Port Security

Select whether LUN security is Enabled or Disabled.

Address (Loop ID)

Select the address of the selected port. .

Fabric

Select whether a fabric switch is set to ON or OFF. .

Connection Type

Select the topology.

• FC-AL: Fibre Channel arbitrated loop
• P-to-P (point-to-point).

Caution: Some fabric switches require that you specify point-to-point topology. If you enable a fabric switch, check the documentation for the fabric switch to determine whether your switch requires point-to-point topology.

IPv4 Settings

Information about IPv4.

• IP Address: IP address of the port. If 2 or more ports are selected, this information cannot be specified.
• Subnet Mask: Subnet mask of the port.
• Default Gateway: Default gateway of the port.

IPv6 Mode

Specify this information if IPv6 is used or not used.

• Enable: IPv6 mode is enabled. If Enable is selected, the IPv6 Setting of the following can be specified.
• Disable: IPv6 mode is disabled.

Port Security

Specify whether to use LUN security on the port.

• Enable: Use LUN security on the port.
• Disable: Do not use LUN security on the port.

Port Speed

(VSP Gx00 models, VSP Fx00 models) Select the data transfer speed for the selected port: 1 Gbps, 10 Gbps, or Auto.

TCP Port Number

Specify the TCP port number.

Selective ACK

Specify this information if the selective ACK is used or not used.

• Enable: The selective ACK is enabled.
• Disable: The selective ACK is disabled.

Delayed ACK

Specify this information if the delayed ACK is used or not used.

• Enable: The delayed ACK is enabled.
• Disable: The delayed ACK is disabled.

Maximum Window Size

Select the maximum window size from 64 KB, 128 KB, 256 KB, 512 KB, or 1024 KB.

Ethernet MTU Size

Select Ethernet MTU size from 1500 bytes, 4500 bytes, or 9000 bytes.

Keep Alive Timer

Specify the interval time to perform the keep alive timer option.

VLAN Tagging Mode

Specify this information if the VLAN tagging mode is used or not used.

• Enable: The VLAN tagging mode is enabled and specify the VLAN ID in the text box.
• Disable: The VLAN tagging mode is disabled.

iSNS Server

Specify this information if the iSNS server is used or not used.

• Enable: The iSNS server mode is enabled. And specify the IP Address and TCP Port Number of the following.

• Disable: The iSNS server mode is disabled.

IP Address

Specify the IP address for IPv4 or IPv6.

TCP Port Number

Specify the TCP port number.

CHAP User Name

Specify the CHAP user name.

Secret

Specify the secret to be used for host authentication.

Re-enter Secret

Specify the secret again for confirmation.