Deleting TrueCopy remote connections
You can delete the TrueCopy relationship between the primary and secondary systems. This is done by deleting remote connections.
Prerequisite information
All TC pairs must be deleted before removing the connection.
When the remote connection is deleted, all remote paths are deleted.
Deleting the TC relationship with a specific secondary system does not affect TC operations between other primary systems and the secondary system.
After a secondary system is deleted, you can reconfigure the remote path to then connect another secondary system to the primary system. You can also delete the remote connection and reconfigure the primary system ports to provide additional host channels for the primary system.
To delete the TrueCopy relationship
In Hitachi Command Suite:
On the Resources tab, expand the Storage Systems tree, right-click the target storage system and click Remote Connections.
In Device Manager - Storage Navigator
Click Storage Systems, and then expand the Storage Systems tree.
In the Storage Systems tree, click Replication > Remote Connections.
In the Remote Connections window, click the Connections (To) tab.
In the Connections (To) tab, select the remote connection to be deleted.
From the Actions menu, click Remote Connections > Remove Remote Connection.
In the Remove Remote Connection window, from the Selected Remote Connection table, select the connection to be removed.
(You can review information about the connection by clicking Detail.)
Click Apply.