Accessing the Alert Notifications window

Since the other topics (SNMP v1, v2c , and v3) talk about how to configure in details, this high level (useless) topic should either be removed or modified to talk about how to access the config window. The edits below show the latter.

You can configure SNMP traps using the Alert Notifications window in the maintenance utility.

Before you begin

You must have the Storage Administrator (Initial Configuration) role to perform this task.

Procedure

  1. Display the Device Manager - Storage Navigator main window.

  2. From the Maintenance Utility menu, select Alert Notifications.

  3. In the Alert Notifications window, click Set Up.

  4. In the Set Up Alert Notifications window, select the SNMP tab.

  5. For Notification Alert, select one of the following:

    • All (Sends alerts of all SIMs.)
    • Host Report (Sends alerts only of SIMs that report to hosts. Alert destinations are common to Syslog, SNMP, and Email.)

  6. Confirm the settings, and then click Apply.

Parent Topic
  • Using SNMP

    By using the maintenance utility, you can manage alert settings, SNMP trap notification, SNMP request authentication, test SNMP trap reports.