Ports / Host Groups / iSCSI Targets: Hosts, LUNs, Host Mode Options, and CHAP Users tabs

Fibre Channel

The Ports/Host Groups/iSCSI Targets window displays the following information on the Hosts, LUNs, and Host Mode Options tabs when a Fibre Channel port is selected.

Summary

Item	Description
Volume Migration	View Migration Plans: Opens the View Migration Plans window. View Histories: Opens the View Histories window.
Host Group Name	Name of the host group.
Port ID	Identifier of the port.
Host Mode	Host mode of the host group.
Port Security	LUN security setting (Enabled or Disabled) on the port.
Virtual Storage Machine	Model name and serial number of the virtual storage machine that has a host group.
Asymmetric Access States	Asymmetric access states of the port. When using iSCSI, a hyphen (-) is displayed. Active/Optimized: Access from the host is preferentially performed on this port. Active/Non-Optimized: When the Active/Optimized port is disabled, access from the host is performed on this port.
T10 PI Mode	T10 PI attribute setting (Enabled or Disabled) on the port.

Hosts tab

Item	Description
Port ID	Identifier of the port.
HBA WWN	HBA WWNs and their icons.
Host Name	Name of the host.
Host Group Name	Name of the host group.
Add to Host Groups	Opens the Add to Host Groups window.
Add Hosts	Opens the Add Hosts window
Edit Host	Opens the Edit Host window.
Remove Hosts¹	Opens the Remove Hosts window.
Export¹	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.
Note: Available when you click More Actions.

LUNs tab

This tab provides information about the LU paths that correspond to the LDEV assigned to the logged-in user.

