Parameter ranges for CCI options
The following table lists the valid parameter ranges for CCI options. For details, see the Command Control Interface Command Reference.
| Parameter | Valid values |
| Serial number |
400000 to 499999 |
| LDEV ID |
VSP G130: 0 to 2,047 VSP G350 and VSP F350: 0 to 16,383 VSP G370 and VSP F370: 0 to 32,767 VSP G700 and VSP F700: 0 to 49,151 VSP G900 and VSP F900: 0 to 65,279 |
| Pool ID |
VSP G130: 0 to 63 VSP G350 and VSP F350: 0 to 63 VSP G370 and VSP F370: 0 to 63 VSP G700 and VSP F700: 0 to 63 VSP G900 and VSP F900: 0 to 127 |
| Port number |
VSP G130: CLx-A (x: 1 to 8) VSP G350 and VSP F350: CLx-y (x: 1 to 8, y: A to B) VSP G370 and VSP F370: CLx-y (x: 1 to 8, y: A to B) VSP G700 and VSP F700: CLx-y (x: 1 to 8, y: A to H) VSP G900 and VSP F900: CLx-y (x: 1 to 8, y: A to M, except I) |
| LU number | 0 to 2,047 |
| Resource group ID | 0 to 1,023 |
| Parity group ID |
gno: 1 to 52 sgno: 1 to 32 |
| Drive location | 0-0 to 23-59 (Maximum values using DB60. The maximum values might vary depending on your operation environment.) |
| iSCSI virtual port ID | 0 to 15 |
| SSID | 0000 to FFFE |
| Tiering policy ID | 0 to 31 |
| Loop ID for port | 0x01 to 0xEF |
| VLAN ID | 1 to 4094 |
| CU # |
VSP G130: 0 to 07 VSP G350 and VSP F350: 0 to 3F VSP G370 and VSP F370: 0 to 7F VSP G700 and VSP F700: 0 to BF VSP G900 and VSP F900: 0 to FE |
| DB number | 0 to 47 |
| LDEV ID used in a virtual storage machine | See LDEV ID in this table. |
| Virtual port number | See Port number in this table. |
| Host group ID or iSCSI target ID | 0 to 254 |
| SSID for LDEV in a virtual storage machine | See SSID in this table. |