Copying one or more (but not all) LU paths defined in an iSCSI target
Perform one of the following to display the Ports / Host Groups / iSCSI Targets window.
For Command Suite:
On the Resource tab, expand the Storage Systems tree. On the target storage system, click Port / Host Group.
For Storage Navigator:
Expand the Storage Systems tree and select Ports / Hosts Groups / iSCSI Targets.
Select the port.
The iSCSI targets corresponding to the port appear.
Select the iSCSI target.
Information about the selected iSCSI target appears on the right side of the window.
Select the LUNs tab.
Information about LU paths associated with the selected iSCSI target appears.
Select one or more logical units to which volumes are assigned (if a volume is assigned to a logical unit, the columns on the right of the LUN column are not empty).
Display the Copy LUN Paths window by performing one of the following:
Click Copy LUN Paths.
From the Actions menu, select Ports/Host Groups, iSCSI, then Copy LUN Paths.
In the Selection Object, select iSCSI Target.
In the Copy LUN Paths window, select the iSCSI target to which you want to paste paths from the Available iSCSI Targets table, then click Add.
The selected iSCSI targets appear in the Selected iSCSI Targets table.
Click Finish.
In the Confirm window, confirm the settings, in Task Name type a unique name for this task or accept the default, then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.