Item	Description
Port ID	Identifier of the port.
LUN ID	Icons and identifiers of the logical unit. Clicking a LUN ID opens the LUN Properties window.
LDEV ID	LDEV identifier, which is the combination of LDKC, CU, and LDEV. Clicking an LDEV ID takes you to the LDEV Properties window.
LDEV Name	Name of each LDEV.
Pool Name (ID)	Displays the pool name and pool ID. If the logical volume is not the volume other than V-VOL, a hyphen (-) is displayed.
Capacity	Total: Displays the logical volume capacity. Reserved: Displays the reserved capacity of the V-VOL. The displayed value of Reserved might be larger than the displayed value of Total due to following reasons: Reserved displays the reserved capacity that is rounded up on each page. The mapped capacity of V-VOL for Dynamic Provisioning includes the capacity of control information (168 MB is required per 3,145,548 MB). If used capacity is referenced during I/O or copy processing by software such as ShadowImage or Universal Replicator, the used capacity displayed might be different from the actual capacity even if the full allocation is enabled on the V-VOL. This is caused by a gap between the times that information is gathered about the mapped capacity and the reserved capacity. Used: Displays the sum of the mapped capacity and the reserved capacity. The Used value displayed might be larger than the Total value displayed of due to following reasons: Used displays the sum of the mapped capacity and the reserved capacity that is rounded up on each page. The mapped capacity of DP-VOL includes the capacity of the control information (Requires a maximum of 168 MB per 3,145,548 MB). DP-VOL with data direct mapping enabled includes the control information (168 MB is required per 3,145,548 MB) and the capacity for one page. Used(%): For the entire capacity of V-VOL, this item displays percentages of the sum of the mapped capacity and the reserved capacity. If the logical volume is not the volume other than V-VOL, a hyphen (-) is displayed.
Used Capacity	Tier1: Displays the used capacity of tier 1. If the logical volume is not the volume other than V-VOL for Dynamic Tiering or active flash, a hyphen (-) is displayed. Tier2: Displays the used capacity of tier 2. If the logical volume is not the volume other than V-VOL for Dynamic Tiering or active flash, or if tier 2 does not exist, a hyphen (-) is displayed. Tier3: Displays the used capacity of tier 3. If the logical volume is not the volume other than V-VOL for Dynamic Tiering or active flash, or if tier 3 does not exist, a hyphen (-) is displayed. The reserved capacity is not included in the used capacity for each tier of the V-VOL. Therefore, the Used value in the Capacity column may not correspond with the Used Capacity value.
Capacity Saving	Capacity saving setting of the LDEV: Compression: The compression function is used. Deduplication and Compression: The deduplication and compression functions are used. Disabled: The capacity saving function is not used.
Capacity Saving Status	Status of the capacity saving function: Enabling: The format for enabling the capacity saving function is being performed. Rehydrating: The format for disabling the capacity saving function is being performed. Deleting Volume: The deletion of DP-VOL whose capacity saving function is Enabled is being performed. Enabled: The capacity saving function is enabled. Disabled: The capacity saving function is disabled. Failed: Data cannot be secured. - (hyphen): The LDEV does not support the capacity saving function.
Provisioning Type	Displays the type for each logical volume. Basic: Internal volume. External: External volume. DP: V-VOL of Dynamic Provisioning. Snapshot: Thin Image volume.
CLPR	Cache logical partition number, displayed as `ID`:`CLPR`.
Full Allocation	Displays the status of the full allocation setting in a pool that is associated with the V-VOL. Enable: Pages are reserved. Disable: Pages are not reserved.
Tiering Policy	Displays the tiering policy name and ID. All(0): Policy specified when all tiers in the pool are used. Level1(1) to Level31(31): Policies selected from Level1 to Level31 are set to the V-VOL. From Level 6 (6) to Level 31 (31), the names of tiering policies can be changed. If these names have changed, the new names appear. Hyphen (-): The logical volume is not the Dynamic Tiering or active flash V-VOL.
New Page Assignment Tier	Displays the new page assignment tier of the tiering policy. Hyphen (-): The logical volume is not the Dynamic Tiering or active flash V-VOL.
Tier Relocation	Displays whether tier relocation is set to Enable or Disable. If the logical volume is not to the V-VOL of Dynamic Tiering or active flash, a hyphen (-) is displayed.
Attribute	Displays the attribute of the LDEV. Command Device: Command device. Remote Command Device: Remote command device. Data Direct Mapping: LDEV with the data direct mapping attribute enabled. NAS Platform (User LU): LDEV used for storing the NAS user data. This value appears if the NAS module is installed. NAS Platform (System LU): LDEV used for storing the NAS firmware system data. This value appears if the NAS module is installed. Hyphen (-): Volume in which the attribute is not defined.
Access Attribute¹	Displays the access attribute of the LDEV.
Encryption¹	Displays the information about parity group encryption. Enable: Encryption setting of a parity group in which the LDEV is placed is enabled. Or the virtual volume associated with the pool whose pool-VOLs are enabled of the encryption setting. Encryption setting of a parity group (or a pool) in which the LDEV is placed is disabled. Or the virtual volume associated with the pool whose pool-VOLs are disabled of the encryption setting. Mixed: Pool-VOLs with enabled encryption settings and pool-VOLs with disabled encryption settings are intermixed in the pool in which the LDEV is placed. Caution: The data encryption is not ensured in the pool that has the Mixed encryption setting. To manage the data encryption securely, use the pool with an encryption setting of Enabled or Disabled. Hyphen(-): External volume or migration volume. As for DP-VOL of Dynamic Provisioning , the pool-VOL in the pool of which DP-VOL belongs is an external volume, or the pool of which DP-VOL belongs is being blocked. This item is not displayed when using Virtual Storage Platform G200.
Number of Paths	Displays the total number of relevant paths and alternative paths.
ALUA Mode	Information about the ALUA mode. Enabled: LDEV can be used in ALUA. Disabled: LDEV cannot be used in ALUA.
T10 PI¹	Displays the LDEV's T10 PI attribute setting (Enabled or Disabled).
Data Direct Mapped LDEV	Displays LDEV ID of pool-VOL in the pool with data direct mapping enabled. If the link of LDEV ID is clicked, the LDEV Properties window appears. A hyphen (-) appears if the data direct mapping attribute is disabled.
Virtual Storage Machine¹	Information about the virtual storage machine. Model / Serial Number¹: Model name and serial number of the virtual storage machine that has the LDEV. LDEV ID¹: Virtual LDEV ID. If a Virtual LDEV ID is not assigned to LDEV, this column is blank. Device Name¹: Virtual device name, which is a combination of the virtual emulation type, virtual LUSE volume number, and the virtual CVS attribute. Values of the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute appear only for items that have been set. This column is blank when the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute are not set. If the virtual CVS attribute is set, CVS is attached as the suffix to the device name. SSID¹: Virtual SSID. If Virtual SSID is not set for LDEV, this column is blank. Attribute¹: Virtual LDEV attribute. If the attribute is not set for the LDEV, this column is blank.
Add LUN Paths	Opens the Add LUN Paths window.
Copy LUN Paths	Opens the Copy LUN Path window.
Edit Command Devices	Opens the Edit Command Devices window.
View Host-Reserved LUNs²	Displays the Host-Reserved LUNs window.
Delete LUN Paths²	Opens the Delete LUN Paths window.
Edit UUIDs²	Opens the Edit UUIDs window.
Delete UUIDs	Opens the Delete UUIDs window.
Create LDEVs	Opens the Create LDEVs window.
Edit LDEVs	Opens the Edit LDEVs window.
Format LDEVs	Opens the Format LDEVs window.
Shred LDEVs	Opens the Shred LDEVs window. For details, see Volume Shredder User Guide.
Block LDEVs	Opens the Block LDEVs window.
Restore LDEVs	Opens the Restore LDEVs window.
Assign MP Blade	Opens the Assign MP Blade window.
Reclaim Zero Pages	Opens the Reclaim Zero Pages window.
Stop Reclaiming Zero Pages	Opens the Stop Reclaiming Zero Pages window.
Expand V-VOLs	Opens the Expand V-VOL window.
View Tier Properties	Opens the View Tier Properties window.
Migrate Volumes	Opens the Migrate Volumes window.
Force Delete Pairs	TC Pairs: Opens the Force Delete Pairs (TC Pairs) window. For details see the TrueCopy User Guide. UR Pairs: Opens the Force Delete Pairs (UR Pairs) window. For details see the Universal Replicator User Guide. GAD Pairs: Opens the Force Delete Pairs (GAD Pairs) window. For details see the Global-Active Device User Guide.
View ALUs / SLUs	Open the ALUs / SLUs window.
Unbind SLUs	Opens the Unbind SLUs window.
Export²	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.
Notes: Does not appear by default. To display this item, change the Column Settings of the table option. Available when you click More Actions.

