Deleting remote paths
You can delete remote paths from the primary or secondary system.
Prerequisite information
Before deleting remote paths, make sure that the remaining number of remote paths after deletion will be equal to or greater than the minimum number of paths setting. The View Remote Connection Properties window displays the minimum number of paths setting and the current number of remote paths. The delete path operation will fail if the remaining number of paths after deletion is less than the minimum number of paths.
The primary system administrator can delete remote paths running from the primary system's port to the secondary system's port. The secondary system administrator can delete remote paths running from the secondary system's port to the primary system's port.
To delete a remote path
Open the Remote Connections window:
In Hitachi Command Suite: On the Resources tab, expand the Storage Systems tree, right-click the target storage system, and click Remote Connections.
In Device Manager - Storage Navigator: In the Storage System tree, click Replication > Remote Connections.
In the Remote Connections window, click the Connections (To) tab, and then select the secondary system with the remote path you want to delete.
From the Actions menu, click Remote Connections > Remove Remote Paths.
In the Remove Remote Paths window, in the Remote Paths box, check the Remove box or boxes for the remote paths to be deleted.
Click Finish.
In the Confirm window, review the settings and enter a task name in the Task Name box.
Click Apply to save your settings to the system.