Adding remote paths

You can add remote paths from the primary or secondary system.

Prerequisite information

• Required role: Storage Administrator (Remote Copy)

Procedure

1. Open the Remote Connections window.

In Command Suite: On the Resources tab, expand the Storage Systems tree, right-click the target storage system, and click Remote Connections.

In Device Manager - Storage Navigator: On the Resources tab, expand the Storage Systems tree, and then right-click the target storage system and click Remote Connections.

2. In the Connections (To) tab, select the remote connection you want to delete.

3. Click More Actions > Add Remote Paths to open the Add Remote Paths window.

4. In the Remote Paths box, select the port type, and then select the ports to be used for both the local storage system and the remote storage system. For an iSCSI port, enter the IP address and TCP port number for the remote storage system port. To add more than two paths, click + Add Path.

5. Click Finish.

6. In the Confirm window, review the settings and enter a task name in the Task Name box.

7. Click Apply to save your settings to the system.