Model

Local model.

Serial Number

Local serial number.

Model

Remote system's model.

• HUS VM (19)
• VSP Gx00 models and VSP Fx00 models (18)

  Specify the same value for VSP Gx00 models and VSP Fx00 models.

HUS VM (19) and VSP Gx00 models and VSP Fx00 models (18) can be selected only when System is selected for Connection Type.

If a value other than the above is specified, it is regarded as a storage system that will be supported in the future. In this case, in the Remote Connections window, the specified value will be enclosed by parentheses, such as (255), is displayed.

Serial Number

Last five or six digits of the remote system serial number, as follows:

• VSP G1x00, and VSP F1500: 1 to 99999 (5 digits)
• HUS VM: 200001 to 265535 (6 digits) (TC/UR only)
• VSP Gx00 models and VSP Fx00 models: 400001 to 499999 (6 digits)
• Future storage systems: 0 to 99999

(VSP Gx00 models and VSP Fx00 models) Note: When using virtual storage machine volumes, specify the serial number of the storage system. Do not specify the serial number of the virtual storage machine.

Path Group ID

Path group identifier (00 to FF). Up to 64 path group IDs can be registered per storage system. Path group IDs can be selected when Connection Type is System.

Minimum Number of Paths

Minimum number of remote paths.

• TC and TC-MF: The range is from 1 to 8, and the default is 1.
• UR and UR-MF: The minimum number is set to 1, regardless of the number entered.

Select Type

Select the port type.

• Fibre: Fibre Channel port
• iSCSI: iSCSI port

Port ID (for local storage systems)

Select the port identifier of the local storage system.

Virtual Port ID (for local storage systems)

Virtual port ID of the local storage system. Displayed when iSCSI is selected as the port type.

Port ID (for remote storage systems)

Select the port identifier of a remote storage system.

A hyphen (-) is displayed if the number of valid paths is greater than the minimum number of paths. Clicking the hyphen deletes the text box of the port for the local and remote storage systems.

IP address

Select the IP type (IPv4 or IPv6) for the port of the remote storage system to enter the IP address.

Displayed only when iSCSI is selected as the port type.

TCP Port Number

Enter the TCP port number of the remote storage system.

Displayed only when iSCSI is selected as the port type.

Add Paths

Opens a dialog box for creating additional paths (maximum of eight).

RIO MIH Time

Time limit between 10 and 100 seconds for the data-transfer operation to complete (15 is the default).

Roundtrip Time (msec.)

TC, TC-MF and GAD only.

Time limit between 1 and 500 milliseconds for data copy from P-VOL to S-VOL (1 is the default).