If multiple tasks that are connected in one wizard are executed, this window shows all configured items of tasks. To show information of configured items other than this topic, click Back to display related setting windows, then click Help.Delete LUN Paths confirmation window
Confirm proposed settings, name the task, then click Apply. The task is added to the execution queue.
Selected LUN Paths table
|
Item |
Description |
|---|---|
|
Port ID |
Identifier of the port. |
|
LUN ID |
Identifier of the selected LUN path. |
|
LDEV ID |
LDEV identifier, which is the combination of LDKC, CU, and LDEV. |
|
LDEV Name |
Name of the LDEV. |
|
Host Group Name / iSCSI Target Alias |
Name of the host group or iSCSI target alias. |
|
iSCSI Target Name |
iSCSI target name. |
|
Capacity |
Size of each logical volume. |
|
Attribute |
Displays the attribute of the LDEV. Command Device: Command device. Remote Command Device: Remote command device. Data Direct Mapping: LDEV of the data direct mapping attribute. Hyphen (-): Volume in which the attribute is not defined. |
|
Asymmetric Access States |
Asymmetric access states of the port. When using iSCSI, a hyphen (-) is displayed. Active/Optimized: Access from the host is preferentially performed on this port. Active/Non-Optimized: When the Active/Optimized port is disabled, access from the host is performed on this port. |
|
T10 PI |
T10 PI attribute setting (Enabled or Disabled) on LDEV. |
If multiple tasks that are connected in one wizard are executed, this window shows all configured items of tasks. To show information of configured items other than this topic, click Back to display related setting windows, then click Help.