Copying one or more (but not all) LU paths defined in a host group
Perform one of the following to display the Ports / Host Groups / iSCSI Targets window.
For Command Suite:
On the Resource tab, expand the Storage Systems tree. On the target storage system, click Port / Host Group.
For Storage Navigator:
Expand the Storage Systems tree and select Ports / Hosts Groups / iSCSI Targets.
Select the port.
The host groups corresponding to the port appear.
Select the host group.
Information about the selected host group appears on the window.
Select the LUNs tab.
Information about LU paths associated with the selected host group appears.
Select one or more logical units to which volumes are assigned (if a volume is assigned to a logical unit, the columns on the right of the LUN column are not empty).
Select Copy LUN Paths.
In the Copy LUN Paths window, select the host group to which you want to paste paths from the Available Host Groups table, then click Add.
The selected host groups appear in the Selected Host Groups table.
Click Finish.
In the Confirm window, confirm the settings, in Task Name type a unique name for this task or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.