Changing LDEV settings

The Storage Administrator (Provisioning) role is required to perform this task.

Before registering an LDEV, you can need to change the LDEV settings.

1. In the Create LDEVs window, in the Selected LDEVs table, select an LDEV and click Change LDEV Settings.

2. In the Change LDEV Settings window, change the setting of LDEV Name, Initial LDEV ID, MP Unit, or T10 PI.

• If you change LDEV Name, specify the prefix characters and the initial number for this LDEV.

• If you change Initial LDEV ID, specify the number of LDKC, CU, LDEV, and Interval. To confirm used LDEV IDs, click View LDEV IDs in the View LDEV IDs window.

• If you change MP Unit, click the list and specify the MP unit ID. If the specific MP unit is specified, select the MP unit ID. If any MP unit is specified, click Auto.

• If you change the T10 PI setting, select Enable or Disable.

3. Click OK.

4. In the Create LDEVs window, click Finish.

5. In the Confirm window, verify the settings, then click Apply.

The settings are changed.

If Go to tasks window for status is checked, the Tasks window opens.