Edit Host Groups window

Use this window to edit host group properties for selected host groups. Properties include host group name, host mode, or host mode options.


Host Group name	Specify the name of the host group. Host group name takes up to 64 single-byte ASCII characters (alpha-numerals and symbols). You cannot use the following symbols: \ / : , ; * ? " < > \| You cannot use a space character at the beginning or end of the host group name.
Host Mode	Select the host mode from the list.

Item

Description

Host Group name

Specify the name of the host group.

Host group name takes up to 64 single-byte ASCII characters (alpha-numerals and symbols).

You cannot use the following symbols: \ / : , ; * ? " < > |

You cannot use a space character at the beginning or end of the host group name.

Host Mode

Select the host mode from the list.

Host Mode Options table

To set the host mode option, select a host mode option, then click Enable. If you do not need a host mode option, select an unnecessary host mode option, then click Disable.


Item	Description
Mode No.	Number identifier of the host mode option.
Option Description	Description of the host mode option.
Status	Indicates the current status setting (Enabled or Disabled) of the host mode option on this host group.
Enable	Enables the host mode option.
Disable	Disables the host mode option.

The operation of the Edit iSCSI targets cannot be completed if specified multiple iSCSI targets in that different host modes are defined, and if one of iSCSI target is connected to the port.