Item
Description
LDEV ID
LDEV identifier, which is the combination of LDKC, CU, and LDEV.
LDEV Name
LDEV name.
Status
LDEV status.
Normal: Normal status.
Blocked: Host cannot access a blocked volume.
Warning: Problem occurs in the volume.
Formatting: Volume is being formatted.
Preparing Quick Format: Volume is being prepared for quick formatting.
Quick Formatting: Volume is being quick-formatted.
Correction Access: Access attribute is being corrected.
Copying: Data in the volume is being copied.
Read Only: Data cannot be written on a read-only volume.
Shredding: Volume is being shredded.
Hyphen (-): Any status other than the above.
PIN Status
Displays the PIN status.
V-VOL Management Task1
Displays the V-VOL management task being performed on a Dynamic Provisioning, Dynamic Tiering, V-VOL.
-
Reclaiming Zero Pages: The process is in progress.
-
Waiting for Zero Page Reclaiming: The process has been waited.
-
Blank: The V-VOL management task can be performed on the volume, but the task is not currently in process.
-
Hyphen(-): The V-VOL management task cannot be performed on the volume.
Capacity
LDEV capacity.
Number of paths
Number of paths set for the LDEV.
Provisioning Type
Provisioning type to be assigned to the LDEV.
Basic: Internal volume.
DP: DP-VOL
External: External volume.
External MF: Migration volume.
Snapshot: Thin Image volume.
ALU: LDEV of the ALU attribution.
Attribute
Attribute of the volume indicating how the LDEV is being used.
Command Device: Volume is a command device.
Remote Command Device: Volume is a remote command device.
JNL VOL: Volume is a journal volume.
Pool VOL: Volume is a pool volume. The number in parentheses shows the pool identifier.
Quorum Disk: Quorum disk for global-active device.
ALU: LDEV of the ALU attribution.
SLU: LDEV of the SLU attribution.
Data Direct Mapping: LDEV of the data direct mapping attribute
Hyphen (-): Volume other than the above.
Access Attribute1
Displays the access attribute of the LDEV.
Pool Name (ID)
Pool name (pool identifier).
Parity Group ID
Parity group identifier.
RAID Level
RAID level. An asterisk (*) indicates that the parity group from which the LDEV is carved is interleaved (concatenated).
MP Unit ID2
MP unit identifier.
Encryption1
Displays information about the encryption information.
-
Enable: Encryption setting of a parity group (or a pool) in which the LDEV is placed is disabled. Or the virtual volume associated with the pool whose pool-VOLs are disabled of the encryption setting.
-
Disable: Encryption setting of a parity group (or a pool) in which the LDEV is placed is disabled. Or the virtual volume associated with the pool whose pool-VOLs are disabled of the encryption setting.
-
Mixed: Pool-VOLs whose encryption settings are enabled and pool-VOLs whose encryption settings are disabled are intermixed in the pool in which the LDEV is placed.
Caution: The data encryption is not ensured in the pool that has the Mixed encryption setting. To manage the data encryption securely, use the pool with an encryption setting of Enabled or Disabled.
-
Hyphen(-): External volume. For DP-VOL of Dynamic Provisioning, either the pool-VOL in the pool that owns DP-VOL is an external volume or that pool is being blocked.
Expanded Space Used1
Displays the allocation of the LDEV in the expanded area or the physical area. If accelerated compression is enabled, LDEVs are initially allocated in the physical area. Otherwise, LDEVs are allocated in the expanded area.
Yes: The LDEV is allocated in the expanded area.
No: The LDEV is allocated in the physical area.
ALUA Mode
Information about the ALUA mode.
Enabled: The LDEV can be used in ALUA.
Disabled: The LDEV cannot be used in ALUA.
T10 PI1
T10 PI attribute setting (Enabled or Disabled) on LDEV.
External Storage System1
Information about the external storage system.
If LDEV is the DP-VOL of the data direct mapping attribute, the information about the external storage system to which LDEV is being mapped appears.
