Local Replication window

Use this window to perform the following tasks:

  • Viewing SI pairs, HTI pairs, and CTG information for local replication.

  • Creating pairs.

  • Splitting pairs.

  • Resynchronizing pairs.

  • Deleting pairs.

This window contains the following section and tabs:

  • Summary section
  • SI Pairs tab
  • Consistency Groups tab
  • Snapshot Groups tab

Summary section

Item

Description

Number of Pairs

The number of pairs for each local replication software type.

Snapshot Estimated Manageable Capacity*

The estimated HTI pair capacity. The icon appears when the estimated capacity is less than:

  • VSP G1x00 and VSP F1500: 128 TB
  • VSP G130, VSP G350, VSP G370, VSP G700, VSP G900, VSP F350, VSP F370, VSP F700, VSP F900: 5% of the capacity supported by the installed shared memory

For more information about snapshot estimated manageable capacity, see the Thin Image User Guide.

Number of Consistency Groups

The number of consistency groups (CTGs) that have a status other than Free, and the maximum number of CTGs allowed.

Number of Snapshot Groups

The number of snapshot groups that are in use, and the maximum number of snapshot groups allowed.

Number of Pair Tables

The number of pair tables in use, and the maximum number of pair tables allowed.

Values:

  • SI/Volume Migration: SI, Volume Migration
  • TI: HTI

Number of Differential Tables

The number of differential tables in use, and the maximum number of differential tables allowed.

Because differential tables are not used for all operations, the number of differential tables does not change when you execute the following operations:

  • Thin Image pair operations.
  • SI pair operations for a DP-VOL that exceeds 4 TB.

*Snapshot Estimated Manageable Capacity is an estimation of Thin Image pair capacity that is calculated by subtracting shared memory used by Thin Image pools and Thin Image pairs from the shared memory capacity. Snapshot Estimated Manageable Capacity is only a reference estimation and does not guarantee that the space is available. The Snapshot Estimated Manageable Capacity value changes when Thin Image pool volumes or Thin Image pairs are added or deleted.

SI Pairs tab

This tab of the Local Replication window shows the SI pairs for which the P-VOLs or S-VOLs are allocated to you.

The following table describes the items on this tab.

Item

Description

Primary Volume

The P-VOL information.

Values:

  • LDEV ID: The P-VOL's LDEV identifier.

    Click to open the LDEV Properties window, which contains additional information for the selected replica LDEV.

  • LDEV Name: The P-VOL's LDEV name.
  • Port ID: The P-VOL's port identifier.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • Host Group Name / iSCSI Target Alias: The P-VOL's host group name and ID or iSCSI target alias and ID.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • iSCSI Target Name: The P-VOL's iSCSI target name.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • LUN ID: The P-VOL's LUN identifier.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • Provisioning Type*: The P-VOL's provisioning type, which can be one of the following:
    • Basic: Internal volume
    • DP: DP-VOL
    • External: External volume
  • Attribute*: The P-VOL's attribute.
  • Capacity*: The P-VOL's volume capacity.
  • CLPR*: The P-VOL's CLPR ID.
  • Encryption*: The P-VOL's encryption information.
    • Enabled: Encryption is enabled for the parity group to which the P-VOL's LDEV belongs, or the P-VOL is a V-VOL associated with a pool in which a pool volume has encryption enabled.
    • Disabled: Encryption is disabled for the parity group to which the P-VOL's LDEV belongs, or the P-VOL is a V-VOL associated with a pool in which a pool volume has encryption disabled.
    • Mixed: The pool to which the P-VOL's LDEV belongs contains two or more of the following:
      • Volume for which encryption is enabled
      • Volume for which encryption is disabled
      • External volume

      Note: Data encryption is not ensured in an LDEV with Mixed encryption status.

    A hyphen (-) is displayed if the P-VOL is an external volume or migration volume. When the P-VOL is a DP-VOL, the pool to which the P-VOL's LDEV belongs is an external volume or blocked.

