Pool Name (ID)

Displays the pool name and pool ID.

Pool Type

Displays the pool type.

For a Dynamic Provisioning pool, DP is displayed.

For a Dynamic Tiering pool, DT is displayed.

For a Thin Image pool, TI is displayed.

Number of V-VOLs

Displays the number of V-VOLs associated with the pool, and the maximum number of V-VOLs that can be associated with the pool.

If you select a Dynamic Provisioning, Dynamic Tiering pool, this item appears.

Number of Primary VOLs

Displays the number of primary volumes of Thin Image pairs that are associated with the pool.

If you select a Thin Image pool, this item appears.

Number of Pool VOLs

Displays the number of pool-VOLs set for the pool, and the maximum number of pool-VOLs that can be set for the pool.

Pool Management Task (Status/Progress)

Displays the status and progress ratio of the pool management task being performed to the pool, and average progress ratio of the each V-VOL in the pool.

Waiting for Rebalance: The rebalance process is being waited.

Rebalancing: The rebalance process is being performed.

Waiting for Relocation: The tier relocation process is being waited.

Relocating: The tier relocation process is being performed.

Waiting for Shrink: The pool shrinking process is being waited.

Shrinking: The pool shrinking process is being performed.

Blank:The pool management task is not being performed to the pool.

The following values that are displayed in the Virtual Volume table or in the Primary Volume table may not correspond with the value displayed for this item. This is because the progress of the pool management task is calculated after the progress of each V-VOL displayed in the Virtual Volume table or the Primary Volume table is calculated.

• Pool Management Task - Status

• Pool Management Task - Progress(%)

For details about the tier relocation, see the tier relocation log file.

Relocation Result

Displays the status of the tier relocation processing.

In Progress: The status of Pool Management Task is Waiting for Relocation or Relocating.

Completed: The tier relocation operation is not in progress, or the tier relocation is complete.

Uncompleted (n% relocated): The tier relocation is suspended at the indicated percentage progression.

Hyphen (-): The pool is not a Dynamic Tiering pool.

Capacity

• Used/Total: Displays the used and total pool capacity. If the pool consists of multiple pool-VOLs, the sum of its capacities is displayed in the Total field.

• Free: Displays the free and formatted pool capacity. If the pool consists of multiple pool-VOLs, the sum of its capacities is displayed in the Total field.

Tier Management

If Dynamic Tiering is enabled, Auto or Manual of performance monitoring and tier relocation is displayed. If Dynamic Tiering is disabled, a hyphen (-) is displayed.

Monitoring Mode

Displays the monitoring mode that is set for the pool. If the continuous mode is enabled, Continuous Mode is displayed. If the period mode is enabled, Period Mode is displayed. If Dynamic Tiering is disabled, a hyphen (-) is displayed.

Monitoring Status

Displays the status of pool monitoring.

If the monitoring is being performed, In Progress is displayed. A hyphen (-) is displayed other than this case.

Relocation Speed/Actual

Displays the tier relocation speed: 1(Slowest), 2(Slower), 3(Standard), 4(Faster), or 5(Fastest). Actual displays the measured value of the tier relocation capacity per second.

LDEV ID

Displays the LDEV identifier, which is the combination of LDKC, CU, and LDEV.

LDEV Name

Displays the LDEV name.

Pool Management Task

• Status: Displays the pool management task being performed to the pool.

Waiting for Rebalance: The rebalance process is being waited.

Rebalancing: The rebalance process is being performed.

Waiting for Relocation: The tier relocation process is being waited.

Relocating: The tier relocation process is being performed.

Waiting for Shrink: The pool shrinking process is being waited.

Shrinking: The pool shrinking process is being performed.

Blank:The pool management task is not being performed to the pool.

• Progress(%): Displays V-VOL progress percentage (%) of the pool management task being performed. A hyphen (-) is displayed when the pool management task is not performed.