Host Mode Options tab

Item	Description
Mode No.	Number of the host mode option.
Option Description	Description of the host mode option.
Status	Setting (enable or disable) of the host mode option.
Edit Host Groups	Opens the Edit Host Group window.
Export	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

iSCSI

The Ports/Host Groups/iSCSI Targets window displays the following information on the Hosts, LUNs, Host Mode Options, and CHAP Users tabs when an iSCSI port is selected.

Summary

Item	Description
iSCSI Target Alias	iSCSI target alias.
iSCSI Target Name	iSCSI target name.
Port ID	Identifier of the port.
Virtual Storage Machine	Model name and serial number of the virtual storage machine that has the port.
Host Mode	Host mode of the iSCSI target.
Port Security	LUN security setting (Enabled or Disabled) on the port.
Authentication	Information about the authentication. Method: Authentication method that is CHAP, None, or Comply with Host Setting Mutual CHAP: Mutual CHAP setting that is Enabled or Disabled. User name

Host tab

This tab provides information about the iSCSI Names that are registered to the iSCSI targets assigned to the logged-on user.

Item	Description
Port ID	Identifier of the port.
HBA iSCSI Name	HBA iSCSI Names and their icons
Host Name	Name of hosts.
iSCSI Target Alias	iSCSI target alias.
iSCSI Target Name	iSCSI target name.
Edit Host	Opens the Edit Host window.
Add Hosts	Opens the Add Hosts window.
Remove Hosts	Opens the Remove Hosts window.
Export	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

LUNs tab

This tab provides information about the LU paths that correspond to the LDEV assigned to the logged-in user.