  • Capacity Saving*: Information about the P-VOL's capacity saving function.
    • Compression: The compression function is used.
    • Deduplication and Compression: The deduplication function and the compression function are used.
    • Disabled: The capacity saving function is not used.
  • T10 PI*: The P-VOL's T10 PI attribute information.
    • Enabled: The P-VOL's T10 PI attribute is enabled.
    • Disabled: The P-VOL's T10 PI attribute is disabled.
  • Virtual Storage Machine*: The model type and serial number of the virtual storage machine to which the P-VOL belongs.
  • Virtual LDEV ID*: The identification number of the P-VOL's virtual LDEV. If no virtual LDEV ID is assigned, a blank is displayed.
  • Virtual Device Name*: The name of the P-VOL's virtual device, in a combined format of virtual emulation type, number of virtual LUSE volumes, and virtual CVS attribute. Each of these three items is displayed only if it is specified. If none of them are specified, a blank is displayed. "CVS" is displayed at the end of the device name, if the virtual CVS attribute is specified.
  • Virtual SSID*: The virtual SSID of the P-VOL. If no virtual SSID is specified, a blank is displayed.

Copy Type

The pair type.

Values:

  • SI-L1: SI L1
  • SI-L2: SI L2

Snapshot Group

HTI only.

The snapshot group name.

If you have not assigned the pair to a snapshot group, a blank is displayed.

Status

The status of the pair.

For SI status descriptions, see Device Manager - Storage Navigator pair status names and descriptions.

For SIz status descriptions, see the ShadowImage for Mainframe User Guide.

Secondary Volume

The S-VOL information.

Values:

  • LDEV ID: The S-VOL's LDEV identifier. Click the LDEV ID to open the LDEV Properties window, which contains additional information for the selected LDEV.
  • LDEV Name: The S-VOL's LDEV name
  • Port ID: The name of the S-VOL LUN path.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • Port Name: The S-VOL's port name.

    HTI only.

  • Host Group Name / iSCSI Target Alias: The S-VOL's host group name and ID or iSCSI target alias and ID.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • iSCSI Target Name: The S-VOL's iSCSI target name.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • LUN ID: The S-VOL's LUN identifier.

    For SIz pairs, a hyphen (-) is displayed. For SI pairs with an undefined path, a blank is displayed.

  • Provisioning Type*: The S-VOL's provisioning type, which can be one of the following:
    • Basic: Internal volume
    • DP: DP-VOL
    • External: External volume
  • Attribute*: The S-VOL's attribute.
  • Capacity*: The S-VOL's capacity
  • CLPR*: The S-VOL's CLPR ID
  • Encryption*: The S-VOL's encryption information.
    • Enabled: Encryption is enabled for the parity group to which the S-VOL's LDEV belongs, or the S-VOL is a V-VOL associated with a pool in which a pool volume has encryption enabled.
    • Disabled: Encryption is disabled for the parity group to which the S-VOL's LDEV belongs, or the S-VOL is a V-VOL associated with a pool in which a pool volume has encryption disabled.
    • Mixed: The pool to which the S-VOL's LDEV belongs contains two or more of the following:
      • Volume for which encryption is enabled
      • Volume for which encryption is disabled
      • External volume

      Note: Data encryption is not ensured in an LDEV with Mixed encryption status.

    A hyphen (-) is displayed if the S-VOL is an external volume or migration volume. When the S-VOL is a DP-VOL, the pool to which S-VOL's LDEV belongs is an external volume or blocked.

  • Capacity Saving*: Information about the S-VOL's capacity saving function.
    • Compression: The compression function is used.
    • Deduplication and Compression: The deduplication function and the compression function are used.
    • Disabled: The capacity saving function is not used.
  • T10 PI*: The S-VOL's T10 PI attribute information.
    • Enabled: The S-VOL's T10 PI attribute is enabled.
    • Disabled: The S-VOL's T10 PI attribute is disabled.

    For SIz pairs, a hyphen (-) is displayed.