V-VOL Management Task

• Status: Displays the V-VOL management task being performed to V-VOL.

Reclaiming Zero Pages: The zero page reclaim processing that is being performed.

Waiting for Zero Page Reclaiming: The zero page reclaim processing

Blank:The V-VOL management task is not being performed to V-VOL.

• Progress(%): Displays the progress percentages (%) of the V-VOL management task being performed. A hyphen (-) is displayed when the V-VOL management task is not performed.

Capacity

• Total: Displays the V-VOL capacity.

• Used: Displays the V-VOL used capacity.

The displayed value of Total might be larger than the displayed value of Used due to following reasons:

• Used displays the used V-VOL capacity which is rounded up on each page.

• Used(%): Displays the V-VOL usage ratio.

Tiering Policy

Displays the tiering policy name and identifier.

All(0): Policy in which all tiers of the pool are used.

Level1(1) - Level5(5):Policy selected from levels 1 to 5 is set to the V-VOL.

Level6(6) - Level31(31): Policy defined by the user and set to the V-VOL.

Hyphen (-): V-VOL is not the V-VOL of Dynamic Tiering V-VOL.

New Page Assignment Tier

Displays the new page assigned tier.

High: High is set to V-VOL.

Middle: Middle is set to V-VOL.

Low: Low is set to V-VOL.

Hyphen (-): V-VOL is not the Dynamic Tiering V-VOL.

Tier Relocation

Displays whether tier relocation is set to enable or disable. If the Dynamic Tiering V-VOL is not used, a hyphen (-) is displayed.

Relocation Priority

Displays the relocation priority.

Prioritized: The priority is set to V-VOL.

Blank: The priority is not set to V-VOL.

Hyphen (-): V-VOL is not the Dynamic Tiering V-VOL or the tier relocation function is disabled.

Attribute

Displays the attribute of the LDEV.

Hyphen (-): Volume in which the attribute is not defined.

Virtual Storage Machine

Information about the virtual storage machine.

• Model / Serial Number: Model name and serial number of the virtual storage machine that has LDEV.

• LDEV ID: Virtual LDEV ID. If a Virtual LDEV ID is not assigned to LDEV, this column is blank.

• Device Name: Virtual device name, which is a combination of the virtual emulation type, virtual LUSE volume number, and the virtual CVS attribute. Values of the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute appear only for items that have been set. This column is blank when the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute are not set. If the virtual CVS attribute is set, CVS is attached as the suffix to the device name.

• SSID: Virtual SSID. If Virtual SSID is not set for LDEV, this column is blank.

LDEV ID

Displays the LDEV identifier which is the combination of LDKC, CU, and LDEV.

LDEV Name

Displays the LDEV name.

Pool Management Task

• Status: Displays the pool management task being performed to the pool.

Waiting for Rebalance: The rebalance process is being waited.

Rebalancing: The rebalance process is being performed.

Waiting for Shrink: The pool shrinking process is being waited.

Shrinking: The pool shrinking process is being performed.

Blank:The pool management task is not being performed to the pool.

• Progress (%): Displays a progress percentage (%) of a pool management task being performed on each primary volume. A hyphen (-) is displayed when the pool management task is not performed.

Used Pool Capacity

Displays the used pool capacity.

Pool Usage(%)

Displays the pool usage ratio.

Virtual Storage Machine

Information about the virtual storage machine.

• Model / Serial Number: Model name and serial number of the virtual storage machine that has LDEV.

• LDEV ID: Virtual LDEV ID. If a Virtual LDEV ID is not assigned to LDEV, this column is blank.

• Device Name: Virtual device name, which is a combination of the virtual emulation type, virtual LUSE volume number, and the virtual CVS attribute. Values of the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute appear only for items that have been set. This column is blank when the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute are not set. If the virtual CVS attribute is set, CVS is attached as the suffix to the device name.

• SSID: Virtual SSID. If Virtual SSID is not set for LDEV, this column is blank.