Pair definition

A pair was defined.

Paircreate Start

Creation of the pair was started.

Paircreate Start is displayed when the full P-VOL copy operation is started for any reason, for example, when the delta resync operation fails and the Delta Resync Failure mirror option is set to Entire Copy.

Paircreate Complete

Creation of the pair was finished.

Paircreate Complete is displayed when the full P-VOL copy operation is completed for any reason, for example, when the delta resync operation fails and the Delta Resync Failure mirror option is set to Entire Copy.

Pairresync Start

Restoring of the pair was started.

Pairresync Complete

Restoring of the pair was finished.

Pairsplit-r Start

Splitting (Suspending) of the pair was started.

Pairsplit-r Complete

Splitting (Suspending) of the pair was finished.

Pairsplit-r (Failure)

The pair was split (suspended) because of a failure.

Pairsplit-S Start

Release of the pair was started.

Pairsplit-S Complete

Release of the pair was finished.

Status Change by MCU (SMPL to COPY)

The status of the pair was changed from SMPL to COPY because of an operation from the primary system.

Status Change by MCU (SMPL to PAIR)

The status of the pair was changed from SMPL to PAIR because of an operation from the primary system.

Status Change by MCU (COPY to PAIR)

The status of the pair was changed from COPY to PAIR because of an operation from the primary system.

Status Change by MCU (COPY to PSUS/PSUE)

The status of the pair was changed from COPY to PSUS or PSUE because of an operation from the primary system.

Status Change by MCU (PAIR to PSUS/PSUE)

The status of the pair was changed from PAIR to PSUS or PSUE because of an operation from the primary system.

Status Change by MCU (PAIR to SMPL)

The status of the pair was changed from PAIR to SMPL because of an operation from the primary system.

Status Change by MCU (COPY to SMPL)

The status of the pair was changed from COPY to SMPL because of an operation from the primary system.

Status Change by MCU (PSUS/PSUE to SMPL)

The status of the pair was changed from PSUS or PSUE to SMPL because of an operation from the primary system.

Status Change by MCU (PSUS/PSUE to COPY)

The status of the pair was changed from PSUS or PSUE to COPY because of an operation from the primary system.

Status Change by RCU (Pairsplit-r Start)

The status of the pair was changed because an operation for splitting a pair started at the secondary system.

Status Change by RCU (Pairsplit-r Complete)

The status of the pair was changed because an operation for splitting a pair finished at the secondary system.

Status Change by RCU (PSUS/PSUE to SMPL; Pairsplit-S Start)

An operation for releasing a pair has been started at the secondary system. The status of the pair will change from PSUS or PSUE to unpaired (SMPL).

Status Change by RCU (COPY to SMPL; Pairsplit-S Start)

An operation for releasing a pair has been started at the secondary system. The status of the pair will change from COPY to unpaired (SMPL).

Status Change by RCU (PAIR to SMPL; Pairsplit-S Start)

An operation for releasing a pair has been started at the secondary system. The status of the pair will change from PAIR to unpaired (SMPL).

Status Change by RCU (Pairsplit-S Complete)

The status of the pair was changed because an operation for releasing a pair finished at the secondary system.