  • Virtual Storage Machine*: The model type and serial number of the virtual storage machine to which the S-VOL belongs.
  • Virtual LDEV ID*: The identification number of the S-VOL's virtual LDEV. If no virtual LDEV ID is assigned, a blank is displayed.
  • Virtual Device Name*: The name of the S-VOL's virtual device, in a combined format of virtual emulation type, number of virtual LUSE volumes, and virtual CVS attribute. Each of these three items is displayed only if it is specified. If none of them are specified, a blank is displayed. "CVS" is displayed at the end of the device name, if the virtual CVS attribute is specified.
  • Virtual SSID*: The virtual SSID of the S-VOL. If no virtual SSID is specified, a blank is displayed.

Snapshot Date

HTI only.

The date and time the snapshot was acquired.

If you have not acquired a snapshot, a blank is displayed.

Pool Name (ID)

HTI only.

The pool name and identification number.

If you have not set a pool name, a blank is displayed.

Copy Pace*

The system option that determines the rate at which you want the storage system to copy data.

Values:

  • Slower: Improved host I/O performance but slower processing speed.
  • Medium: Average processing speed and host I/O performance.
  • Faster: Faster processing speed but slower host server I/O performance.

For HTI pairs, a hyphen is displayed.

CTG ID*

The identifier of the consistency group to which the SI pair is assigned.

Mirror Unit*

The mirror unit number.

Topology ID

The LDEV's topology identifier. This item shows the tier of a pair with the mirror unit, which is expressed in the following format:

LDEV ID of the volume (mirror units)

Example: 00.00.00 (MU0-MU1)

Create SI Pairs button

Click to open the Create SI Pairs wizard.

Create TI Pairs button

Click to open the Create TI Pairs wizard.

Split Pairs button

Click to open the Split Pairs wizard.

Resync Pairs button

Click to open the Resync Pairs wizard.

More Actions

Click to show options.

Options:

  • View Pair Synchronization Rate: Click to open the View Pair Synchronization Rate window.
  • View Pair Properties: Click to open the View Pair Properties window.
  • Suspend Pairs: Click to open the Suspend Pairs window.
  • Delete Pairs: Click to open the Delete Pairs window.
  • Export: Click to open a dialog for downloading table information to a tab-separated values (TSV) file.

* These items are not shown in the table by default. You must add them using the Column Settings window.

For more information about how to add items to a table using this window, see the System Administrator Guide.

TI Root Volumes tab

Use this tab of the Local Replication window to view HTI pair information for local replication. Only HTI pairs for which a P-VOL is assigned to each user are displayed.

The following table describes the items on this tab.

Item

Description

LDEV ID

The P-VOL's LDEV identifier.

Click to open the TI Pairs window.

Use this window to search for P-VOL information.

LDEV Name

The P-VOL's LDEV name.

Port ID

The port name of the P-VOL. If the path is not defined, a blank is displayed.

Host Group Name / iSCSI Target Alias

The P-VOL's host group name and ID or iSCSI target alias and ID. If the path is not defined, a blank is displayed.

iSCSI Target Name

The P-VOL's iSCSI target name. If the path is not defined, a blank is displayed.

LUN ID

The LUN ID of the P-VOL LDEV's LUN path. If the path is not defined, a blank is displayed.

Attribute*

The P-VOL's attribute.

Capacity*

The P-VOL's capacity.

CLPR*

The P-VOL's CLPR ID.

Encryption*

The P-VOL's encryption information.

  • Enabled: Encryption is enabled for the parity group to which the P-VOL's LDEV belongs, or the P-VOL is a V-VOL associated with a pool in which a pool volume has encryption enabled.
  • Disabled: Encryption is disabled for the parity group to which the P-VOL's LDEV belongs, or the P-VOL is a V-VOL associated with a pool in which a pool volume has encryption disabled.
  • Mixed: The pool to which the P-VOL's LDEV belongs contains two or more of the following:
    • Volume for which encryption is enabled
    • Volume for which encryption is disabled
    • External volume

    Note: Data encryption is not ensured in an LDEV with Mixed encryption status.

A hyphen (-) is displayed if the P-VOL is an external volume or migration volume. When the P-VOL is a DP-VOL, the pool to which a P-VOL's LDEV belongs is an external volume or blocked.

Capacity Saving*

Information about the P-VOL's capacity saving function.

