.

HBA WWN / iSCSI Name

HBA WWNs / iSCSI Names and their icons.

Host Name

Name of the host.

Host Group Name

Name of the host group.

Number of iSCSI Targets

Number of iSCSI targets.

Add to Host Groups

Opens the Add to Host Groups window.

Delete Login WWNs

Opens the Delete Login WWNs window.

Delete Login iSCSI Names

Opens the Delete Login iSCSI Names window.

View Login WWN Statuses1

Opens the View Login WWN Statuses window.

View Login iSCSI Name Statuses 1

Opens the View Login iSCSI Name Statuses window.

Export1

Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

Notes:

  1. Available when you click More Actions.

CHAP Users tab

Item

Description

Port ID

Identifier of the port.

Clicking a port ID opens Port/iSCSI Targets: iSCSI Targets, Hosts and CHAP Users tabs.

User Name

User name.

Clicking a user name opens the CHAP User Properties window.

Number of iSCSI Targets

Number of iSCSI Targets

Edit CHAP User

Opens the Edit CHAP User window.

Remove CHAP Users

Opens the Remove CHAP Users window.

Export

Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

Parent Topic
  • LUN Manager GUI reference

    The LUN Manager windows in Device Manager - Storage Navigator display the LUN information for the storage system and allow you to configure and manage LUNs.