The configured values are required to use SNMP agents. Make sure to document the information, because the settings will be cleared when the service processor is replaced.Setting storage system information
This topic explains how to set the name, contact information, and location of the storage system.
The configured values are required to use SNMP agents. Make sure to document the information, because the settings will be cleared when the service processor is replaced.
You can change more than one parameter, multiple times, but change only one at a time. Wait until the current task finishes before starting a new task. If you apply a setting (a new task) before the current task finishes, only the new task will be applied, so the result might be different from what you expected.
To set storage system information:
In the Storage System tree, select the storage system.
Open the window in one of the following ways:
Click .
From Settings, click Environmental Settings > Edit Storage System.
Enter the items that you want to set.
You can enter up to 180 alphanumeric characters excluding several symbols (\ , / ; : * ? " < > | & % ^). Avoid using a space at the beginning and the end.
Click Finish. The Confirm window opens.
In the Confirm window, check the settings and enter a task name in Task Name.
Click Apply. The task is registered. If the Go to tasks window for status check box is checked, the Task window opens.
Related Topics