Item	Description
Port ID	Identifier of the port.
LUN ID	Icons and identifiers of the logical unit. Clicking a LUN ID opens the LUN Properties window.
LDEV ID	LDEV identifier, which is the combination of LDKC, CU, and LDEV. Clicking an LDEV ID takes you to the LDEV Properties window.
LDEV Name	Name of each LDEV.
Pool Name (ID)	Displays the pool name and pool ID. If the logical volume is not the volume other than V-VOL, a hyphen (-) is displayed.
Capacity	Total: Displays the logical volume capacity. Reserved: Displays the reserved capacity of the V-VOL. The displayed value of Reserved might be larger than the displayed value of Total due to following reasons: Reserved displays the reserved capacity that is rounded up on each page. The mapped capacity of V-VOL for Dynamic Provisioning includes the capacity of control information (168 MB is required per 3,145,548 MB). If used capacity is referenced during I/O or copy processing by software such as ShadowImage or Universal Replicator, the used capacity displayed might be different from the actual capacity even if the full allocation is enabled on the V-VOL. This is caused by a gap between the times that information is gathered about the mapped capacity and the reserved capacity. Used: Displays the sum of the mapped capacity and the reserved capacity. The Used value displayed might be larger than the Total value displayed of due to following reasons: Used displays the sum of the mapped capacity and the reserved capacity that is rounded up on each page. The mapped capacity of DP-VOL includes the capacity of the control information (Requires a maximum of 168 MB per 3,145,548 MB). DP-VOL with data direct mapping enabled includes the control information (168 MB is required per 3,145,548 MB) and the capacity for one page. Used(%): For the entire capacity of V-VOL, this item displays percentages of the sum of the mapped capacity and the reserved capacity. If the logical volume is not the volume other than V-VOL, a hyphen (-) is displayed.
Used Capacity	Tier1: Displays the used capacity of tier 1. If the logical volume is not the volume other than V-VOL for Dynamic Tiering or active flash, a hyphen (-) is displayed. Tier2: Displays the used capacity of tier 2. If the logical volume is not the volume other than V-VOL for Dynamic Tiering or active flash, or if tier 2 does not exist, a hyphen (-) is displayed. Tier3: Displays the used capacity of tier 3. If the logical volume is not the volume other than V-VOL for Dynamic Tiering or active flash, or if tier 3 does not exist, a hyphen (-) is displayed. The reserved capacity is not included in the used capacity for each tier of the V-VOL. Therefore, the Used value in the Capacity column may not correspond with the Used Capacity value.
Capacity Saving	Capacity saving setting of the LDEV: Compression: The compression function is used. Deduplication and Compression: The deduplication and compression functions are used. Disabled: The capacity saving function is not used.
Capacity Saving Status	Status of the capacity saving function: Enabling: The format for enabling the capacity saving function is being performed. Rehydrating: The format for disabling the capacity saving function is being performed. Deleting Volume: The deletion of DP-VOL whose capacity saving function is Enabled is being performed. Enabled: The capacity saving function is enabled. Disabled: The capacity saving function is disabled. Failed: Data cannot be secured. - (hyphen): The LDEV does not support the capacity saving function.
Provisioning Type	Displays the type for each logical volume. Basic: Internal volume. External: External volume. DP: V-VOL of Dynamic Provisioning. Snapshot: Thin Image volume.
CLPR	Cache logical partition number, displayed as `ID`:`CLPR`.
Full Allocation	Displays the status of the full allocation setting in a pool that is associated with the V-VOL. Enable: Pages are reserved. Disable: Pages are not reserved.
Tiering Policy	Displays the tiering policy name and ID. All(0): Policy specified when all tiers in the pool are used. Level1(1) to Level31(31): Policies selected from Level1 to Level31 are set to the V-VOL. Hyphen (-): The logical volume is not the Dynamic Tiering or active flash V-VOL.
New Page Assignment Tier	Displays the new page assignment tier of the tiering policy. Hyphen (-): The logical volume is not the Dynamic Tiering or active flash V-VOL.
Tier Relocation	Displays whether tier relocation is set to Enable or Disable. If the logical volume is not to the V-VOL of Dynamic Tiering or active flash, a hyphen (-) is displayed.
Attribute	Displays the attribute of the LDEV. Command Device: Command device. Remote Command Device: Remote command device. Data Direct Mapping: LDEV with the data direct mapping attribute enabled. Hyphen (-): Volume in which the attribute is not defined.
Access Attribute¹	Displays the access attribute of the LDEV.