-
Vendor/Model/Serial Number: The information about these items of the external storage system is displayed. A hyphen (-) appears if an external storage system is not mapped to LDEV.
-
Path Group ID: The information about this item of the external storage system is displayed. If the link of the path group id is clicked, the Mapped Volumes tab appears. A hyphen (-) appears if an external storage system is not mapped to LDEV.
Data Direct Mapping1
Information about the data direct mapping.
-
LDEV ID: LDEV ID of the pool-VOL in the pool of the data direct mapping attribute, or LDEV ID of the DP-VOL of the data direct mapping attribute. If the link of the LDEV ID is clicked, the LDEV Properties window appears. If the data direct mapping attribute is disabled, a hyphen (-) is displayed. If DP-VOL of the data direct mapping attribute is not created in the pool of the data direct mapping attribute, this field is blank.
-
Parity Group ID: Parity Group ID of the pool-VOL in the pool of the data direct mapping attribute. If the data direct mapping attribute is disabled, a hyphen (-) is displayed.
Resource Group Name (ID)1
Resource group name and identifier of which this LDEV is a member.
Virtual Storage Machine1
Information about the virtual storage machine.
-
Model / Serial Number1: Model name and serial number of the virtual storage machine that has LDEV.
-
LDEV ID1: Virtual LDEV ID. If a Virtual LDEV ID is not assigned to LDEV, this column is blank.
-
Device Name1: Virtual device name, which is a combination of the virtual emulation type, virtual LUSE volume number, and the virtual CVS attribute. Values of the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute appear only for items that have been set. This column is blank when the virtual emulation type, virtual LUSE volume number, and virtual CVS attribute are not set. If the virtual CVS attribute is set, CVS is attached as the suffix to the device name.
-
SSID1: Virtual SSID. If Virtual SSID is not set for LDEV, this column is blank.
Create LDEVs
Opens the .
Add LUN Paths
Opens the LUN Paths window.
Edit LDEVs
Opens the Edit LDEVs window.
Format LDEVs3
Opens the Format LDEVs window.
Delete LDEVs3
Opens the Delete LDEVs window.
Shred LDEVs3
Opens the Shred LDEVs window.
Delete LUN Paths3
Opens the Delete LUN Paths window.
Edit Command Device3
Opens the Edit Command Devices window
Block LDEVs3
Opens the Block LDEVs window.
Restore LDEVs3
Opens the Restore LDEVs window.
Assign MP Unit3
Opens the Assign MP Unit window.
Delete UUIDs3
Opens the Delete UUIDs window.
Reclaim Zero Pages3
Opens the Reclaim Zero Pages window.
Stop Reclaiming Zero Pages3
Opens the Stop Reclaiming Zero Pages window.
Expand V-VOLs3
Opens the Expand V-VOLs window.
View Tier Properties3
Opens the View Tier Properties window.
Migrate Volumes3
Opens the Migrate Volumes window. For details, see Volume Migration User Guide.
Interrupt LDEV Task
Select Shred to display the Interrupt Shredding Task window.
Force Delete Pairs
-
TC Pairs: Opens the Force Delete Pairs (TC Pairs) window. For details, see the TrueCopy User Guide.
-
UR Pairs: Opens the Force Delete Pairs (UR Pairs) window. For details, see the Universal Replicator User Guide.
-
GAD Pairs: Opens the Force Delete Pairs (GAD Pairs) window. For details, see the Global-Active Device User Guide.
ALUs / SLUs3
Opens the ALUs / SLUs window.
Unbind SLUs3
Opens the Unbind SLUs window.
Export3
Opens a window where you can export configuration information listed in the table to a file that can be used for multiple purposes, such as backup or reporting.
1Does not appear by default. To display this item, change the Column Settings window.
2 If an MP unit is blocked due to a failure, the processing to be performed by the MP unit where the failure occurred is taken over by another normal MP unit. See "MP unit priorities after takeover" for priorities assumed by MP units after takeover.
3 Available when you click More Actions.