  • Compression: The compression function is used.
  • Deduplication and Compression: The deduplication function and the compression function are used.
  • Disabled: The capacity saving function is not used.

Pool Name (ID)*

The P-VOL's pool name and identifier.

Number of Snapshot Data

The number of P-VOL snapshot data.

Number of Pairs in PSUE status

The number of P-VOL pairs in PSUE status.

Cascade

Indicates whether cascade pairs can be created.

  • Enabled: Cascade pairs can be created.
  • Disabled: Cascade pairs cannot be created.

T10 PI*

The P-VOL's T10 PI attribute information.

  • Enabled: The P-VOL's T10 PI attribute is enabled.
  • Disabled: The P-VOL's T10 PI attribute is disabled.

Virtual Storage Machine*

The Virtual Storage Machine information.

Values:

  • Model/Serial Number: The model type and serial number of the virtual storage machine to which the P-VOL belongs.
  • LDEV ID: The identification number of the P-VOL's virtual LDEV. If no virtual LDEV ID is assigned, a blank is displayed.
  • Device Name: The name of the P-VOL's virtual device, in a combined format of virtual emulation type, number of virtual LUSE volumes, and virtual CVS attribute. Each of these three items is displayed only if it is specified. If none of them are specified, a blank is displayed. "CVS" is displayed at the end of the device name, if the virtual CVS attribute is specified.
  • SSID: The virtual SSID of the P-VOL. If no virtual SSID is specified, a blank is displayed.

Create TI Pairs button

Click to open the Create TI Pairs wizard.

Operate TI Pairs button

Click to open the TI Pairs wizard.

View Pair Synchronization Rate button

Click to open the View Pair Synchronization Rate window.

More Actions

Click to show options.

Options:

  • View Pair Properties: Click to open the View Pair Properties window.
  • View LDEV Properties: Click to open the View LDEV Properties window.
  • Split Pairs: Click to open the Split Pairs window.
  • Resync Pairs: Click to open the Resync Pairs window.
  • Assign Secondary Volumes: Click to open the Assign Secondary Volumes window.
  • Remove Secondary Volumes: Click to open the Remove Secondary Volumes window.
  • Delete Pairs: Click to open the Delete Pairs window.
  • Export: Click to open a dialog for downloading table information to a tab-separated values (TSV) file.

* These items are not shown in the table by default. You must add them using the Column Settings window.

For more information about how to add items to a table using this window, see the System Administrator Guide.

Consistency Groups tab

Use this tab of the Local Replication window to perform the following tasks:

  • View CTG information for local replication.

For more information about this tab, select In-System Replication to navigate to the desired software and information.

The following table describes the items on this tab of the Local Replication window.

Item

Description

CTG ID

The SI pair's CTG identification number.

Click to open the Consistency Group Properties window.

Status

The consistency group's status.

Values:

  • SI Used: The CTG is being used by SI.
  • TI Used: HTI is using the CTG.
  • Free: The CTG is not being used and is not reserved.
  • (Changing...): The status is in the process of changing.

Number of Pairs

The number of pairs assigned to the CTG.

Export button

Click to open a dialog for downloading table information to a tab-separated values (TSV) file.

Snapshot Groups tab

This tab of the Local Replication window shows your snapshot groups.

The following table describes the items on this tab of the Local Replication window.

Item

Description

Snapshot Group

The snapshot group name.

Click to open the HTI pairs window.

Number of Pairs

The number of pairs currently used by the snapshot group.

Create TI Pairs button

Click to open the Create TI Pairs window.

Operate TI Pairs button

Click to open the TI Pairs window.

View Pair Synchronization Rate button

Click to open the View Pair Synchronization Rate window.

More Actions

Click to show options.

Options:

  • Split Pairs: Click to open the Split Pairs window.
  • Resync Pairs: Click to open the Resync Pairs window.
  • Assign Secondary Volumes: Click to open the Assign Secondary Volumes window.
  • Remove Secondary Volumes: Click to open the Remove Secondary Volumes window.
  • Delete Pairs: Click to open the Delete Pairs window.
  • Export: Click to open a dialog for downloading table information to a tab-separated values (TSV) file.
Parent Topic