Encryption¹	Displays the information about parity group encryption. Enable: Encryption setting of a parity group in which the LDEV is placed is enabled. Or the virtual volume associated with the pool whose pool-VOLs are enabled of the encryption setting. Encryption setting of a parity group (or a pool) in which the LDEV is placed is disabled. Or the virtual volume associated with the pool whose pool-VOLs are disabled of the encryption setting. Mixed: Pool-VOLs with enabled encryption settings and pool-VOLs with disabled encryption settings are intermixed in the pool in which the LDEV is placed. Caution: The data encryption is not ensured in the pool that has the Mixed encryption setting. To manage the data encryption securely, use the pool with an encryption setting of Enabled or Disabled. Hyphen(-): External volume or migration volume. As for DP-VOL of Dynamic Provisioning , the pool-VOL in the pool of which DP-VOL belongs is an external volume, or the pool of which DP-VOL belongs is being blocked. This item is not displayed when using Virtual Storage Platform G200.
Number of Paths	Displays the total number of relevant paths and alternative paths.
ALUA Mode	Information about the ALUA mode. Enabled: The LDEV can be used in ALUA. Disabled: The LDEV cannot be used in ALUA.
Data Direct Mapped LDEV	Displays LDEV ID of pool-VOL in the pool with data direct mapping enabled. If the link of LDEV ID is clicked, the LDEV Properties window appears. A hyphen (-) appears if the data direct mapping attribute is disabled.
Virtual Storage Machine¹	Information about the virtual storage machine. Model / Serial Number¹: Model name and serial number of the virtual storage machine that has the LDEV. LDEV ID¹: Virtual LDEV ID. If a Virtual LDEV ID is not assigned to LDEV, this column is blank. Device Name¹: Virtual device name, which is a combination of the virtual emulation type, virtual LUSE volume number, and the virtual CVS attribute. Values of the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute appear only for items that have been set. This column is blank when the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute are not set. If the virtual CVS attribute is set, CVS is attached as the suffix to the device name. SSID¹: Virtual SSID. If Virtual SSID is not set for LDEV, this column is blank. Attribute¹: Virtual LDEV attribute. If the attribute is not set for the LDEV, this column is blank.
Add LUN Paths	Opens the Add LUN Paths window.
Copy LUN Paths	Opens the Copy LUN Path window.
Edit Command Devices	Opens the Edit Command Devices window.
View Host-Reserved LUNs²	Displays the Host-Reserved LUNs window.
Delete LUN Paths²	Opens the Delete LUN Paths window.
Edit UUIDs²	Opens the Edit UUIDs window.
Delete UUIDs ²	Opens the Delete UUIDs window.
Create LDEVs²	Opens the Create LDEVs window.
Edit LDEVs²	Opens the Edit LDEVs window.
Format LDEVs²	Opens the Format LDEVs window.
Shred LDEVs ²	Opens the Shred LDEVs window. For details, see Volume Shredder User Guide.
Block LDEVs²	Opens the Block LDEVs window.
Restore LDEVs²	Opens the Restore LDEVs window.
Assign MP Blade²	Opens the Assign MP Blade window.
Reclaim Zero Pages²	Opens the Reclaim Zero Pages window.
Stop Reclaiming Zero Pages²	Opens the Stop Reclaiming Zero Pages window.
Expand V-VOLs²	Opens the Expand V-VOL window.
View Tier Properties²	Opens the View Tier Properties window.
Migrate Volumes²	Opens the Migrate Volumes window.
Interrupt LDEV Task²	Select Shred and the Interrupt Shredding Task window is displayed.
Force Delete Pairs²	TC Pairs: Opens the Force Delete Pairs (TC Pairs) window. For details see the TrueCopy User Guide. UR Pairs: Opens the Force Delete Pairs (UR Pairs) window. For details see the Universal Replicator User Guide. GAD Pairs: Opens the Force Delete Pairs (GAD Pairs) window. For details see the Global-Active Device User Guide.
View ALUs / SLUs ²	Open the ALUs / SLUs window.
Unbind SLUs²	Opens the Unbind SLUs window.
Export²	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.
Notes: Does not appear by default. To display this item, change the Column Settings of the table option. Available when you click More Actions.

Host Mode Options tab

Item	Description
Mode No.	Number of the host mode option.
Option Description	Description of the host mode option.
Status	Setting (enable or disable) of the host mode option.
Edit iSCSI Targets	Opens the Edit iSCSI Targets window.
Export	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.

CHAP Users tab

Item	Description
Port ID	Identifier of the port.
User Name	User name. Clicking a user name opens the CHAP User Properties window.
Number of iSCSI Targets	Number of iSCSI Targets
iSCSI Target Alias	iSCSI target alias.
iSCSI Target Name	iSCSI target name.
Edit CHAP User	Opens the Edit CHAP User window.
Remove CHAP Users	Opens the Remove CHAP Users window.
Export	Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.