Changing advanced system settings

You can change alert display settings and data acquisition settings in advanced system settings.

Log off and log in again after you have enabled or disabled an advanced system setting.

Before you begin

You must have the Storage Administrator (Initial Configuration) role to perform this task.

Procedure

Select the advanced system settings and click Enable.

Option	Description
Hide alert information	If you enable this advanced system setting, the Alert window in the Device Manager - Storage Navigator main window does not open.
Refresh forcibly after Apply	If you enable this advanced system setting, after settings changes are applied to the storage system, the configuration information for the storage system is always updated to the latest information.
Disable data polling	If you enable this advanced system setting, polling stops.
Disable retry of data updating	If you enable this advanced system setting, retry does not occur even if data cannot be acquired.
Enable Device Manager - Storage Navigator 2 All Function	If you enable this advanced system setting, the restrictions on login from Device Manager - Storage Navigator's login window are cleared, including the restrictions on the users who can log in and on the functions available after login. When enabling or disabling the advanced system setting, log in again.

Click Finish. The Confirm window opens.
In the Confirm window, check the settings and enter a task name in Task Name.
Click Apply. The task is now registered. If the Go to tasks window for status check box is checked, the Task window opens to display the status of the task.