Enabling/disabling tier relocation of a DP-VOL

The Storage Administrator (Provisioning) role is required to perform this task.

You can enable or disable tier relocation of individual DP-VOLs or on all DP-VOLs.

DP-VOLs on which tier relocation is disabled are excluded from the targets for the tier range calculation, and are not reflected in the performance information of pools. If tier relocation is disabled on all DP-VOLs in a pool, performance information of a pool is unavailable in the View Tier Properties window.

1. Perform one of following to display the Edit LDEVs window.

For Hitachi Command Suite:

• On the Resource tab, expand the Storage Systems tree. Right click Volumes of the target storage system, then select System GUI. On the LDEVs tab, select Edit LDEVs.

For the Logical Devices window in Storage Navigator:

• Expand the Storage Systems tree and select Logical Devices. On the LDEVs tab, select the LDEV to be edited, click Edit LDEVs.

• Expand the Storage Systems tree and select Logical Devices. Click Actions > Logical Device > Edit LDEVs to open the window.

For the Pools window in Storage Navigator:

• Expand the Storage Systems tree and select Pools. On the Virtual Volumes tab, select the LDEV to be edited, click More Actions, then Edit LDEVs.

• Expand the Storage Systems tree and select Pools. On the Virtual Volumes tab, click Actions > Logical Device > Edit LDEVs to open the window.

2. In the Edit LDEVs window, check tier relocation and select Enable or Disable.

Enable allows tier relocation to be performed to the DP-VOL.

Disable do not allow tier relocation to be performed on the DP-VOL in the case of both automatic and manual tier relocation.

3. Click Finish.

4. In the Confirm window, confirm the settings, in Task Name type a unique name for this task or accept the default, then click Apply.

If Go to tasks window for status is checked, the Tasks window opens.

© 2015 Hitachi, Ltd. All rights reserved.