Local Storage System

Displays the following information about the volume on the local storage system.

• LDEV ID(LDEV Name): Displays the LDEV ID and the LDEV name of the volume in the local storage system.

If the LDEV name is long and abbreviated by using "...", place the cursor on the LDEV name to display a tooltip that shows the LDEV name.

• Number of Paths: Displays the number of paths.

Click the link to display a path list.

• Provisioning Type, Encryption, T10 PI: Displays the provisioning type, encryption status, and T10 PI attribute of the volume on the local storage system. The encryption status is displayed only when it is Enabled or Mixed. Information about the T10 PI attribute is displayed only when the T10 PI attribute is enabled. If "..." is displayed, hover the cursor over "..." to display the complete information as a tooltip.

• T10 PI: Displays information about the T10 PI attribute of the volume.

• Enable: The T10 PI attribute of the volume is enabled.

• Disable: The T10 PI attribute of the volume is disabled.

• Attribute, capacity: Displays the volume attribute and the capacity.

• Model / Serial Number, CLPR ID:CLPR name: Displays the model, serial number, CLPR ID, and CLPR name of the local storage system.

Copy Type

Displays the copy type.

Status

Displays the pair status.

Path Group

Displays the path group ID of the pair.

If the primary volume is in the local storage system and you click the path group ID, a remote path list appears.

Mirror ID

Displays the mirror ID.

Remote Storage System

Displays the information about the remote storage system.

• LDEV ID: Displays the LDEV ID of the volume in the remote storage system.

• Port ID / Host Group ID or iSCSI Target ID / LUN ID: Displays the port name, the host group ID or iSCSI target ID, and the LUN ID of the volume in the remote storage system.

This information is only for identifying the LDEV ID when creating a pair. Therefore this information is not updated even if the path setting is changed at the connection destination.

• Capacity: Displays the capacity.

• Model / Serial Number: Displays the model and serial number of the remote storage system.

Status

Displays the status.

Failure Factor

Displays the failure factor.

Quorum Disk ID (LDEV ID)

Displays the quorum disk ID and the LDEV ID.

CTG ID

Displays the consistency group ID.

Copy Pace

Displays the copy speed.

Paired Time

Displays the time when the pair was created.

Last Update Time

Displays the time of the last update.

Pair Copy Time

Displays the pair copy time.

Local Volume

Displays information of the volume in the local storage system:

• I/O Mode: Displays the I/O mode.

• ALUA Mode: Displays the ALUA mode information.

Virtual Storage Machine

Displays the information about the virtual storage machine.

• Model / Serial Number: Displays the model and serial number of the virtual storage machine.

• LDEV ID: Displays the virtual LDEV ID of the volume. If the virtual LDEV ID is not assigned, a blank is displayed.

• Device Name: Displays the virtual device name of the volume.

A virtual device name is displayed in a format that combines the virtual emulation type, the number of virtual LUSE volumes, and the virtual CVS attribute. Of the virtual emulation type, the number of virtual LUSE volumes, and the virtual CVS attribute, only the specified items are displayed. If these are not specified, a blank is displayed. If the virtual CVS attribute is specified, "CVS" is added at the end.

• SSID: Displays the virtual SSID of the volume. If no virtual SSID is set, a blank is displayed.