CHB

Name of the channel board

Type

Package type of the channel board

Port Location

Name of the port on the channel board

Port Attribute

Attribute of the port

TCP Port Number

Port number to use for a socket (decimal)

Internal WWN / Internal iSCSI Name

WWN / iSCSI name of the port

Fabric

One of the Fibre topology settings indicating the setting status of the Fabric switch

Connection Type

One of the Fibre topology settings

• Point to Point

• FC-AL

IPv4 : IP Address

IPv4 address of the port

Output example: 192.168.0.100

IPv4 : Subnet Mask

IPv4 subnet mask of the port

Output example: 255.255.255.0

IPv4 : Default Gateway

IPv4 default gateway of the port

Output example: 255.255.255.0

IPv6 : Mode

IPv6 settings of the port

• Enabled

• Disabled

IPv6 : Link Local Address

IPv6 link local address of the port (16-digit hexadecimal)

IPv6 : Global Address

IPv6 global address of the port.

Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)

IPv6 : Global Address 2

IPv6 global address 2 of the port.

Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal)

IPv6 : Assigned Default Gateway

Assigned IPv6 default gateway

Selective ACK

Selective ACK mode

• Enabled

• Disabled

Ethernet MTU Size (Byte)

MTU settings (binary)

• 1,500

Keep Alive Timer

iSCSI keep alive timer (0 to 64,800) (sec)

VLAN : Tagging Mode

Tagging mode of VLAN

• Enabled

• Disabled

VLAN : ID

Number of VLAN set to the port (1 to 4,094)

CHAP User Name

User name for the CHAP authentication

iSNS Server : Mode

iSNS mode settings

• ON

• OFF

iSNS Server : IP Address

IP address of the iSNS server (30 to 65,535)

iSNS Server : TCP Port Number

Number of the TCP port used in iSNS (binary)

Address (Loop ID)

Fibre port address and Loop ID of the port

Port Security

Security of the port

• Enabled

• Disabled

Speed

Data transfer speed of the port

SFP Data Transfer Rate

Maximum transfer rate of SFP which the mounted package supports.

• 8G

• 10G

• 16G

• 32G

• Blank if the Package Type is 10iSCSI2c (CHB) or NAS module (CHB).

T10 PI Mode

Indicates whether the T10 PI mode can be applied to the port.

• Enabled

• Disabled

• Blank if the port type is a Fibre port other than 16FC2(CHB). For iSCSI ports, a hyphen (-) is displayed.

Resource Group Name

Name of the resource group to which the port belongs

Resource Group ID

ID for the resource group to which the port belongs (0 to 1023)

Number of Hosts

The number of the hosts registered to the port

Number of LUNs

The number of the LU paths defined to the port

Number of LDEVs

The number of the logical volumes that can be accessed through the port

Number of PGs

The number of the parity groups having the logical volumes that can be accessed through the port

Number of DKBs

The number of the disk boards controlling the parity group that contains the logical volumes that can be accessed through the port