Adding CHAP users

To perform this task, following roles are required:

• Storage Administrator (Provisioning) role

• Security Administrator (View and Modify) role

1. Perform one of the following to display the tab.

For Command Suite:

• On the Resource tab, expand the Storage Systems tree. On the target storage system, click Port / Host Group. On the Ports / Host Groups / iSCSI Targets window, select the Host Groups / iSCSI Targets tab.

For Storage Navigator:

• To display all iSCSI targets in the storage system, expand the Storage Systems tree and select Ports / Hosts Groups / iSCSI Targets. Select the Host Groups / iSCSI Targets tab.

• To display iSCSI targets related to each port, expand the Storage Systems tree and select Ports / Hosts Groups / iSCSI Targets. Select the port in the tree, and select the iSCSI Targets tab on a port.

2. Select the iSCSI target to register CHAP users.

3. Display the Add CHAP Users window by performing one of the following:

• Click More Actions, select Add CHAP Users.

• From the Actions menu, select Ports/Host Groups, iSCSI, Authentication, then Add CHAP Users.

4. In the Available CHAP Users table, select the CHAP user row. Click Add.

The selected CHAP user registered in the Selected CHAP Users table.

If the CHAP user does not exist, perform following to register a new CHAP user:

1. Click Add New CHAP User under the Available CHAP Users table.

The Add New CHAP User dialog box opens.

2. Specify User Name and Secret.

3. Click OK to close the Add New CHAP User dialog box.

5. Click Finish to display the Confirm window.

6. Confirm the settings and enter the task name in the Task Name box.

A task name can consist of up to 32 ASCII characters (letters, numerals, and symbols). Task names are case-sensitive. (date) - (task name) is input by default.

7. Click Apply in the Confirm window.

If the Go to tasks window for status check box is selected, the Tasks window appears.