Formatting a specific LDEV
Use this procedure to perform Normal formatting on a volume.
- Formatting
DP-VOLs with deduplication and compression enabled might take a while to complete. Also, the pool usage might increase by the format processing. Once the format processing starts, it cannot be stopped.
If you want to format all DP-VOLs in a pool that have the capacity saving setting enabled, first block and then format the deduplication system data volume, and then format the DP-VOLs. Blocking and formatting the deduplication system data volume first can reduce the DP-VOL format processing time and prevent the increase in pool usage.
- If you format DP-VOLs for which the capacity saving setting is disabled and Deduplication Data is Enabled, the capacity saving setting for the DP-VOLs might become Compression. If you format the deduplication system data volume for a pool that has DP-VOLs for which the capacity saving setting is disabled and Deduplication Data is Enabled, the capacity saving setting for the DP-VOLs might become Deduplication and compression. Therefore, verify the capacity saving setting of DP-VOLs after the format operation completes.
Before you begin
Procedure
Click Storage Systems, and then expand the Storage Systems tree.
Click Logical Devices.
In the Logical Devices window, select the LDEV ID of the LDEV you want to format.
NoteWhen you format a deduplication system data volume, you must select only the (one) deduplication system data volume. Do not select any other volumes.Block the LDEV to be formatted.
For information about blocking internal volumes, see Blocking LDEVs. For information about blocking external volumes, see the Universal Volume Manager User Guide.Click More Actions, and select Format LDEVs.
In the Format LDEVs window, select the format type from the Format Type list, and then click Finish.
Note the settings in the Confirm window, enter a unique Task Name or accept the default, and click Apply.
If Go to tasks window for status is checked, the Tasks window opens.