show

Description

This subcommand outputs the following information to the standard output (for example, to the command prompt):

• The period during which monitoring data was collected on the SVP (storing period).

• The interval at which the monitoring data was collected (sampling interval).

Performance Monitor collects data between 1 and 15 days in the SVP. The show subcommand displays the storing period of monitoring data. Note the following example:

Range From : 2006/10/01 01:00 - To: 2006/10/01 15:00 Interval : 1min.

If using the range subcommand, you can narrow down the data which you want to save. From is the starting time and To is the ending time. Interval shows the sampling interval. For example, if it is Interval 15min, monitoring data is collected every 15 minutes.

Storing periods output by the show subcommand are the same as the information displayed in the Monitoring Term area of the Monitor Performance window.

The monitoring term area

You must log into the storage system with the login subcommand before the show subcommand runs.

Syntax

show

Outputs

The show subcommand displays the storing period and the sampling interval for the monitoring data. For example, the show subcommand outputs the following information:

Range     From: 2006/10/01 01:00  -  To: 2006/10/01 15:00
 Interval: 1min.

From indicates the starting time for collecting monitoring data. To indicates the ending time for collecting monitoring data.

Interval indicates the interval at which the monitoring data was collected (sampling interval). For example, Interval 15min. indicates that monitoring data was collected at 15-minute intervals.