Configuring additional remote paths

You can configure additional remote paths as needed. A maximum of eight remote paths are supported.

Prerequisite information

• Review the path-related prerequisites in Adding remote connections.

Procedure

1. Open the Remote Connections window.

In Command Suite:

1. On the Resources tab, expand the Storage Systems tree.

2. Right-click the target storage system, and click Remote Connections.

In Device Manager - Storage Navigator:

1. Click Storage Systems, and then expand the Storage Systems tree.

2. In the Storage Systems tree, click Replication > Remote Connections.

2. In the Remote Connections window, click the Connections (To) tab.

3. In the Connections (To) tab, select the remote connection where the remote path is to be added.

4. In the Connections (To) tab, click More Actions > Add Remote Paths.

5. In the Add Remote Paths window, select the port type for Select Type, and then select the port to be used for both the local storage system and the remote storage system. If you select iSCSI, enter the IP address and the TCP port number for the remote storage system port. If you are adding 2 or more paths, click the Add Path button.

6. Click Finish.

7. In the Confirm window, review the settings and enter a task name in the Task Name box.

8. Click Apply to save your settings in the system.