Changing DP-VOL settings
The Storage Administrator (Provisioning) role is required to perform this task.
Before registering a DP-VOL, you may need to change the DP-VOL settings.
In the Selected LDEVs table in the Create LDEVs window, select an LDEV, then click Change LDEV Settings.
In the Change LDEV Settings window, you can change the setting of LDEV Name, Initial LDEV ID, or MP Unit.
If you change LDEV Name, specify the prefix characters and the initial number for this LDEV.
If you change Initial LDEV ID, specify the number of LDKC, CU, DEV, and Interval. To check used LDEVs, click View LDEV IDs to confirm the used LDEVs. The View LDEV IDs window opens.
If you change MP Unit, click the list and specify the MP unit ID. If the specific MP unit is specified, select the MP unit ID. If any MP unit is specified, click Auto.
Change the settings, then click OK.
In the Create LDEVs window, click Finish.
In the Confirm window, click Apply.
The setting is changed.
If Go to tasks window for status is checked, the Tasks window opens.