Removing LDEVs from registering tasks

The LDEVs that are shown in the Selected LDEVs table in the Create LDEVs window are those that are set to be registered and created. You can choose to not register the LDEV by removing the LDEV from the registering task.

1. Navigate to the Pools window.

In Hitachi Command Suite:

1. On the Resources tab, click Storage Systems, and then expand the storage system tree.

2. Expand the target storage system, right-click DP Pools, and then select System GUI.

In Device Manager - Storage Navigator:

1. In the Explorer pane, click Storage Systems, and then expand the storage system tree.

2. Click Pools.

2. In the Pools window, in the Pools tab, click Create LDEVs.

3. In the Create LDEVs window, in the Selected LDEVs table, complete the following and then click Finish:

1. Select the check box for the LDEV you want to remove from the registering task and click Remove.

2. In the warning message that appears, click OK to confirm that you want to remove the selected LDEV.

4. In the Confirm window, complete the following.

• Confirm the settings.

• Enter a name for your task in Task Name.

• (Optional) Select Go to tasks window for status if you want the Tasks window to open after you click Apply.

5. Click Apply.

The LDEV is removed from the registering task. The LDEV is not registered and created.

If the Go to tasks window for status check box was selected, the Tasks window appears.

© 2015 Hitachi, Ltd. All rights reserved.