Edit Storage System

Allows editing of the storage system name, contact, and location.

Storage System Name

Device name of the storage system.

Contact

Contact information such as personnel and telephone number where you can inquire about the storage system.

Location

Location of the connected storage system.

Storage System Type

Model type of the storage system.

Serial Number

Serial number of the storage system.

Total Cache Size

Total size of the cache memory in the storage system.

Software Version

This item displays the version of the software.

• Main: Version of the firmware installed in the connected storage system

• Storage Navigator : Version of the Device Manager - Storage Navigator

• RMI Server: Version of the RMI server installed in the service processor

IPv4 Address

IPv4 address of the storage system

• CTL1: Displays IP address of the controller board 1.

• CTL2: Displays IP address of the controller board 2.

A hyphen (-) displays if the IPv4 address is not set.

IPv6 Address

IPv6 address of the storage system

• CTL1: Displays IP address of the controller board 1.

• CTL2: Displays IP address of the controller board 2.

A hyphen (-) displays if the IPv4 address is not set.

Internal / External

This item switches the displayed items.

• Total: Displays information on both the internal volumes and the external volumes.

• Internal Only: Displays information on only the internal volumes.

• External Only: Displays information on only the external volumes.

Capacity Unit

This item switches the displayed units of the capacity.

• Appropriate: Displays the capacity in appropriate unit depending on the capacity of each item.

• TB/GB/MB: Displays the capacity of the specified unit.

Physical Summary

This item displays the capacity of physical logical devices and the number of devices. For details about this item, see the Physical Summary table.

Virtual Summary

This item displays capacity of virtual logical devices and the number of devices. For details about this item, see the table below about virtual summary.

Total DP Subscription Rate

This item displays the ratio of virtual logical device capacity to physical logical device capacity in the pool volume of Dynamic Provisioning.

Total Number of LDEVs

The number of LDEVs. The information displayed in this field depends on the type of system. See the following table.

Allocated

This item displays the capacity of path-defined volumes and the number of logical devices that the host can recognize. This capacity does not include the control cylinder.

Reserved - Used DP Pool

When Total is selected in Internal / External, this item displays the total capacity of the pages that are actually used in pool volume of Dynamic Provisioning and the number of logical devices. The pool volumes of Thin Image are included in the Dynamic Provisioning pool volume . This capacity does not include the control cylinder.

When an item other than Total is selected in Internal / External, this item displays the number of logical devices that are actually used in the Dynamic Provisioning pool volume. The capacity does not display in this item, but is counted as part of Reserved - Other.

Reserved - Unused DP Pool

When the total is selected in Internal / External, this item displays the capacity that is subtracted Used DP Pool value from total capacity of pool volume of Dynamic Provisioning. Pool volume of Thin Image is not included in pool volume of Dynamic Provisioning. Control cylinder is not included in the capacity. The number of logical devices does not display.

When an item other than Total is selected in Internal / External, the capacity and the number of logical devices are not displayed in this item, and the capacity is counted as part of Reserved - Other.

Reserved - Other

This item displays the total capacity and the number of logical devices of the following volumes:

• Journal volumes

• Thin Image pool volumes

The total capacity includes:

• The pool-VOL capacity that is not used as pool capacity

• The capacity of the system pool-VOL management area (approx. 4.1 GB per pool)

The control cylinder is not included in the capacity.

When an item other than Total is selected in Internal / External, the capacities for Reserved - Used HDP Pool and Reserved - Unused HDP Pool are also counted as part of this item.

Available Space - Unallocated

Displays volume capacity and number of logical devices which path is not allocated.

Available Space - Free Space

Displays volume capacity and number of logical devices which is free.

Physical Total

This item displays the total capacity of physical logical devices and the number of logical devices. Control cylinder is not included in the capacity.

DP Allocated¹

When total is selected in Internal / External, this item displays virtual volume capacity of Dynamic Provisioning that is defined paths and the number of logical devices. Virtual volumes for Thin Image are not included. A control cylinder is not included in the capacity.

DP Unallocated¹

When total is selected in Internal / External, this item displays the virtual volume capacity of Dynamic Provisioning that is not defined paths and the number of logical devices. A virtual volume is not included for either Thin Image. A control cylinder is not included in the capacity.

Other¹

When total is selected in Internal / External, the item displays the virtual volumes of other than Dynamic Provisioning and the number of logical devices. Control cylinder is not included in the capacity.

Virtual Total

This item displays the total capacity of virtual logical devices and the number of logical devices. Control cylinder is not included in the capacity.

1. When an item other than Total is selected in Internal / External, the capacity and the number of logical devices are not displayed.